Performance evaluation of multipoint communication on HIPPI over ATM networks

Kenji Kawahara, Hiroki Gotoh, Hideki Sunahara, Yuji Oie

Research output: Chapter in Book/Report/Conference proceedingChapter

Abstract

High Performance Parallel Interface (HIPPI) is primarily for channel technique and provides a simplex point-to-point interface for transferring data at a peak rate of 800 or 1600 Mbps over distances of up to 25 meters. In order to extend the use of HIPPl from a channel solution to a networking solution, the physical limitation of HIPPI must be solved. The HIPPI-ATM mapping can be one of the possible solutions and allow communication over a relatively long distance by using HIPPI-ATM converters. In this paper, we first suggest that the multipoint-to-multipoint communication of HIPPI over ATM networks does not perform well although an unique flow control between source-site and destination-site HIPPI-ATM converters is applied on each connection. In order to effectively establish multipoint-to-multipoint communication, we thus propose additional flow control schemes on HIPPI over ATM networks, that is, Peak-rate control scheme and Connection control scheme. We further formulate both throughput and packet transmission delay performance under these schemes and compare the performance and the complexity of the implementation of both schemes.

Original languageEnglish
Title of host publicationConference Record / IEEE Global Telecommunications Conference
PublisherIEEE
Pages1249-1255
Number of pages7
Volume2
Publication statusPublished - 1998
Externally publishedYes
EventProceedings of the IEEE GLOBECOM 1998 - The Bridge to the Global Integration - Sydney, NSW, Aust
Duration: 1998 Nov 81998 Nov 12

Other

OtherProceedings of the IEEE GLOBECOM 1998 - The Bridge to the Global Integration
CitySydney, NSW, Aust
Period98/11/898/11/12

Fingerprint

airborne thematic mapper
Asynchronous transfer mode
Automatic teller machines
communication
Flow control
Communication
flow control
Throughput
evaluation
networking

ASJC Scopus subject areas

  • Electrical and Electronic Engineering
  • Global and Planetary Change

Cite this

Kawahara, K., Gotoh, H., Sunahara, H., & Oie, Y. (1998). Performance evaluation of multipoint communication on HIPPI over ATM networks. In Conference Record / IEEE Global Telecommunications Conference (Vol. 2, pp. 1249-1255). IEEE.

Performance evaluation of multipoint communication on HIPPI over ATM networks. / Kawahara, Kenji; Gotoh, Hiroki; Sunahara, Hideki; Oie, Yuji.

Conference Record / IEEE Global Telecommunications Conference. Vol. 2 IEEE, 1998. p. 1249-1255.

Research output: Chapter in Book/Report/Conference proceedingChapter

Kawahara, K, Gotoh, H, Sunahara, H & Oie, Y 1998, Performance evaluation of multipoint communication on HIPPI over ATM networks. in Conference Record / IEEE Global Telecommunications Conference. vol. 2, IEEE, pp. 1249-1255, Proceedings of the IEEE GLOBECOM 1998 - The Bridge to the Global Integration, Sydney, NSW, Aust, 98/11/8.
Kawahara K, Gotoh H, Sunahara H, Oie Y. Performance evaluation of multipoint communication on HIPPI over ATM networks. In Conference Record / IEEE Global Telecommunications Conference. Vol. 2. IEEE. 1998. p. 1249-1255
Kawahara, Kenji ; Gotoh, Hiroki ; Sunahara, Hideki ; Oie, Yuji. / Performance evaluation of multipoint communication on HIPPI over ATM networks. Conference Record / IEEE Global Telecommunications Conference. Vol. 2 IEEE, 1998. pp. 1249-1255
@inbook{91d89e48f1d54bf08fe9eb3472a559f8,
title = "Performance evaluation of multipoint communication on HIPPI over ATM networks",
abstract = "High Performance Parallel Interface (HIPPI) is primarily for channel technique and provides a simplex point-to-point interface for transferring data at a peak rate of 800 or 1600 Mbps over distances of up to 25 meters. In order to extend the use of HIPPl from a channel solution to a networking solution, the physical limitation of HIPPI must be solved. The HIPPI-ATM mapping can be one of the possible solutions and allow communication over a relatively long distance by using HIPPI-ATM converters. In this paper, we first suggest that the multipoint-to-multipoint communication of HIPPI over ATM networks does not perform well although an unique flow control between source-site and destination-site HIPPI-ATM converters is applied on each connection. In order to effectively establish multipoint-to-multipoint communication, we thus propose additional flow control schemes on HIPPI over ATM networks, that is, Peak-rate control scheme and Connection control scheme. We further formulate both throughput and packet transmission delay performance under these schemes and compare the performance and the complexity of the implementation of both schemes.",
author = "Kenji Kawahara and Hiroki Gotoh and Hideki Sunahara and Yuji Oie",
year = "1998",
language = "English",
volume = "2",
pages = "1249--1255",
booktitle = "Conference Record / IEEE Global Telecommunications Conference",
publisher = "IEEE",

}

TY - CHAP

T1 - Performance evaluation of multipoint communication on HIPPI over ATM networks

AU - Kawahara, Kenji

AU - Gotoh, Hiroki

AU - Sunahara, Hideki

AU - Oie, Yuji

PY - 1998

Y1 - 1998

N2 - High Performance Parallel Interface (HIPPI) is primarily for channel technique and provides a simplex point-to-point interface for transferring data at a peak rate of 800 or 1600 Mbps over distances of up to 25 meters. In order to extend the use of HIPPl from a channel solution to a networking solution, the physical limitation of HIPPI must be solved. The HIPPI-ATM mapping can be one of the possible solutions and allow communication over a relatively long distance by using HIPPI-ATM converters. In this paper, we first suggest that the multipoint-to-multipoint communication of HIPPI over ATM networks does not perform well although an unique flow control between source-site and destination-site HIPPI-ATM converters is applied on each connection. In order to effectively establish multipoint-to-multipoint communication, we thus propose additional flow control schemes on HIPPI over ATM networks, that is, Peak-rate control scheme and Connection control scheme. We further formulate both throughput and packet transmission delay performance under these schemes and compare the performance and the complexity of the implementation of both schemes.

AB - High Performance Parallel Interface (HIPPI) is primarily for channel technique and provides a simplex point-to-point interface for transferring data at a peak rate of 800 or 1600 Mbps over distances of up to 25 meters. In order to extend the use of HIPPl from a channel solution to a networking solution, the physical limitation of HIPPI must be solved. The HIPPI-ATM mapping can be one of the possible solutions and allow communication over a relatively long distance by using HIPPI-ATM converters. In this paper, we first suggest that the multipoint-to-multipoint communication of HIPPI over ATM networks does not perform well although an unique flow control between source-site and destination-site HIPPI-ATM converters is applied on each connection. In order to effectively establish multipoint-to-multipoint communication, we thus propose additional flow control schemes on HIPPI over ATM networks, that is, Peak-rate control scheme and Connection control scheme. We further formulate both throughput and packet transmission delay performance under these schemes and compare the performance and the complexity of the implementation of both schemes.

UR - http://www.scopus.com/inward/record.url?scp=0032256832&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0032256832&partnerID=8YFLogxK

M3 - Chapter

VL - 2

SP - 1249

EP - 1255

BT - Conference Record / IEEE Global Telecommunications Conference

PB - IEEE

ER -