Reduction of motion data by using motion assembly system for haptic database

Yusuke Kasahara, Kouhei Ohnishi, Kazuki Nagase, Seiichiro Katsura

Research output: Contribution to journalArticle

2 Citations (Scopus)

Abstract

Recently, extensive research has been carried out on the preservation of human skill, a promising means of education and training. In the future, construction of motion database networks is required to preserve and utilize various skills. However, large-capacity data storage devices are required to save as many motion patterns as possible. Data compression methods based on signal processing are typically employed for data reduction. These methods, however, involve extensive and complex calculation and afford poor motion reproducibility. This paper presents a system for reducing motion data; this system has been designed without considering data compression methods. The proposed system is defined as a motion assembly system. During motion saving, the motion data measured by a master-slave system are saved and decomposed into a grasping mode and a manipulation mode. During motion reproduction, the data corresponding to the reproduced motion are generated by the assembly of the saved grasping and manipulation modes. Various motion patterns are reproduced by using some functional elements.

Original languageEnglish
JournalIEEJ Transactions on Industry Applications
Volume130
Issue number9
Publication statusPublished - 2010

Fingerprint

Data compression
Data reduction
Signal processing
Education

Keywords

  • Bilateral control
  • Haptics
  • Modal decomposition
  • Motion abstraction
  • Motion assembly system

ASJC Scopus subject areas

  • Electrical and Electronic Engineering
  • Industrial and Manufacturing Engineering

Cite this

Reduction of motion data by using motion assembly system for haptic database. / Kasahara, Yusuke; Ohnishi, Kouhei; Nagase, Kazuki; Katsura, Seiichiro.

In: IEEJ Transactions on Industry Applications, Vol. 130, No. 9, 2010.

Research output: Contribution to journalArticle

@article{f644fb9186b043c6babd8bade6f18f91,
title = "Reduction of motion data by using motion assembly system for haptic database",
abstract = "Recently, extensive research has been carried out on the preservation of human skill, a promising means of education and training. In the future, construction of motion database networks is required to preserve and utilize various skills. However, large-capacity data storage devices are required to save as many motion patterns as possible. Data compression methods based on signal processing are typically employed for data reduction. These methods, however, involve extensive and complex calculation and afford poor motion reproducibility. This paper presents a system for reducing motion data; this system has been designed without considering data compression methods. The proposed system is defined as a motion assembly system. During motion saving, the motion data measured by a master-slave system are saved and decomposed into a grasping mode and a manipulation mode. During motion reproduction, the data corresponding to the reproduced motion are generated by the assembly of the saved grasping and manipulation modes. Various motion patterns are reproduced by using some functional elements.",
keywords = "Bilateral control, Haptics, Modal decomposition, Motion abstraction, Motion assembly system",
author = "Yusuke Kasahara and Kouhei Ohnishi and Kazuki Nagase and Seiichiro Katsura",
year = "2010",
language = "English",
volume = "130",
journal = "IEEJ Transactions on Industry Applications",
issn = "0913-6339",
publisher = "The Institute of Electrical Engineers of Japan",
number = "9",

}

TY - JOUR

T1 - Reduction of motion data by using motion assembly system for haptic database

AU - Kasahara, Yusuke

AU - Ohnishi, Kouhei

AU - Nagase, Kazuki

AU - Katsura, Seiichiro

PY - 2010

Y1 - 2010

N2 - Recently, extensive research has been carried out on the preservation of human skill, a promising means of education and training. In the future, construction of motion database networks is required to preserve and utilize various skills. However, large-capacity data storage devices are required to save as many motion patterns as possible. Data compression methods based on signal processing are typically employed for data reduction. These methods, however, involve extensive and complex calculation and afford poor motion reproducibility. This paper presents a system for reducing motion data; this system has been designed without considering data compression methods. The proposed system is defined as a motion assembly system. During motion saving, the motion data measured by a master-slave system are saved and decomposed into a grasping mode and a manipulation mode. During motion reproduction, the data corresponding to the reproduced motion are generated by the assembly of the saved grasping and manipulation modes. Various motion patterns are reproduced by using some functional elements.

AB - Recently, extensive research has been carried out on the preservation of human skill, a promising means of education and training. In the future, construction of motion database networks is required to preserve and utilize various skills. However, large-capacity data storage devices are required to save as many motion patterns as possible. Data compression methods based on signal processing are typically employed for data reduction. These methods, however, involve extensive and complex calculation and afford poor motion reproducibility. This paper presents a system for reducing motion data; this system has been designed without considering data compression methods. The proposed system is defined as a motion assembly system. During motion saving, the motion data measured by a master-slave system are saved and decomposed into a grasping mode and a manipulation mode. During motion reproduction, the data corresponding to the reproduced motion are generated by the assembly of the saved grasping and manipulation modes. Various motion patterns are reproduced by using some functional elements.

KW - Bilateral control

KW - Haptics

KW - Modal decomposition

KW - Motion abstraction

KW - Motion assembly system

UR - http://www.scopus.com/inward/record.url?scp=78049433796&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=78049433796&partnerID=8YFLogxK

M3 - Article

AN - SCOPUS:78049433796

VL - 130

JO - IEEJ Transactions on Industry Applications

JF - IEEJ Transactions on Industry Applications

SN - 0913-6339

IS - 9

ER -