Post-sintering of apatite ceramics from fine powders synthesized under hydrothermal conditions

Koji Ioku, Masahiro Yoshimura, Shigeyuki Somiya

Research output: Contribution to journalArticle

9 Citations (Scopus)

Abstract

Hydroxyapatite fine powders prepared from (NH4)2HPO4 and Ca(NO3)2 by a wet method were treated under hydrothermal conditions at 200°C under 2MPa for 10h. The obtained single-crystal fine powders of 90nm × 25nm were sintered in air at a temperature from 1000°C to 1100°C for 3h. The obtained ceramics with relative densities of 73±2% (1000°C) - 92±2% (1100°C) were HIP'ed at 1000°C under 200MPa of Ar for 1h without any capsules. The post-sintering brought about densification up to 99% for the samples of more than 90% dense having closed pores, but it barely increased the density of samples with lower densities. Transparent apatite ceramics were obtained by HIP.

Original languageEnglish
Pages (from-to)111-112
Number of pages2
JournalJournal of the Ceramic Society of Japan. International ed.
Volume96
Issue number1
Publication statusPublished - 1988 Jan
Externally publishedYes

Fingerprint

Hot isostatic pressing
Apatite
Sintering
Powders
Densification
Hydroxyapatite
Single crystals
Air
Temperature

ASJC Scopus subject areas

  • Engineering(all)

Cite this

Post-sintering of apatite ceramics from fine powders synthesized under hydrothermal conditions. / Ioku, Koji; Yoshimura, Masahiro; Somiya, Shigeyuki.

In: Journal of the Ceramic Society of Japan. International ed., Vol. 96, No. 1, 01.1988, p. 111-112.

Research output: Contribution to journalArticle

@article{fe820964861b43fa876079e1b776f02f,
title = "Post-sintering of apatite ceramics from fine powders synthesized under hydrothermal conditions",
abstract = "Hydroxyapatite fine powders prepared from (NH4)2HPO4 and Ca(NO3)2 by a wet method were treated under hydrothermal conditions at 200°C under 2MPa for 10h. The obtained single-crystal fine powders of 90nm × 25nm were sintered in air at a temperature from 1000°C to 1100°C for 3h. The obtained ceramics with relative densities of 73±2{\%} (1000°C) - 92±2{\%} (1100°C) were HIP'ed at 1000°C under 200MPa of Ar for 1h without any capsules. The post-sintering brought about densification up to 99{\%} for the samples of more than 90{\%} dense having closed pores, but it barely increased the density of samples with lower densities. Transparent apatite ceramics were obtained by HIP.",
author = "Koji Ioku and Masahiro Yoshimura and Shigeyuki Somiya",
year = "1988",
month = "1",
language = "English",
volume = "96",
pages = "111--112",
journal = "Journal of the Ceramic Society of Japan. International ed.",
issn = "0912-9200",
number = "1",

}

TY - JOUR

T1 - Post-sintering of apatite ceramics from fine powders synthesized under hydrothermal conditions

AU - Ioku, Koji

AU - Yoshimura, Masahiro

AU - Somiya, Shigeyuki

PY - 1988/1

Y1 - 1988/1

N2 - Hydroxyapatite fine powders prepared from (NH4)2HPO4 and Ca(NO3)2 by a wet method were treated under hydrothermal conditions at 200°C under 2MPa for 10h. The obtained single-crystal fine powders of 90nm × 25nm were sintered in air at a temperature from 1000°C to 1100°C for 3h. The obtained ceramics with relative densities of 73±2% (1000°C) - 92±2% (1100°C) were HIP'ed at 1000°C under 200MPa of Ar for 1h without any capsules. The post-sintering brought about densification up to 99% for the samples of more than 90% dense having closed pores, but it barely increased the density of samples with lower densities. Transparent apatite ceramics were obtained by HIP.

AB - Hydroxyapatite fine powders prepared from (NH4)2HPO4 and Ca(NO3)2 by a wet method were treated under hydrothermal conditions at 200°C under 2MPa for 10h. The obtained single-crystal fine powders of 90nm × 25nm were sintered in air at a temperature from 1000°C to 1100°C for 3h. The obtained ceramics with relative densities of 73±2% (1000°C) - 92±2% (1100°C) were HIP'ed at 1000°C under 200MPa of Ar for 1h without any capsules. The post-sintering brought about densification up to 99% for the samples of more than 90% dense having closed pores, but it barely increased the density of samples with lower densities. Transparent apatite ceramics were obtained by HIP.

UR - http://www.scopus.com/inward/record.url?scp=0023824765&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0023824765&partnerID=8YFLogxK

M3 - Article

VL - 96

SP - 111

EP - 112

JO - Journal of the Ceramic Society of Japan. International ed.

JF - Journal of the Ceramic Society of Japan. International ed.

SN - 0912-9200

IS - 1

ER -