Temperature measurement of Ho: YAG laser induced bubble in water using silver halide IR optical fiber

Takehiro Iwasaki, Eriko Nakatani, Tsunenori Arai

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

We measured the localized transient temperature of Ho:YAG laser induced bubble in water by infrared radiation measurement with a infrared optical fiber to study heat effect/damage of this bubble for vascular therapeutic applications. Although there have been many reports regarding to the temperature in the Ho:YAG laser induced bubble by both theoretical and experimental approaches, we can not find well-time-response reliable temperature in the laser induced bubble. We constructed the remote temperature measurement system to obtain the temperature of the laser induced bubble with the infrared optical fiber (Optran MIR, CeramOptec) made of AgCl/AgBr with 1mm in core diameter. The flash lamp excited Ho: YAG laser (IH102, NIIC,λ=2.1μm) beam was delivered through a silica optical fiber (core diameter: 600μm) and was irradiated from the fiber tip in water. The tip position of the infrared optical fiber against the silica glass fiber was changed to measure local bubble temperature. The sidewall of the infrared optical fiber tip was covered by a black rubber tube to prevent the collection of the Ho:YAG laser into the infrared fiber. The infrared radiation delivered through the infrared optical fiber was measured by the HgCdTe infrared detector (KMPC12-2-J1, Kolmar Technologies, rise time:500ns). This fiber optic radiation detection system was calibrated before the bubble temperature measurement. Since the bubble boundary location and its shape were changed with time, we corrected influences of these factors. We finally obtained the peak temperature of 61.7±2.8°C at the top surface in the laser induced bubble with 800mJ/pulse. This temperature was 10 degree lower than that of reported. The temperature at the top of the bubble was approximately 9.8 degree higher than that at the bubble side. Obtained temperature distribution with time may be available to study bubble dynamics necessary for our vascular applications.

Original languageEnglish
Title of host publicationProgress in Biomedical Optics and Imaging - Proceedings of SPIE
Volume6852
DOIs
Publication statusPublished - 2008
EventOptical Fibers and Sensors for Medical Diagnostics and Treatment Applications VIII - San Jose, CA, United States
Duration: 2008 Jan 192008 Jan 21

Other

OtherOptical Fibers and Sensors for Medical Diagnostics and Treatment Applications VIII
CountryUnited States
CitySan Jose, CA
Period08/1/1908/1/21

Fingerprint

Silver halides
Temperature measurement
Optical fibers
Infrared radiation
Lasers
Water
Temperature
Infrared detectors
Fibers
Fused silica
Electric lamps
Glass fibers
Thermal effects
Fiber optics
Laser pulses
Rubber
Temperature distribution
Silica
Radiation

Keywords

  • Ho: YAG laser
  • Infrared optical fiber
  • Infrared radiation thermometer
  • Laser induced bubble

ASJC Scopus subject areas

  • Engineering(all)

Cite this

Iwasaki, T., Nakatani, E., & Arai, T. (2008). Temperature measurement of Ho: YAG laser induced bubble in water using silver halide IR optical fiber. In Progress in Biomedical Optics and Imaging - Proceedings of SPIE (Vol. 6852). [68520R] https://doi.org/10.1117/12.767108

Temperature measurement of Ho : YAG laser induced bubble in water using silver halide IR optical fiber. / Iwasaki, Takehiro; Nakatani, Eriko; Arai, Tsunenori.

Progress in Biomedical Optics and Imaging - Proceedings of SPIE. Vol. 6852 2008. 68520R.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Iwasaki, T, Nakatani, E & Arai, T 2008, Temperature measurement of Ho: YAG laser induced bubble in water using silver halide IR optical fiber. in Progress in Biomedical Optics and Imaging - Proceedings of SPIE. vol. 6852, 68520R, Optical Fibers and Sensors for Medical Diagnostics and Treatment Applications VIII, San Jose, CA, United States, 08/1/19. https://doi.org/10.1117/12.767108
Iwasaki T, Nakatani E, Arai T. Temperature measurement of Ho: YAG laser induced bubble in water using silver halide IR optical fiber. In Progress in Biomedical Optics and Imaging - Proceedings of SPIE. Vol. 6852. 2008. 68520R https://doi.org/10.1117/12.767108
Iwasaki, Takehiro ; Nakatani, Eriko ; Arai, Tsunenori. / Temperature measurement of Ho : YAG laser induced bubble in water using silver halide IR optical fiber. Progress in Biomedical Optics and Imaging - Proceedings of SPIE. Vol. 6852 2008.
@inproceedings{a602f4e3a13640bdbfd68e4873c11cf5,
title = "Temperature measurement of Ho: YAG laser induced bubble in water using silver halide IR optical fiber",
abstract = "We measured the localized transient temperature of Ho:YAG laser induced bubble in water by infrared radiation measurement with a infrared optical fiber to study heat effect/damage of this bubble for vascular therapeutic applications. Although there have been many reports regarding to the temperature in the Ho:YAG laser induced bubble by both theoretical and experimental approaches, we can not find well-time-response reliable temperature in the laser induced bubble. We constructed the remote temperature measurement system to obtain the temperature of the laser induced bubble with the infrared optical fiber (Optran MIR, CeramOptec) made of AgCl/AgBr with 1mm in core diameter. The flash lamp excited Ho: YAG laser (IH102, NIIC,λ=2.1μm) beam was delivered through a silica optical fiber (core diameter: 600μm) and was irradiated from the fiber tip in water. The tip position of the infrared optical fiber against the silica glass fiber was changed to measure local bubble temperature. The sidewall of the infrared optical fiber tip was covered by a black rubber tube to prevent the collection of the Ho:YAG laser into the infrared fiber. The infrared radiation delivered through the infrared optical fiber was measured by the HgCdTe infrared detector (KMPC12-2-J1, Kolmar Technologies, rise time:500ns). This fiber optic radiation detection system was calibrated before the bubble temperature measurement. Since the bubble boundary location and its shape were changed with time, we corrected influences of these factors. We finally obtained the peak temperature of 61.7±2.8°C at the top surface in the laser induced bubble with 800mJ/pulse. This temperature was 10 degree lower than that of reported. The temperature at the top of the bubble was approximately 9.8 degree higher than that at the bubble side. Obtained temperature distribution with time may be available to study bubble dynamics necessary for our vascular applications.",
keywords = "Ho: YAG laser, Infrared optical fiber, Infrared radiation thermometer, Laser induced bubble",
author = "Takehiro Iwasaki and Eriko Nakatani and Tsunenori Arai",
year = "2008",
doi = "10.1117/12.767108",
language = "English",
isbn = "9780819470270",
volume = "6852",
booktitle = "Progress in Biomedical Optics and Imaging - Proceedings of SPIE",

