Precise core alignment in fabrication of polymer optical waveguides using the Mosquito method for three-dimensional optical circuits

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Abstract

Polymer optical waveguides fabricated using the Mosquito method are expected to realize high bandwidth density 3-dimensional (3-D) on-board wiring. In the Mosquito method, the waveguides are fabricated by dispensing a liquid core monomer into a liquid cladding monomer using a microdispenser. Hence, for the on-board applications particularly 3-D wiring, the core position and alignment accuracies are important to couple the waveguides with the other optical components with high efficiency. We already succeeded in fabricating graded-index core multimode polymer optical waveguides with low propagation loss using the Mosquito method. However, the positions of the formed cores tended to deviate from the original design, since both the core and cladding monomers are in the liquid state during the Mosquito process. In this paper, we apply a fluid analysis simulation using a COMSOL Multiphysics® in order to theoretically simulate the influence of several fabrication parameters on the core position. The calculated core height deviation from the designed height is dependent on the needle-Tip height, because the core positions are influenced by the pressure distribution of cladding monomer caused by the monomer flow. Meanwhile, we find that the monomer wetting on the needle outer wall also affects the core height. When the effect of monomer wetting is taken into account, the simulated core heights are different from the results without the effect of monomer wetting and we can theoretically predict the height of the formed core. Finally, we confirm that the core height can be controlled by adjusting the needle-Tip height setting in which the effect of the monomer flow and wetting theoretically calculated is taken into account in the Mosquito method.

Original languageEnglish
Title of host publicationIntegrated Optics
Subtitle of host publicationDevices, Materials, and Technologies XXII
PublisherSPIE
Volume10535
ISBN (Electronic)9781510615557
DOIs
Publication statusPublished - 2018 Jan 1
EventIntegrated Optics: Devices, Materials, and Technologies XXII 2018 - San Francisco, United States
Duration: 2018 Jan 292018 Feb 1

Other

OtherIntegrated Optics: Devices, Materials, and Technologies XXII 2018
CountryUnited States
CitySan Francisco
Period18/1/2918/2/1

Fingerprint

Polymer Waveguide
Optical Waveguides
Optical waveguides
optical waveguides
Fabrication
Polymers
Alignment
Monomers
alignment
Three-dimensional
fabrication
Networks (circuits)
monomers
Wetting
polymers
Needles
wetting
Liquid
needles
Electric wiring

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Condensed Matter Physics
  • Computer Science Applications
  • Applied Mathematics
  • Electrical and Electronic Engineering

Cite this

Precise core alignment in fabrication of polymer optical waveguides using the Mosquito method for three-dimensional optical circuits. / Date, Kumi; Fukagata, Koji; Ishigure, Takaaki.

Integrated Optics: Devices, Materials, and Technologies XXII. Vol. 10535 SPIE, 2018. 105351Y.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Date, K, Fukagata, K & Ishigure, T 2018, Precise core alignment in fabrication of polymer optical waveguides using the Mosquito method for three-dimensional optical circuits. in Integrated Optics: Devices, Materials, and Technologies XXII. vol. 10535, 105351Y, SPIE, Integrated Optics: Devices, Materials, and Technologies XXII 2018, San Francisco, United States, 18/1/29. https://doi.org/10.1117/12.2289206
@inproceedings{f492f63b1578496994ef346f4478604d,
title = "Precise core alignment in fabrication of polymer optical waveguides using the Mosquito method for three-dimensional optical circuits",
abstract = "Polymer optical waveguides fabricated using the Mosquito method are expected to realize high bandwidth density 3-dimensional (3-D) on-board wiring. In the Mosquito method, the waveguides are fabricated by dispensing a liquid core monomer into a liquid cladding monomer using a microdispenser. Hence, for the on-board applications particularly 3-D wiring, the core position and alignment accuracies are important to couple the waveguides with the other optical components with high efficiency. We already succeeded in fabricating graded-index core multimode polymer optical waveguides with low propagation loss using the Mosquito method. However, the positions of the formed cores tended to deviate from the original design, since both the core and cladding monomers are in the liquid state during the Mosquito process. In this paper, we apply a fluid analysis simulation using a COMSOL Multiphysics{\circledR} in order to theoretically simulate the influence of several fabrication parameters on the core position. The calculated core height deviation from the designed height is dependent on the needle-Tip height, because the core positions are influenced by the pressure distribution of cladding monomer caused by the monomer flow. Meanwhile, we find that the monomer wetting on the needle outer wall also affects the core height. When the effect of monomer wetting is taken into account, the simulated core heights are different from the results without the effect of monomer wetting and we can theoretically predict the height of the formed core. Finally, we confirm that the core height can be controlled by adjusting the needle-Tip height setting in which the effect of the monomer flow and wetting theoretically calculated is taken into account in the Mosquito method.",
author = "Kumi Date and Koji Fukagata and Takaaki Ishigure",
year = "2018",
month = "1",
day = "1",
doi = "10.1117/12.2289206",
language = "English",
volume = "10535",
booktitle = "Integrated Optics",
publisher = "SPIE",

