Size effects on transferability and mold change of glass molding press for microgrooves

Tianfeng Zhou, Jiwang Yan, Tsunemoto Kuriyagawa

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Abstract

Glass molding press (GMP) was applied to the fabrication of 3 kinds of microgrooves with different pitches on the glass surface. The size effects of microgroove fabrication on the Nickel Phosphorous (Ni-P) plating layer by diamond cutting were experimentally tested, and then, the size effects of microgroove fabrication by GMP using the Ni-P mold were experimentally tested. Finally, the changes of the Ni-P mold after GMP by 100 shots were compared with the microgroove mold before GMP, and the size effects of the mold change were discussed. By the comparison research of microgroove fabrication with different pitches, it suggests a way to create microgrooves with even smaller size.

Original languageEnglish
Title of host publicationAdvanced Materials Research
Pages235-239
Number of pages5
Volume497
DOIs
Publication statusPublished - 2012
Externally publishedYes
Event8th CHINA-JAPAN International Conference on Ultra-Precision Machining, CJUPM 2011 - Hangzhou City, China
Duration: 2011 Nov 202011 Nov 22

Publication series

NameAdvanced Materials Research
Volume497
ISSN (Print)10226680

Other

Other8th CHINA-JAPAN International Conference on Ultra-Precision Machining, CJUPM 2011
CountryChina
CityHangzhou City
Period11/11/2011/11/22

Fingerprint

Molding
Glass
Fabrication
Nickel
Nickel plating
Diamonds

Keywords

  • Glass molding press
  • Micro cutting
  • Micro forming
  • Microgrooves
  • Size effect

ASJC Scopus subject areas

  • Engineering(all)

Cite this

Zhou, T., Yan, J., & Kuriyagawa, T. (2012). Size effects on transferability and mold change of glass molding press for microgrooves. In Advanced Materials Research (Vol. 497, pp. 235-239). (Advanced Materials Research; Vol. 497). https://doi.org/10.4028/www.scientific.net/AMR.497.235

Size effects on transferability and mold change of glass molding press for microgrooves. / Zhou, Tianfeng; Yan, Jiwang; Kuriyagawa, Tsunemoto.

Advanced Materials Research. Vol. 497 2012. p. 235-239 (Advanced Materials Research; Vol. 497).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Zhou, T, Yan, J & Kuriyagawa, T 2012, Size effects on transferability and mold change of glass molding press for microgrooves. in Advanced Materials Research. vol. 497, Advanced Materials Research, vol. 497, pp. 235-239, 8th CHINA-JAPAN International Conference on Ultra-Precision Machining, CJUPM 2011, Hangzhou City, China, 11/11/20. https://doi.org/10.4028/www.scientific.net/AMR.497.235
Zhou T, Yan J, Kuriyagawa T. Size effects on transferability and mold change of glass molding press for microgrooves. In Advanced Materials Research. Vol. 497. 2012. p. 235-239. (Advanced Materials Research). https://doi.org/10.4028/www.scientific.net/AMR.497.235
Zhou, Tianfeng ; Yan, Jiwang ; Kuriyagawa, Tsunemoto. / Size effects on transferability and mold change of glass molding press for microgrooves. Advanced Materials Research. Vol. 497 2012. pp. 235-239 (Advanced Materials Research).
@inproceedings{fed066b4d9cd4bacba8cfd3be800ba77,
title = "Size effects on transferability and mold change of glass molding press for microgrooves",
abstract = "Glass molding press (GMP) was applied to the fabrication of 3 kinds of microgrooves with different pitches on the glass surface. The size effects of microgroove fabrication on the Nickel Phosphorous (Ni-P) plating layer by diamond cutting were experimentally tested, and then, the size effects of microgroove fabrication by GMP using the Ni-P mold were experimentally tested. Finally, the changes of the Ni-P mold after GMP by 100 shots were compared with the microgroove mold before GMP, and the size effects of the mold change were discussed. By the comparison research of microgroove fabrication with different pitches, it suggests a way to create microgrooves with even smaller size.",
keywords = "Glass molding press, Micro cutting, Micro forming, Microgrooves, Size effect",
author = "Tianfeng Zhou and Jiwang Yan and Tsunemoto Kuriyagawa",
year = "2012",
doi = "10.4028/www.scientific.net/AMR.497.235",
language = "English",
isbn = "9783037853962",
volume = "497",
series = "Advanced Materials Research",
pages = "235--239",
booktitle = "Advanced Materials Research",

}

TY - GEN

T1 - Size effects on transferability and mold change of glass molding press for microgrooves

AU - Zhou, Tianfeng

AU - Yan, Jiwang

AU - Kuriyagawa, Tsunemoto

PY - 2012

Y1 - 2012

N2 - Glass molding press (GMP) was applied to the fabrication of 3 kinds of microgrooves with different pitches on the glass surface. The size effects of microgroove fabrication on the Nickel Phosphorous (Ni-P) plating layer by diamond cutting were experimentally tested, and then, the size effects of microgroove fabrication by GMP using the Ni-P mold were experimentally tested. Finally, the changes of the Ni-P mold after GMP by 100 shots were compared with the microgroove mold before GMP, and the size effects of the mold change were discussed. By the comparison research of microgroove fabrication with different pitches, it suggests a way to create microgrooves with even smaller size.

AB - Glass molding press (GMP) was applied to the fabrication of 3 kinds of microgrooves with different pitches on the glass surface. The size effects of microgroove fabrication on the Nickel Phosphorous (Ni-P) plating layer by diamond cutting were experimentally tested, and then, the size effects of microgroove fabrication by GMP using the Ni-P mold were experimentally tested. Finally, the changes of the Ni-P mold after GMP by 100 shots were compared with the microgroove mold before GMP, and the size effects of the mold change were discussed. By the comparison research of microgroove fabrication with different pitches, it suggests a way to create microgrooves with even smaller size.

KW - Glass molding press

KW - Micro cutting

KW - Micro forming

KW - Microgrooves

KW - Size effect

UR - http://www.scopus.com/inward/record.url?scp=84860187674&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84860187674&partnerID=8YFLogxK

U2 - 10.4028/www.scientific.net/AMR.497.235

DO - 10.4028/www.scientific.net/AMR.497.235

M3 - Conference contribution

AN - SCOPUS:84860187674

SN - 9783037853962

VL - 497

T3 - Advanced Materials Research

SP - 235

EP - 239

BT - Advanced Materials Research

ER -