Plasma exhaust and divertor studies in Japan and Europe broader approach, DEMO design activity

Nobuyuki Asakura, Kazuo Hoshino, Hiroyasu Utoh, Youji Someya, Satoshi Suzuki, Christian Bachmann, Holger Reimerdes, Ronald Wenninger, Hironobu Kudo, Shinsuke Tokunaga, Yuki Homma, Yoshiteru Sakamoto, Ryoji Hiwatari, Kenji Tobita, Jeong Ha You, Gianfranco Federici, Koichiro Ezato, Yohji Seki, Yoshio Ueda, Noriyasu Ohno

Research output: Contribution to journalArticle

5 Citations (Scopus)

Abstract

Power exhaust scenario and divertor design for a steady-state Japan (JA) DEMO and a pulse Europe (EU) DEMO1 have been investigated as one of the most important common issues in Broader Approach DEMO Design Activity. Radiative cooling is a common approach for the power exhaust scenario. For the JA DEMO, development of the divertor design appropriate for high Psep/Rp ∼30 MW m−1 is required, while the radiation fraction in the main plasma (frad main = Prad main/Pheat) is ITER-level (0.40–0.45) and the exhaust power above the L- to H-mode power threshold (fLH = Psep/Pth LH) is large margin (∼2). For the EU DEMO1, larger frad main (=0.67) and smaller fLH (=1.2) plasma is required, using higher-Z impurity seeding, in order to apply ITER-level divertor (Psep/Rp = 17 MW m−1). ITER technology, i.e. water cooling with W-monoblock and Cu-alloy (CuCrZr) heat sink, is a baseline for JA and EU to handle the peak heat load of 10 MW m−2-level, and neutron flux and irradiation dose are comparable. For the JA DEMO, two different water-cooling pipes, i.e. CuCrZr and F82H steel, are proposed. For the EU DEMO1, the heat sink consists of all Cu-alloy pipe, and the divertor size is reduced with replacing the baffles by the breeding blankets. Choices of the heat sink components have been developed appropriate to the high irradiation dose condition. These JA and EU approaches of the power exhaust scenario will provide important case studies for the future decision of the DEMO divertor design.

Original languageEnglish
JournalFusion Engineering and Design
DOIs
Publication statusAccepted/In press - 2018 Jan 1
Externally publishedYes

Keywords

  • Broader Approach DEMO Design Activity (BA DDA)
  • DEMO
  • Divertor design
  • Impurity seeding
  • Power exhaust
  • Water-coolong divertor

ASJC Scopus subject areas

  • Civil and Structural Engineering
  • Nuclear Energy and Engineering
  • Materials Science(all)
  • Mechanical Engineering

Fingerprint Dive into the research topics of 'Plasma exhaust and divertor studies in Japan and Europe broader approach, DEMO design activity'. Together they form a unique fingerprint.

  • Cite this

    Asakura, N., Hoshino, K., Utoh, H., Someya, Y., Suzuki, S., Bachmann, C., Reimerdes, H., Wenninger, R., Kudo, H., Tokunaga, S., Homma, Y., Sakamoto, Y., Hiwatari, R., Tobita, K., You, J. H., Federici, G., Ezato, K., Seki, Y., Ueda, Y., & Ohno, N. (Accepted/In press). Plasma exhaust and divertor studies in Japan and Europe broader approach, DEMO design activity. Fusion Engineering and Design. https://doi.org/10.1016/j.fusengdes.2018.04.104