System identification and model predictive control design of toner supply system of photocopier

Shoko Nagai; Hideo Muroi; Yu Takeshita; Makoto Komatsu; Shinji Kato; Shuichi Adachi

doi:10.1109/CCA.2015.7320773

System identification and model predictive control design of toner supply system of photocopier

Shoko Nagai, Hideo Muroi, Yu Takeshita, Makoto Komatsu, Shinji Kato, Shuichi Adachi

Department of Applied Physics and Physico-Informatics

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Abstract

This paper deals with modeling and control systems design of a toner supply system of photocopiers. It is important to keep an image of the photocopier constant during printing. To realize the requirement, it is necessary to control the amount of the toner attracting to the paper. This paper proposes a design method of the toner supply control system. First, the printing process is divided to two components, that is, the toner supply system and development system. System identification method is applied to these systems in consideration of physical characteristics of the systems. Second, the toner supply control system is designed by model predictive control (MPC). Finally, the effectiveness of the proposed method is examined by using the experimental data using a photocopier.

Original language	English
Title of host publication	2015 IEEE Conference on Control and Applications, CCA 2015 - Proceedings
Publisher	Institute of Electrical and Electronics Engineers Inc.
Pages	1185-1190
Number of pages	6
ISBN (Print)	9781479977871
DOIs	https://doi.org/10.1109/CCA.2015.7320773
Publication status	Published - 2015 Nov 4
Event	IEEE Conference on Control and Applications, CCA 2015 - Sydney, Australia Duration: 2015 Sept 21 → 2015 Sept 23

Other

Other	IEEE Conference on Control and Applications, CCA 2015
Country/Territory	Australia
City	Sydney
Period	15/9/21 → 15/9/23

ASJC Scopus subject areas

Control and Systems Engineering

Access to Document

10.1109/CCA.2015.7320773

Cite this

Nagai, S., Muroi, H., Takeshita, Y., Komatsu, M., Kato, S., & Adachi, S. (2015). System identification and model predictive control design of toner supply system of photocopier. In 2015 IEEE Conference on Control and Applications, CCA 2015 - Proceedings (pp. 1185-1190). [7320773] Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/CCA.2015.7320773

System identification and model predictive control design of toner supply system of photocopier. / Nagai, Shoko; Muroi, Hideo; Takeshita, Yu et al.

2015 IEEE Conference on Control and Applications, CCA 2015 - Proceedings. Institute of Electrical and Electronics Engineers Inc., 2015. p. 1185-1190 7320773.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Nagai, S, Muroi, H, Takeshita, Y, Komatsu, M, Kato, S & Adachi, S 2015, System identification and model predictive control design of toner supply system of photocopier. in 2015 IEEE Conference on Control and Applications, CCA 2015 - Proceedings., 7320773, Institute of Electrical and Electronics Engineers Inc., pp. 1185-1190, IEEE Conference on Control and Applications, CCA 2015, Sydney, Australia, 15/9/21. https://doi.org/10.1109/CCA.2015.7320773

@inproceedings{ad8547d6ad824c7292a234a2db62654b,

title = "System identification and model predictive control design of toner supply system of photocopier",

abstract = "This paper deals with modeling and control systems design of a toner supply system of photocopiers. It is important to keep an image of the photocopier constant during printing. To realize the requirement, it is necessary to control the amount of the toner attracting to the paper. This paper proposes a design method of the toner supply control system. First, the printing process is divided to two components, that is, the toner supply system and development system. System identification method is applied to these systems in consideration of physical characteristics of the systems. Second, the toner supply control system is designed by model predictive control (MPC). Finally, the effectiveness of the proposed method is examined by using the experimental data using a photocopier.",

author = "Shoko Nagai and Hideo Muroi and Yu Takeshita and Makoto Komatsu and Shinji Kato and Shuichi Adachi",

year = "2015",

month = nov,

day = "4",

doi = "10.1109/CCA.2015.7320773",

language = "English",

isbn = "9781479977871",

pages = "1185--1190",

booktitle = "2015 IEEE Conference on Control and Applications, CCA 2015 - Proceedings",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

note = "IEEE Conference on Control and Applications, CCA 2015 ; Conference date: 21-09-2015 Through 23-09-2015",

}

TY - GEN

T1 - System identification and model predictive control design of toner supply system of photocopier

AU - Nagai, Shoko

AU - Muroi, Hideo

AU - Takeshita, Yu

AU - Komatsu, Makoto

AU - Kato, Shinji

AU - Adachi, Shuichi

PY - 2015/11/4

Y1 - 2015/11/4

N2 - This paper deals with modeling and control systems design of a toner supply system of photocopiers. It is important to keep an image of the photocopier constant during printing. To realize the requirement, it is necessary to control the amount of the toner attracting to the paper. This paper proposes a design method of the toner supply control system. First, the printing process is divided to two components, that is, the toner supply system and development system. System identification method is applied to these systems in consideration of physical characteristics of the systems. Second, the toner supply control system is designed by model predictive control (MPC). Finally, the effectiveness of the proposed method is examined by using the experimental data using a photocopier.

AB - This paper deals with modeling and control systems design of a toner supply system of photocopiers. It is important to keep an image of the photocopier constant during printing. To realize the requirement, it is necessary to control the amount of the toner attracting to the paper. This paper proposes a design method of the toner supply control system. First, the printing process is divided to two components, that is, the toner supply system and development system. System identification method is applied to these systems in consideration of physical characteristics of the systems. Second, the toner supply control system is designed by model predictive control (MPC). Finally, the effectiveness of the proposed method is examined by using the experimental data using a photocopier.

UR - http://www.scopus.com/inward/record.url?scp=84964319812&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84964319812&partnerID=8YFLogxK

U2 - 10.1109/CCA.2015.7320773

DO - 10.1109/CCA.2015.7320773

M3 - Conference contribution

AN - SCOPUS:84964319812

SN - 9781479977871

SP - 1185

EP - 1190

BT - 2015 IEEE Conference on Control and Applications, CCA 2015 - Proceedings

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - IEEE Conference on Control and Applications, CCA 2015

Y2 - 21 September 2015 through 23 September 2015

ER -

System identification and model predictive control design of toner supply system of photocopier

Abstract

Other

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this