Repairing surface defects of Zr-based metallic glass ribbons by nanosecond pulsed laser irradiation

Jingtao Wang; Hongyang Zhang; Zhiyu Zhang; Jing Hong; Yongfeng Qian; Hu Huang; Jiwang Yan

doi:10.1016/j.mfglet.2022.11.008

Repairing surface defects of Zr-based metallic glass ribbons by nanosecond pulsed laser irradiation

Jingtao Wang, Hongyang Zhang, Zhiyu Zhang, Jing Hong, Yongfeng Qian, Hu Huang, Jiwang Yan

Department of Mechanical Engineering

Research output: Contribution to journal › Article › peer-review

Abstract

The metallic glass ribbons (MGRs) industrially produced by the single roller melt-spun method have many surface defects such as pits and scratches. In this study, it was attempted to repair the surface defects of Zr-based MGRs via nanosecond pulsed laser irradiation. The experimental results showed that the roughness of laser-repaired surfaces was significantly reduced compared to the melt-spun surface, and the surface topographies and morphologies were sensitive to the laser parameters. With optimal laser parameters, the smooth and defect-free surface could be achieved. This work offers a convenient and high-efficiency approach for repairing the surface defects of MGRs.

Original language	English
Pages (from-to)	48-52
Number of pages	5
Journal	Manufacturing Letters
Volume	35
DOIs	https://doi.org/10.1016/j.mfglet.2022.11.008
Publication status	Published - 2023 Jan

Keywords

Amorphous materials
Laser processing
Metallic glass ribbon
Nanosecond pulsed laser
Surface defects

ASJC Scopus subject areas

Mechanics of Materials
Industrial and Manufacturing Engineering

Access to Document

10.1016/j.mfglet.2022.11.008

Cite this

@article{9c80327023c3422e90d073f2e7db867a,

title = "Repairing surface defects of Zr-based metallic glass ribbons by nanosecond pulsed laser irradiation",

abstract = "The metallic glass ribbons (MGRs) industrially produced by the single roller melt-spun method have many surface defects such as pits and scratches. In this study, it was attempted to repair the surface defects of Zr-based MGRs via nanosecond pulsed laser irradiation. The experimental results showed that the roughness of laser-repaired surfaces was significantly reduced compared to the melt-spun surface, and the surface topographies and morphologies were sensitive to the laser parameters. With optimal laser parameters, the smooth and defect-free surface could be achieved. This work offers a convenient and high-efficiency approach for repairing the surface defects of MGRs.",

keywords = "Amorphous materials, Laser processing, Metallic glass ribbon, Nanosecond pulsed laser, Surface defects",

author = "Jingtao Wang and Hongyang Zhang and Zhiyu Zhang and Jing Hong and Yongfeng Qian and Hu Huang and Jiwang Yan",

note = "Funding Information: This work was supported by the Natural Science Foundation of Jilin Province (20220101198JC) and the National Natural Science Foundation of China (Grant No. 51705197). Publisher Copyright: {\textcopyright} 2022 Society of Manufacturing Engineers (SME)",

year = "2023",

month = jan,

doi = "10.1016/j.mfglet.2022.11.008",

language = "English",

volume = "35",

pages = "48--52",

journal = "Manufacturing Letters",

issn = "2213-8463",

publisher = "Society of Manufacturing Engineers",

}

TY - JOUR

T1 - Repairing surface defects of Zr-based metallic glass ribbons by nanosecond pulsed laser irradiation

AU - Wang, Jingtao

AU - Zhang, Hongyang

AU - Zhang, Zhiyu

AU - Hong, Jing

AU - Qian, Yongfeng

AU - Huang, Hu

AU - Yan, Jiwang

N1 - Funding Information: This work was supported by the Natural Science Foundation of Jilin Province (20220101198JC) and the National Natural Science Foundation of China (Grant No. 51705197). Publisher Copyright: © 2022 Society of Manufacturing Engineers (SME)

PY - 2023/1

Y1 - 2023/1

N2 - The metallic glass ribbons (MGRs) industrially produced by the single roller melt-spun method have many surface defects such as pits and scratches. In this study, it was attempted to repair the surface defects of Zr-based MGRs via nanosecond pulsed laser irradiation. The experimental results showed that the roughness of laser-repaired surfaces was significantly reduced compared to the melt-spun surface, and the surface topographies and morphologies were sensitive to the laser parameters. With optimal laser parameters, the smooth and defect-free surface could be achieved. This work offers a convenient and high-efficiency approach for repairing the surface defects of MGRs.

AB - The metallic glass ribbons (MGRs) industrially produced by the single roller melt-spun method have many surface defects such as pits and scratches. In this study, it was attempted to repair the surface defects of Zr-based MGRs via nanosecond pulsed laser irradiation. The experimental results showed that the roughness of laser-repaired surfaces was significantly reduced compared to the melt-spun surface, and the surface topographies and morphologies were sensitive to the laser parameters. With optimal laser parameters, the smooth and defect-free surface could be achieved. This work offers a convenient and high-efficiency approach for repairing the surface defects of MGRs.

KW - Amorphous materials

KW - Laser processing

KW - Metallic glass ribbon

KW - Nanosecond pulsed laser

KW - Surface defects

UR - http://www.scopus.com/inward/record.url?scp=85144619172&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85144619172&partnerID=8YFLogxK

U2 - 10.1016/j.mfglet.2022.11.008

DO - 10.1016/j.mfglet.2022.11.008

M3 - Article

AN - SCOPUS:85144619172

SN - 2213-8463

VL - 35

SP - 48

EP - 52

JO - Manufacturing Letters

JF - Manufacturing Letters

ER -

Repairing surface defects of Zr-based metallic glass ribbons by nanosecond pulsed laser irradiation

Abstract

Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this