Study of delamination of thin film coating on cyclic nano-indentation test

Kentaro Kozuki, Masaki Omiya, Kikuo Kishimoto, Hirotsugu Inoue

Research output: Contribution to journalArticle

1 Citation (Scopus)

Abstract

The aim of this paper is to evaluate the cyclic interfacial strength between thin film and its substrate by cyclic nano-indentation tests. The specimen used in this study is PET substrate/ITO coatings layered specimen. From the indentation load and displacement curve, we proposed an evaluation method for the interfacial strength. The results are good agreement with the interfacial strength evaluated by peel test. After cyclic indentations, the surface profile was observed by atomic force microscope. The number of elongates increased with indentation cycles when the indentation load is low, whereas elongates number is almost constant under high load cases. These phenomena can be explained by simple models. In this study, two types of fracture modes are proposed. They are "subsidiary fracture mode" and "buckling mode".

Original languageEnglish
Pages (from-to)1842-1845
Number of pages4
JournalKey Engineering Materials
Volume353-358
Issue numberPART 3
Publication statusPublished - 2007
Externally publishedYes

Fingerprint

Nanoindentation
Indentation
Delamination
Thin films
Coatings
Substrates
Buckling
Microscopes

Keywords

  • Cyclic loading
  • Delamination
  • Interface
  • Interfacial strength
  • Nano-indentation
  • Thin film

ASJC Scopus subject areas

  • Ceramics and Composites
  • Chemical Engineering (miscellaneous)

Cite this

Kozuki, K., Omiya, M., Kishimoto, K., & Inoue, H. (2007). Study of delamination of thin film coating on cyclic nano-indentation test. Key Engineering Materials, 353-358(PART 3), 1842-1845.

Study of delamination of thin film coating on cyclic nano-indentation test. / Kozuki, Kentaro; Omiya, Masaki; Kishimoto, Kikuo; Inoue, Hirotsugu.

In: Key Engineering Materials, Vol. 353-358, No. PART 3, 2007, p. 1842-1845.

Research output: Contribution to journalArticle

Kozuki, K, Omiya, M, Kishimoto, K & Inoue, H 2007, 'Study of delamination of thin film coating on cyclic nano-indentation test', Key Engineering Materials, vol. 353-358, no. PART 3, pp. 1842-1845.
Kozuki, Kentaro ; Omiya, Masaki ; Kishimoto, Kikuo ; Inoue, Hirotsugu. / Study of delamination of thin film coating on cyclic nano-indentation test. In: Key Engineering Materials. 2007 ; Vol. 353-358, No. PART 3. pp. 1842-1845.
@article{c682d0493e2141f4bed9b314010e1a8e,
title = "Study of delamination of thin film coating on cyclic nano-indentation test",
abstract = "The aim of this paper is to evaluate the cyclic interfacial strength between thin film and its substrate by cyclic nano-indentation tests. The specimen used in this study is PET substrate/ITO coatings layered specimen. From the indentation load and displacement curve, we proposed an evaluation method for the interfacial strength. The results are good agreement with the interfacial strength evaluated by peel test. After cyclic indentations, the surface profile was observed by atomic force microscope. The number of elongates increased with indentation cycles when the indentation load is low, whereas elongates number is almost constant under high load cases. These phenomena can be explained by simple models. In this study, two types of fracture modes are proposed. They are {"}subsidiary fracture mode{"} and {"}buckling mode{"}.",
keywords = "Cyclic loading, Delamination, Interface, Interfacial strength, Nano-indentation, Thin film",
author = "Kentaro Kozuki and Masaki Omiya and Kikuo Kishimoto and Hirotsugu Inoue",
year = "2007",
language = "English",
volume = "353-358",
pages = "1842--1845",
journal = "Key Engineering Materials",
issn = "1013-9826",
publisher = "Trans Tech Publications",
number = "PART 3",

}

TY - JOUR

T1 - Study of delamination of thin film coating on cyclic nano-indentation test

AU - Kozuki, Kentaro

AU - Omiya, Masaki

AU - Kishimoto, Kikuo

AU - Inoue, Hirotsugu

PY - 2007

Y1 - 2007

N2 - The aim of this paper is to evaluate the cyclic interfacial strength between thin film and its substrate by cyclic nano-indentation tests. The specimen used in this study is PET substrate/ITO coatings layered specimen. From the indentation load and displacement curve, we proposed an evaluation method for the interfacial strength. The results are good agreement with the interfacial strength evaluated by peel test. After cyclic indentations, the surface profile was observed by atomic force microscope. The number of elongates increased with indentation cycles when the indentation load is low, whereas elongates number is almost constant under high load cases. These phenomena can be explained by simple models. In this study, two types of fracture modes are proposed. They are "subsidiary fracture mode" and "buckling mode".

AB - The aim of this paper is to evaluate the cyclic interfacial strength between thin film and its substrate by cyclic nano-indentation tests. The specimen used in this study is PET substrate/ITO coatings layered specimen. From the indentation load and displacement curve, we proposed an evaluation method for the interfacial strength. The results are good agreement with the interfacial strength evaluated by peel test. After cyclic indentations, the surface profile was observed by atomic force microscope. The number of elongates increased with indentation cycles when the indentation load is low, whereas elongates number is almost constant under high load cases. These phenomena can be explained by simple models. In this study, two types of fracture modes are proposed. They are "subsidiary fracture mode" and "buckling mode".

KW - Cyclic loading

KW - Delamination

KW - Interface

KW - Interfacial strength

KW - Nano-indentation

KW - Thin film

UR - http://www.scopus.com/inward/record.url?scp=36049013073&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=36049013073&partnerID=8YFLogxK

M3 - Article

AN - SCOPUS:36049013073

VL - 353-358

SP - 1842

EP - 1845

JO - Key Engineering Materials

JF - Key Engineering Materials

SN - 1013-9826

IS - PART 3

ER -