STUDY ON A THROW AWAY TOOL EQUIPPED WIH A SENSOR TO DETECT FLANK WEAR.

Hideki Aoyama, Takeshi Kishinami, Katsumasa Saito

Research output: Contribution to journalArticle

1 Citation (Scopus)

Abstract

A cutting tool equipped with a sensor to detect flank wear and tool failure was developed. The sensor is a resistance film circuit formed from titanium on the flanks of a throw away alumina tip. The sensor is located in a position parallel with the cutting edge. The means of detecting wear of the tool is by measuring electical resistance. The electrical resistance of the sensor gradually increases as the resistance film circuit is worn off by flank wear and the circuit becomes narrower.

Original languageEnglish
Pages (from-to)203-208
Number of pages6
JournalBulletin of the Japan Society of Precision Engineering
Volume21
Issue number3
Publication statusPublished - 1987 Sep
Externally publishedYes

Fingerprint

Wear of materials
Sensors
Networks (circuits)
Acoustic impedance
Cutting tools
Alumina
Titanium

ASJC Scopus subject areas

  • Engineering(all)

Cite this

STUDY ON A THROW AWAY TOOL EQUIPPED WIH A SENSOR TO DETECT FLANK WEAR. / Aoyama, Hideki; Kishinami, Takeshi; Saito, Katsumasa.

In: Bulletin of the Japan Society of Precision Engineering, Vol. 21, No. 3, 09.1987, p. 203-208.

Research output: Contribution to journalArticle

@article{1229219fcb244939b0a89675e04bfba0,
title = "STUDY ON A THROW AWAY TOOL EQUIPPED WIH A SENSOR TO DETECT FLANK WEAR.",
abstract = "A cutting tool equipped with a sensor to detect flank wear and tool failure was developed. The sensor is a resistance film circuit formed from titanium on the flanks of a throw away alumina tip. The sensor is located in a position parallel with the cutting edge. The means of detecting wear of the tool is by measuring electical resistance. The electrical resistance of the sensor gradually increases as the resistance film circuit is worn off by flank wear and the circuit becomes narrower.",
author = "Hideki Aoyama and Takeshi Kishinami and Katsumasa Saito",
year = "1987",
month = "9",
language = "English",
volume = "21",
pages = "203--208",
journal = "Bulletin of the Japan Society of Precision Engineering",
issn = "0582-4206",
publisher = "Japan Society for Precision Engineering",
number = "3",

}

TY - JOUR

T1 - STUDY ON A THROW AWAY TOOL EQUIPPED WIH A SENSOR TO DETECT FLANK WEAR.

AU - Aoyama, Hideki

AU - Kishinami, Takeshi

AU - Saito, Katsumasa

PY - 1987/9

Y1 - 1987/9

N2 - A cutting tool equipped with a sensor to detect flank wear and tool failure was developed. The sensor is a resistance film circuit formed from titanium on the flanks of a throw away alumina tip. The sensor is located in a position parallel with the cutting edge. The means of detecting wear of the tool is by measuring electical resistance. The electrical resistance of the sensor gradually increases as the resistance film circuit is worn off by flank wear and the circuit becomes narrower.

AB - A cutting tool equipped with a sensor to detect flank wear and tool failure was developed. The sensor is a resistance film circuit formed from titanium on the flanks of a throw away alumina tip. The sensor is located in a position parallel with the cutting edge. The means of detecting wear of the tool is by measuring electical resistance. The electrical resistance of the sensor gradually increases as the resistance film circuit is worn off by flank wear and the circuit becomes narrower.

UR - http://www.scopus.com/inward/record.url?scp=0023418507&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0023418507&partnerID=8YFLogxK

M3 - Article

VL - 21

SP - 203

EP - 208

JO - Bulletin of the Japan Society of Precision Engineering

JF - Bulletin of the Japan Society of Precision Engineering

SN - 0582-4206

IS - 3

ER -