Sensing of heat source in a deep layer by considering heat propagation

Yukiko Osawa, Seiichiro Katsura

Research output: Contribution to journalArticle

3 Citations (Scopus)

Abstract

Human sensing and tactile transmission utilizing thermal interface are necessary to support human life or for communicating with people in remote locations. For instance, the devices are used for remote health care, telesurgery, and so on. Many studies have utilized a Peltier device as the thermal interface, and there are many studies on the control and sensing of the device. However, in most of those studies, the heat propagation in the system is not considered, and only the point that is attached to the sensor can be observed and controlled. In particular, this is a problem for health care systems, because it is difficult to obtain information about the inside of the human body where it is hard to attach the sensor. In order to solve this problem, this study considers the heat propagation of materials such as the human body by developing a model based on the thermal diffusion equation. In the case of cooling material, heat propagation changes depending on the material condition, for example, the presence of heat source such as a cancer cell. Based on the thermal characteristics, a method to obtain the heat flow of material using heat propagation is proposed in this paper. It is possible to find a heat source in deep layers of a material by using the proposed method without attaching any sensor inside the material. Some experiments are conducted using aluminum cylinder as a propagation material to verify the validity of the proposed method.

Original languageEnglish
Pages (from-to)229-235
Number of pages7
JournalIEEJ Journal of Industry Applications
Volume7
Issue number3
DOIs
Publication statusPublished - 2018 Jan 1

Fingerprint

Health care
Sensors
Hot Temperature
Thermal diffusion
Cells
Heat transfer
Cooling
Aluminum
Experiments

Keywords

  • Detection
  • Estimation of heat flow
  • Peltier device
  • Thermal diffusion equation
  • Thermoelectric conversion elements

ASJC Scopus subject areas

  • Automotive Engineering
  • Energy Engineering and Power Technology
  • Mechanical Engineering
  • Industrial and Manufacturing Engineering
  • Electrical and Electronic Engineering

Cite this

Sensing of heat source in a deep layer by considering heat propagation. / Osawa, Yukiko; Katsura, Seiichiro.

In: IEEJ Journal of Industry Applications, Vol. 7, No. 3, 01.01.2018, p. 229-235.

Research output: Contribution to journalArticle

@article{ccfb5ed795104a32bde6ace2208228ab,
title = "Sensing of heat source in a deep layer by considering heat propagation",
abstract = "Human sensing and tactile transmission utilizing thermal interface are necessary to support human life or for communicating with people in remote locations. For instance, the devices are used for remote health care, telesurgery, and so on. Many studies have utilized a Peltier device as the thermal interface, and there are many studies on the control and sensing of the device. However, in most of those studies, the heat propagation in the system is not considered, and only the point that is attached to the sensor can be observed and controlled. In particular, this is a problem for health care systems, because it is difficult to obtain information about the inside of the human body where it is hard to attach the sensor. In order to solve this problem, this study considers the heat propagation of materials such as the human body by developing a model based on the thermal diffusion equation. In the case of cooling material, heat propagation changes depending on the material condition, for example, the presence of heat source such as a cancer cell. Based on the thermal characteristics, a method to obtain the heat flow of material using heat propagation is proposed in this paper. It is possible to find a heat source in deep layers of a material by using the proposed method without attaching any sensor inside the material. Some experiments are conducted using aluminum cylinder as a propagation material to verify the validity of the proposed method.",
keywords = "Detection, Estimation of heat flow, Peltier device, Thermal diffusion equation, Thermoelectric conversion elements",
author = "Yukiko Osawa and Seiichiro Katsura",
year = "2018",
month = "1",
day = "1",
doi = "10.1541/ieejjia.7.229",
language = "English",
volume = "7",
pages = "229--235",
journal = "IEEJ Journal of Industry Applications",
issn = "2187-1094",
publisher = "The Institute of Electrical Engineers of Japan",
number = "3",

}

TY - JOUR

T1 - Sensing of heat source in a deep layer by considering heat propagation

AU - Osawa, Yukiko

AU - Katsura, Seiichiro

PY - 2018/1/1

Y1 - 2018/1/1

N2 - Human sensing and tactile transmission utilizing thermal interface are necessary to support human life or for communicating with people in remote locations. For instance, the devices are used for remote health care, telesurgery, and so on. Many studies have utilized a Peltier device as the thermal interface, and there are many studies on the control and sensing of the device. However, in most of those studies, the heat propagation in the system is not considered, and only the point that is attached to the sensor can be observed and controlled. In particular, this is a problem for health care systems, because it is difficult to obtain information about the inside of the human body where it is hard to attach the sensor. In order to solve this problem, this study considers the heat propagation of materials such as the human body by developing a model based on the thermal diffusion equation. In the case of cooling material, heat propagation changes depending on the material condition, for example, the presence of heat source such as a cancer cell. Based on the thermal characteristics, a method to obtain the heat flow of material using heat propagation is proposed in this paper. It is possible to find a heat source in deep layers of a material by using the proposed method without attaching any sensor inside the material. Some experiments are conducted using aluminum cylinder as a propagation material to verify the validity of the proposed method.

AB - Human sensing and tactile transmission utilizing thermal interface are necessary to support human life or for communicating with people in remote locations. For instance, the devices are used for remote health care, telesurgery, and so on. Many studies have utilized a Peltier device as the thermal interface, and there are many studies on the control and sensing of the device. However, in most of those studies, the heat propagation in the system is not considered, and only the point that is attached to the sensor can be observed and controlled. In particular, this is a problem for health care systems, because it is difficult to obtain information about the inside of the human body where it is hard to attach the sensor. In order to solve this problem, this study considers the heat propagation of materials such as the human body by developing a model based on the thermal diffusion equation. In the case of cooling material, heat propagation changes depending on the material condition, for example, the presence of heat source such as a cancer cell. Based on the thermal characteristics, a method to obtain the heat flow of material using heat propagation is proposed in this paper. It is possible to find a heat source in deep layers of a material by using the proposed method without attaching any sensor inside the material. Some experiments are conducted using aluminum cylinder as a propagation material to verify the validity of the proposed method.

KW - Detection

KW - Estimation of heat flow

KW - Peltier device

KW - Thermal diffusion equation

KW - Thermoelectric conversion elements

UR - http://www.scopus.com/inward/record.url?scp=85046254117&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85046254117&partnerID=8YFLogxK

U2 - 10.1541/ieejjia.7.229

DO - 10.1541/ieejjia.7.229

M3 - Article

VL - 7

SP - 229

EP - 235

JO - IEEJ Journal of Industry Applications

JF - IEEJ Journal of Industry Applications

SN - 2187-1094

IS - 3

ER -