Study on nonisothermal glass molding press for aspherical lens

Tianfeng Zhou, Jiwang Yan, Nobuhiro Yoshihara, Tsunemoto Kuriyagawa

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

Nonisothermal glass molding press (NGMP) was proposed to fabricate aspherical lenses, and its characteristics were studied by both experiments and finite element method (FEM) simulation in comparison with the traditional isothermal glass molding press (IGMP). The cycle time, form accuracy, surface roughness, stress/strain distributions of the aspherical lenses made by IGMP and NGMP were examined and compared. Experimental results and simulation results show that NGMP is an effective way to improve the molding efficiency and prolong the service life of the molding dies.

Original languageEnglish
Title of host publicationProceedings of the 5th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2009
Publication statusPublished - 2009
Externally publishedYes
Event5th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2009 - Osaka, Japan
Duration: 2009 Dec 22009 Dec 4

Other

Other5th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2009
CountryJapan
CityOsaka
Period09/12/209/12/4

Fingerprint

Molding
Lenses
Glass
Service life
Surface roughness
Finite element method
Experiments

Keywords

  • Aspherical lens
  • Finite element method
  • Glass molding press
  • Nonisothermal forming

ASJC Scopus subject areas

  • Industrial and Manufacturing Engineering

Cite this

Zhou, T., Yan, J., Yoshihara, N., & Kuriyagawa, T. (2009). Study on nonisothermal glass molding press for aspherical lens. In Proceedings of the 5th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2009

Study on nonisothermal glass molding press for aspherical lens. / Zhou, Tianfeng; Yan, Jiwang; Yoshihara, Nobuhiro; Kuriyagawa, Tsunemoto.

Proceedings of the 5th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2009. 2009.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Zhou, T, Yan, J, Yoshihara, N & Kuriyagawa, T 2009, Study on nonisothermal glass molding press for aspherical lens. in Proceedings of the 5th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2009. 5th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2009, Osaka, Japan, 09/12/2.
Zhou T, Yan J, Yoshihara N, Kuriyagawa T. Study on nonisothermal glass molding press for aspherical lens. In Proceedings of the 5th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2009. 2009
Zhou, Tianfeng ; Yan, Jiwang ; Yoshihara, Nobuhiro ; Kuriyagawa, Tsunemoto. / Study on nonisothermal glass molding press for aspherical lens. Proceedings of the 5th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2009. 2009.
@inproceedings{eef3c2e364ab4a568c57bd827f540fa4,
title = "Study on nonisothermal glass molding press for aspherical lens",
abstract = "Nonisothermal glass molding press (NGMP) was proposed to fabricate aspherical lenses, and its characteristics were studied by both experiments and finite element method (FEM) simulation in comparison with the traditional isothermal glass molding press (IGMP). The cycle time, form accuracy, surface roughness, stress/strain distributions of the aspherical lenses made by IGMP and NGMP were examined and compared. Experimental results and simulation results show that NGMP is an effective way to improve the molding efficiency and prolong the service life of the molding dies.",
keywords = "Aspherical lens, Finite element method, Glass molding press, Nonisothermal forming",
author = "Tianfeng Zhou and Jiwang Yan and Nobuhiro Yoshihara and Tsunemoto Kuriyagawa",
year = "2009",
language = "English",
booktitle = "Proceedings of the 5th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2009",

}

TY - GEN

T1 - Study on nonisothermal glass molding press for aspherical lens

AU - Zhou, Tianfeng

AU - Yan, Jiwang

AU - Yoshihara, Nobuhiro

AU - Kuriyagawa, Tsunemoto

PY - 2009

Y1 - 2009

N2 - Nonisothermal glass molding press (NGMP) was proposed to fabricate aspherical lenses, and its characteristics were studied by both experiments and finite element method (FEM) simulation in comparison with the traditional isothermal glass molding press (IGMP). The cycle time, form accuracy, surface roughness, stress/strain distributions of the aspherical lenses made by IGMP and NGMP were examined and compared. Experimental results and simulation results show that NGMP is an effective way to improve the molding efficiency and prolong the service life of the molding dies.

AB - Nonisothermal glass molding press (NGMP) was proposed to fabricate aspherical lenses, and its characteristics were studied by both experiments and finite element method (FEM) simulation in comparison with the traditional isothermal glass molding press (IGMP). The cycle time, form accuracy, surface roughness, stress/strain distributions of the aspherical lenses made by IGMP and NGMP were examined and compared. Experimental results and simulation results show that NGMP is an effective way to improve the molding efficiency and prolong the service life of the molding dies.

KW - Aspherical lens

KW - Finite element method

KW - Glass molding press

KW - Nonisothermal forming

UR - http://www.scopus.com/inward/record.url?scp=84883427130&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84883427130&partnerID=8YFLogxK

M3 - Conference contribution

AN - SCOPUS:84883427130

BT - Proceedings of the 5th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2009

ER -