Rate control for high-speed burst transmission with quick response in universal ATM-WAN, ALPEN

Haruhisa Hasegawa, Naoaki Yamanaka, Kohei Shiomoto

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Abstract

This paper proposes a rate control technique for high-speed burst transmission with quick response in ALPEN, an ATM Multi-protocol Emulation Network. Under lower load, it is desirable for the network to allow very quick burst access to a lot of bandwidth, like UBR. Under higher load, a mechanism for congestion avoidance or recovery is required, like ABR. The rate control technique proposed in this paper provides both properties. In ALPEN, the transit switch sends only information about the residual bandwidth to the source side edge switch. The edge switch responds to user requests quickly because it knows route status. This is very effective because long delay in ATM-WAN reduces response performance. The proposed technique improves ATM-WAN performance because it has a algorithm to collect the information about route status without using any knowledge about delay length. Its performance is confirmed by simulations.

Original languageEnglish
Title of host publicationIEEE International Conference on Communications
PublisherIEEE
Pages1734-1738
Number of pages5
Volume3
Publication statusPublished - 1997
Externally publishedYes
EventProceedings of the 1997 IEEE International Conference on Communications, ICC. Part 3 (of 3) - Montreal, Can
Duration: 1997 Jun 81997 Jun 12

Other

OtherProceedings of the 1997 IEEE International Conference on Communications, ICC. Part 3 (of 3)
CityMontreal, Can
Period97/6/897/6/12

Fingerprint

Wide area networks
Automatic teller machines
Switches
Bandwidth
Network protocols
Recovery

ASJC Scopus subject areas

  • Engineering(all)

Cite this

Hasegawa, H., Yamanaka, N., & Shiomoto, K. (1997). Rate control for high-speed burst transmission with quick response in universal ATM-WAN, ALPEN. In IEEE International Conference on Communications (Vol. 3, pp. 1734-1738). IEEE.

Rate control for high-speed burst transmission with quick response in universal ATM-WAN, ALPEN. / Hasegawa, Haruhisa; Yamanaka, Naoaki; Shiomoto, Kohei.

IEEE International Conference on Communications. Vol. 3 IEEE, 1997. p. 1734-1738.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Hasegawa, H, Yamanaka, N & Shiomoto, K 1997, Rate control for high-speed burst transmission with quick response in universal ATM-WAN, ALPEN. in IEEE International Conference on Communications. vol. 3, IEEE, pp. 1734-1738, Proceedings of the 1997 IEEE International Conference on Communications, ICC. Part 3 (of 3), Montreal, Can, 97/6/8.
Hasegawa H, Yamanaka N, Shiomoto K. Rate control for high-speed burst transmission with quick response in universal ATM-WAN, ALPEN. In IEEE International Conference on Communications. Vol. 3. IEEE. 1997. p. 1734-1738
Hasegawa, Haruhisa ; Yamanaka, Naoaki ; Shiomoto, Kohei. / Rate control for high-speed burst transmission with quick response in universal ATM-WAN, ALPEN. IEEE International Conference on Communications. Vol. 3 IEEE, 1997. pp. 1734-1738
@inproceedings{7656b0a3e6664aeb95f0cf20c2447a33,
title = "Rate control for high-speed burst transmission with quick response in universal ATM-WAN, ALPEN",
abstract = "This paper proposes a rate control technique for high-speed burst transmission with quick response in ALPEN, an ATM Multi-protocol Emulation Network. Under lower load, it is desirable for the network to allow very quick burst access to a lot of bandwidth, like UBR. Under higher load, a mechanism for congestion avoidance or recovery is required, like ABR. The rate control technique proposed in this paper provides both properties. In ALPEN, the transit switch sends only information about the residual bandwidth to the source side edge switch. The edge switch responds to user requests quickly because it knows route status. This is very effective because long delay in ATM-WAN reduces response performance. The proposed technique improves ATM-WAN performance because it has a algorithm to collect the information about route status without using any knowledge about delay length. Its performance is confirmed by simulations.",
author = "Haruhisa Hasegawa and Naoaki Yamanaka and Kohei Shiomoto",
year = "1997",
language = "English",
volume = "3",
pages = "1734--1738",
booktitle = "IEEE International Conference on Communications",
publisher = "IEEE",

}

TY - GEN

T1 - Rate control for high-speed burst transmission with quick response in universal ATM-WAN, ALPEN

AU - Hasegawa, Haruhisa

AU - Yamanaka, Naoaki

AU - Shiomoto, Kohei

PY - 1997

Y1 - 1997

N2 - This paper proposes a rate control technique for high-speed burst transmission with quick response in ALPEN, an ATM Multi-protocol Emulation Network. Under lower load, it is desirable for the network to allow very quick burst access to a lot of bandwidth, like UBR. Under higher load, a mechanism for congestion avoidance or recovery is required, like ABR. The rate control technique proposed in this paper provides both properties. In ALPEN, the transit switch sends only information about the residual bandwidth to the source side edge switch. The edge switch responds to user requests quickly because it knows route status. This is very effective because long delay in ATM-WAN reduces response performance. The proposed technique improves ATM-WAN performance because it has a algorithm to collect the information about route status without using any knowledge about delay length. Its performance is confirmed by simulations.

AB - This paper proposes a rate control technique for high-speed burst transmission with quick response in ALPEN, an ATM Multi-protocol Emulation Network. Under lower load, it is desirable for the network to allow very quick burst access to a lot of bandwidth, like UBR. Under higher load, a mechanism for congestion avoidance or recovery is required, like ABR. The rate control technique proposed in this paper provides both properties. In ALPEN, the transit switch sends only information about the residual bandwidth to the source side edge switch. The edge switch responds to user requests quickly because it knows route status. This is very effective because long delay in ATM-WAN reduces response performance. The proposed technique improves ATM-WAN performance because it has a algorithm to collect the information about route status without using any knowledge about delay length. Its performance is confirmed by simulations.

UR - http://www.scopus.com/inward/record.url?scp=0030675389&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0030675389&partnerID=8YFLogxK

M3 - Conference contribution

AN - SCOPUS:0030675389

VL - 3

SP - 1734

EP - 1738

BT - IEEE International Conference on Communications

PB - IEEE

ER -