}

TY - GEN

T1 - Precise core alignment in fabrication of polymer optical waveguides using the Mosquito method for three-dimensional optical circuits

AU - Date, Kumi

AU - Fukagata, Koji

AU - Ishigure, Takaaki

PY - 2018/1/1

Y1 - 2018/1/1

N2 - Polymer optical waveguides fabricated using the Mosquito method are expected to realize high bandwidth density 3-dimensional (3-D) on-board wiring. In the Mosquito method, the waveguides are fabricated by dispensing a liquid core monomer into a liquid cladding monomer using a microdispenser. Hence, for the on-board applications particularly 3-D wiring, the core position and alignment accuracies are important to couple the waveguides with the other optical components with high efficiency. We already succeeded in fabricating graded-index core multimode polymer optical waveguides with low propagation loss using the Mosquito method. However, the positions of the formed cores tended to deviate from the original design, since both the core and cladding monomers are in the liquid state during the Mosquito process. In this paper, we apply a fluid analysis simulation using a COMSOL Multiphysics® in order to theoretically simulate the influence of several fabrication parameters on the core position. The calculated core height deviation from the designed height is dependent on the needle-Tip height, because the core positions are influenced by the pressure distribution of cladding monomer caused by the monomer flow. Meanwhile, we find that the monomer wetting on the needle outer wall also affects the core height. When the effect of monomer wetting is taken into account, the simulated core heights are different from the results without the effect of monomer wetting and we can theoretically predict the height of the formed core. Finally, we confirm that the core height can be controlled by adjusting the needle-Tip height setting in which the effect of the monomer flow and wetting theoretically calculated is taken into account in the Mosquito method.

AB - Polymer optical waveguides fabricated using the Mosquito method are expected to realize high bandwidth density 3-dimensional (3-D) on-board wiring. In the Mosquito method, the waveguides are fabricated by dispensing a liquid core monomer into a liquid cladding monomer using a microdispenser. Hence, for the on-board applications particularly 3-D wiring, the core position and alignment accuracies are important to couple the waveguides with the other optical components with high efficiency. We already succeeded in fabricating graded-index core multimode polymer optical waveguides with low propagation loss using the Mosquito method. However, the positions of the formed cores tended to deviate from the original design, since both the core and cladding monomers are in the liquid state during the Mosquito process. In this paper, we apply a fluid analysis simulation using a COMSOL Multiphysics® in order to theoretically simulate the influence of several fabrication parameters on the core position. The calculated core height deviation from the designed height is dependent on the needle-Tip height, because the core positions are influenced by the pressure distribution of cladding monomer caused by the monomer flow. Meanwhile, we find that the monomer wetting on the needle outer wall also affects the core height. When the effect of monomer wetting is taken into account, the simulated core heights are different from the results without the effect of monomer wetting and we can theoretically predict the height of the formed core. Finally, we confirm that the core height can be controlled by adjusting the needle-Tip height setting in which the effect of the monomer flow and wetting theoretically calculated is taken into account in the Mosquito method.

UR - http://www.scopus.com/inward/record.url?scp=85047768734&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85047768734&partnerID=8YFLogxK

U2 - 10.1117/12.2289206

DO - 10.1117/12.2289206

M3 - Conference contribution

VL - 10535

BT - Integrated Optics

PB - SPIE

ER -