Surface integrity of fluid jet polished tungsten carbide

Anthony Beaucamp; Yoshiharu Namba; Wilhelmus Messelink; David Walker; Phillip Charlton; Richard Freeman

doi:10.1016/j.procir.2014.04.064

Surface integrity of fluid jet polished tungsten carbide

Anthony Beaucamp, Yoshiharu Namba, Wilhelmus Messelink, David Walker, Phillip Charlton, Richard Freeman

Research output: Contribution to journal › Conference article › peer-review

Abstract

In recent years, Fluid Jet Polishing (FJP) has been studied for its potential as a finishing method on optical lenses, mirrors and molds for a number of materials, such a glass and nickel. In this paper, the surface integrity of binderless tungsten carbide after polishing by FJP was studied experimentally. Two aspects in particular were focused on: (1) identifying process conditions under which grain boundaries may dislocate (thus leading to unintentional loss of grains from the substrate) and (2) identify process conditions under which abrasive particles may become embedded into the substrate, in order to prevent surface contamination.

Original language	English
Pages (from-to)	377-381
Number of pages	5
Journal	Procedia CIRP
Volume	13
DOIs	https://doi.org/10.1016/j.procir.2014.04.064
Publication status	Published - 2014
Externally published	Yes
Event	2nd CIRP Conference on Surface Integrity, CSI 2014 - Nottingham, United Kingdom Duration: 2014 May 28 → 2014 May 30

Keywords

Carbide
Fluid jet polishing
Surface integrity

ASJC Scopus subject areas

Control and Systems Engineering
Industrial and Manufacturing Engineering

Access to Document

10.1016/j.procir.2014.04.064

Cite this

@article{803d77455761488dba2b75d571f78e0c,

title = "Surface integrity of fluid jet polished tungsten carbide",

abstract = "In recent years, Fluid Jet Polishing (FJP) has been studied for its potential as a finishing method on optical lenses, mirrors and molds for a number of materials, such a glass and nickel. In this paper, the surface integrity of binderless tungsten carbide after polishing by FJP was studied experimentally. Two aspects in particular were focused on: (1) identifying process conditions under which grain boundaries may dislocate (thus leading to unintentional loss of grains from the substrate) and (2) identify process conditions under which abrasive particles may become embedded into the substrate, in order to prevent surface contamination.",

keywords = "Carbide, Fluid jet polishing, Surface integrity",

author = "Anthony Beaucamp and Yoshiharu Namba and Wilhelmus Messelink and David Walker and Phillip Charlton and Richard Freeman",

note = "Funding Information: This work was supported by JSPS Grant-in-Aid for Scientific Research (B) No. 22360063, from the Japan Society for the Promotion of Science.; 2nd CIRP Conference on Surface Integrity, CSI 2014 ; Conference date: 28-05-2014 Through 30-05-2014",

year = "2014",

doi = "10.1016/j.procir.2014.04.064",

language = "English",

volume = "13",

pages = "377--381",

journal = "Procedia CIRP",

issn = "2212-8271",

publisher = "Elsevier BV",

}

TY - JOUR

T1 - Surface integrity of fluid jet polished tungsten carbide

AU - Beaucamp, Anthony

AU - Namba, Yoshiharu

AU - Messelink, Wilhelmus

AU - Walker, David

AU - Charlton, Phillip

AU - Freeman, Richard

N1 - Funding Information: This work was supported by JSPS Grant-in-Aid for Scientific Research (B) No. 22360063, from the Japan Society for the Promotion of Science.

PY - 2014

Y1 - 2014

N2 - In recent years, Fluid Jet Polishing (FJP) has been studied for its potential as a finishing method on optical lenses, mirrors and molds for a number of materials, such a glass and nickel. In this paper, the surface integrity of binderless tungsten carbide after polishing by FJP was studied experimentally. Two aspects in particular were focused on: (1) identifying process conditions under which grain boundaries may dislocate (thus leading to unintentional loss of grains from the substrate) and (2) identify process conditions under which abrasive particles may become embedded into the substrate, in order to prevent surface contamination.

AB - In recent years, Fluid Jet Polishing (FJP) has been studied for its potential as a finishing method on optical lenses, mirrors and molds for a number of materials, such a glass and nickel. In this paper, the surface integrity of binderless tungsten carbide after polishing by FJP was studied experimentally. Two aspects in particular were focused on: (1) identifying process conditions under which grain boundaries may dislocate (thus leading to unintentional loss of grains from the substrate) and (2) identify process conditions under which abrasive particles may become embedded into the substrate, in order to prevent surface contamination.

KW - Carbide

KW - Fluid jet polishing

KW - Surface integrity

UR - http://www.scopus.com/inward/record.url?scp=84901746397&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84901746397&partnerID=8YFLogxK

U2 - 10.1016/j.procir.2014.04.064

DO - 10.1016/j.procir.2014.04.064

M3 - Conference article

AN - SCOPUS:84901746397

SN - 2212-8271

VL - 13

SP - 377

EP - 381

JO - Procedia CIRP

JF - Procedia CIRP

T2 - 2nd CIRP Conference on Surface Integrity, CSI 2014

Y2 - 28 May 2014 through 30 May 2014

ER -

Surface integrity of fluid jet polished tungsten carbide

Abstract

Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this