}

TY - GEN

T1 - Temperature measurement of Ho

T2 - YAG laser induced bubble in water using silver halide IR optical fiber

AU - Iwasaki, Takehiro

AU - Nakatani, Eriko

AU - Arai, Tsunenori

PY - 2008

Y1 - 2008

N2 - We measured the localized transient temperature of Ho:YAG laser induced bubble in water by infrared radiation measurement with a infrared optical fiber to study heat effect/damage of this bubble for vascular therapeutic applications. Although there have been many reports regarding to the temperature in the Ho:YAG laser induced bubble by both theoretical and experimental approaches, we can not find well-time-response reliable temperature in the laser induced bubble. We constructed the remote temperature measurement system to obtain the temperature of the laser induced bubble with the infrared optical fiber (Optran MIR, CeramOptec) made of AgCl/AgBr with 1mm in core diameter. The flash lamp excited Ho: YAG laser (IH102, NIIC,λ=2.1μm) beam was delivered through a silica optical fiber (core diameter: 600μm) and was irradiated from the fiber tip in water. The tip position of the infrared optical fiber against the silica glass fiber was changed to measure local bubble temperature. The sidewall of the infrared optical fiber tip was covered by a black rubber tube to prevent the collection of the Ho:YAG laser into the infrared fiber. The infrared radiation delivered through the infrared optical fiber was measured by the HgCdTe infrared detector (KMPC12-2-J1, Kolmar Technologies, rise time:500ns). This fiber optic radiation detection system was calibrated before the bubble temperature measurement. Since the bubble boundary location and its shape were changed with time, we corrected influences of these factors. We finally obtained the peak temperature of 61.7±2.8°C at the top surface in the laser induced bubble with 800mJ/pulse. This temperature was 10 degree lower than that of reported. The temperature at the top of the bubble was approximately 9.8 degree higher than that at the bubble side. Obtained temperature distribution with time may be available to study bubble dynamics necessary for our vascular applications.

AB - We measured the localized transient temperature of Ho:YAG laser induced bubble in water by infrared radiation measurement with a infrared optical fiber to study heat effect/damage of this bubble for vascular therapeutic applications. Although there have been many reports regarding to the temperature in the Ho:YAG laser induced bubble by both theoretical and experimental approaches, we can not find well-time-response reliable temperature in the laser induced bubble. We constructed the remote temperature measurement system to obtain the temperature of the laser induced bubble with the infrared optical fiber (Optran MIR, CeramOptec) made of AgCl/AgBr with 1mm in core diameter. The flash lamp excited Ho: YAG laser (IH102, NIIC,λ=2.1μm) beam was delivered through a silica optical fiber (core diameter: 600μm) and was irradiated from the fiber tip in water. The tip position of the infrared optical fiber against the silica glass fiber was changed to measure local bubble temperature. The sidewall of the infrared optical fiber tip was covered by a black rubber tube to prevent the collection of the Ho:YAG laser into the infrared fiber. The infrared radiation delivered through the infrared optical fiber was measured by the HgCdTe infrared detector (KMPC12-2-J1, Kolmar Technologies, rise time:500ns). This fiber optic radiation detection system was calibrated before the bubble temperature measurement. Since the bubble boundary location and its shape were changed with time, we corrected influences of these factors. We finally obtained the peak temperature of 61.7±2.8°C at the top surface in the laser induced bubble with 800mJ/pulse. This temperature was 10 degree lower than that of reported. The temperature at the top of the bubble was approximately 9.8 degree higher than that at the bubble side. Obtained temperature distribution with time may be available to study bubble dynamics necessary for our vascular applications.

KW - Ho: YAG laser

KW - Infrared optical fiber

KW - Infrared radiation thermometer

KW - Laser induced bubble

UR - http://www.scopus.com/inward/record.url?scp=42149127155&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=42149127155&partnerID=8YFLogxK

U2 - 10.1117/12.767108

DO - 10.1117/12.767108

M3 - Conference contribution

AN - SCOPUS:42149127155

SN - 9780819470270

VL - 6852

BT - Progress in Biomedical Optics and Imaging - Proceedings of SPIE

ER -