Protein adsorption and platelet adhesion onto polyurethane grafted with methoxy‐poly(ethylene glycol) methacrylate by plasma technique

Keiji Fujimoto, Hiroyuki Inoue, Yoshito Ikada

Research output: Contribution to journalArticle

84 Citations (Scopus)

Abstract

Graft polymerization of methoxy‐poly(ethylene glycol) methacrylate, an ester of methacrylic acid and monomethoxy‐poly(ethylene glycol) (PEO), was performed onto a polyetherurethane (PU) film and tube under different polymerization conditions by a plasma treatment technique. The surface of grafted PU film was characterized by staining with dye, x‐ray photoelectron spectroscopy, contact angle, and zeta potential. All these measurements indicated that water‐soluble chains were immobilized on the PU surface, their location being restricted to the film surface region. The PU surface showed reduced protein adsorption in vitro and reduced platelet adhesion in vitro and ex vivo. The optimum graft density suppressing the protein adsorption was as low as 5 μg cm−2. When a small amount of dimethacrylate was added to the monomer solution for graft polymerization to introduce crosslinking in the grafted layer, protein adsorption was further slightly reduced. The extent of reduction in serum albumin adsorption was always less than that of γ‐globulin. Although platelet adhesion was largely reduced by the surface graft polymerization, a definite amount of protein was always adsorbed to the grafted surface. © 1993 John Wiley & Sons, Inc.

Original languageEnglish
Pages (from-to)1559-1567
Number of pages9
JournalJournal of Biomedical Materials Research
Volume27
Issue number12
DOIs
Publication statusPublished - 1993 Dec
Externally publishedYes

ASJC Scopus subject areas

  • Biomaterials
  • Biomedical Engineering

Fingerprint Dive into the research topics of 'Protein adsorption and platelet adhesion onto polyurethane grafted with methoxy‐poly(ethylene glycol) methacrylate by plasma technique'. Together they form a unique fingerprint.

  • Cite this