Reproduction control of rubbing motion taking friction variation into account

Ryutaro Honjo, Seiichiro Katsura

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Abstract

This paper proposes a motion-reproduction method for a multi degree-of-freedom system. For extraction and reproduction of haptic information, motion-copying system was previously proposed. However motion-copying system has a drawback; it is difficult to reproduce the saved motion when the environmental configuration in the motion-loading phase is different from that in the motion-saving phase. There are many methods for adapting variation of environmental configuration. However, in conventional methods the orthogonal axial motors are controlled independently. In the tracing motion, there is a friction and interference between orthogonal axes occurs. Thus, it is impossible to reproduce the saved motion when the coefficient of friction is varied. In this paper, amount of the force information is focused and motion-reproduction method which controls synthetic force using two degree-of-freedom system is proposed. The synthetic force is a total magnitude of the force information and it is important to conduct a human motion. To show the validity of the proposed method, experiments were conducted.

Original languageEnglish
Title of host publicationIECON Proceedings (Industrial Electronics Conference)
PublisherInstitute of Electrical and Electronics Engineers Inc.
Pages2853-2858
Number of pages6
Volume40th Annual Conference of the IEEE Industrial Electronics Society, IECON 2014
ISBN (Electronic)9781479940325
DOIs
Publication statusPublished - 2014 Feb 24

Fingerprint

Copying
Friction
Experiments

ASJC Scopus subject areas

  • Electrical and Electronic Engineering

Cite this

Honjo, R., & Katsura, S. (2014). Reproduction control of rubbing motion taking friction variation into account. In IECON Proceedings (Industrial Electronics Conference) (Vol. 40th Annual Conference of the IEEE Industrial Electronics Society, IECON 2014, pp. 2853-2858). [7048913] Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/IECON.2014.7048913

Reproduction control of rubbing motion taking friction variation into account. / Honjo, Ryutaro; Katsura, Seiichiro.

IECON Proceedings (Industrial Electronics Conference). Vol. 40th Annual Conference of the IEEE Industrial Electronics Society, IECON 2014 Institute of Electrical and Electronics Engineers Inc., 2014. p. 2853-2858 7048913.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Honjo, R & Katsura, S 2014, Reproduction control of rubbing motion taking friction variation into account. in IECON Proceedings (Industrial Electronics Conference). vol. 40th Annual Conference of the IEEE Industrial Electronics Society, IECON 2014, 7048913, Institute of Electrical and Electronics Engineers Inc., pp. 2853-2858. https://doi.org/10.1109/IECON.2014.7048913
Honjo R, Katsura S. Reproduction control of rubbing motion taking friction variation into account. In IECON Proceedings (Industrial Electronics Conference). Vol. 40th Annual Conference of the IEEE Industrial Electronics Society, IECON 2014. Institute of Electrical and Electronics Engineers Inc. 2014. p. 2853-2858. 7048913 https://doi.org/10.1109/IECON.2014.7048913
Honjo, Ryutaro ; Katsura, Seiichiro. / Reproduction control of rubbing motion taking friction variation into account. IECON Proceedings (Industrial Electronics Conference). Vol. 40th Annual Conference of the IEEE Industrial Electronics Society, IECON 2014 Institute of Electrical and Electronics Engineers Inc., 2014. pp. 2853-2858
@inproceedings{7469f926068c4178a90385f7487a13e8,
title = "Reproduction control of rubbing motion taking friction variation into account",
abstract = "This paper proposes a motion-reproduction method for a multi degree-of-freedom system. For extraction and reproduction of haptic information, motion-copying system was previously proposed. However motion-copying system has a drawback; it is difficult to reproduce the saved motion when the environmental configuration in the motion-loading phase is different from that in the motion-saving phase. There are many methods for adapting variation of environmental configuration. However, in conventional methods the orthogonal axial motors are controlled independently. In the tracing motion, there is a friction and interference between orthogonal axes occurs. Thus, it is impossible to reproduce the saved motion when the coefficient of friction is varied. In this paper, amount of the force information is focused and motion-reproduction method which controls synthetic force using two degree-of-freedom system is proposed. The synthetic force is a total magnitude of the force information and it is important to conduct a human motion. To show the validity of the proposed method, experiments were conducted.",
author = "Ryutaro Honjo and Seiichiro Katsura",
year = "2014",
month = "2",
day = "24",
doi = "10.1109/IECON.2014.7048913",
language = "English",
volume = "40th Annual Conference of the IEEE Industrial Electronics Society, IECON 2014",
pages = "2853--2858",
booktitle = "IECON Proceedings (Industrial Electronics Conference)",
publisher = "Institute of Electrical and Electronics Engineers Inc.",

}

TY - GEN

T1 - Reproduction control of rubbing motion taking friction variation into account

AU - Honjo, Ryutaro

AU - Katsura, Seiichiro

PY - 2014/2/24

Y1 - 2014/2/24

N2 - This paper proposes a motion-reproduction method for a multi degree-of-freedom system. For extraction and reproduction of haptic information, motion-copying system was previously proposed. However motion-copying system has a drawback; it is difficult to reproduce the saved motion when the environmental configuration in the motion-loading phase is different from that in the motion-saving phase. There are many methods for adapting variation of environmental configuration. However, in conventional methods the orthogonal axial motors are controlled independently. In the tracing motion, there is a friction and interference between orthogonal axes occurs. Thus, it is impossible to reproduce the saved motion when the coefficient of friction is varied. In this paper, amount of the force information is focused and motion-reproduction method which controls synthetic force using two degree-of-freedom system is proposed. The synthetic force is a total magnitude of the force information and it is important to conduct a human motion. To show the validity of the proposed method, experiments were conducted.

AB - This paper proposes a motion-reproduction method for a multi degree-of-freedom system. For extraction and reproduction of haptic information, motion-copying system was previously proposed. However motion-copying system has a drawback; it is difficult to reproduce the saved motion when the environmental configuration in the motion-loading phase is different from that in the motion-saving phase. There are many methods for adapting variation of environmental configuration. However, in conventional methods the orthogonal axial motors are controlled independently. In the tracing motion, there is a friction and interference between orthogonal axes occurs. Thus, it is impossible to reproduce the saved motion when the coefficient of friction is varied. In this paper, amount of the force information is focused and motion-reproduction method which controls synthetic force using two degree-of-freedom system is proposed. The synthetic force is a total magnitude of the force information and it is important to conduct a human motion. To show the validity of the proposed method, experiments were conducted.

UR - http://www.scopus.com/inward/record.url?scp=84983113159&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84983113159&partnerID=8YFLogxK

U2 - 10.1109/IECON.2014.7048913

DO - 10.1109/IECON.2014.7048913

M3 - Conference contribution

AN - SCOPUS:84983113159

VL - 40th Annual Conference of the IEEE Industrial Electronics Society, IECON 2014

SP - 2853

EP - 2858

BT - IECON Proceedings (Industrial Electronics Conference)

PB - Institute of Electrical and Electronics Engineers Inc.

ER -