The effect of fusing time on fatigue properties of thermally sprayed steel with Ni-based self-fluxing alloy

Hiroyuki Akebono, Ryohei Ito, Masahiro Fukumoto, Jun Komotori, Masao Shimizu

Research output: Contribution to journalArticle

3 Citations (Scopus)

Abstract

To investigate the effects of fusing conditions on the microstructures and on fatigue properties of thermally sprayed coating, three types of thermally sprayed specimen with different heating periods in the fusing process were prepared. Rotational bending fatigue tests and characterization of coating microstructures were carried out. By using a vacuum furnace for fusing, it is possible to get sprayed coating with very little porosity and high mechanical properties. Heating time in the fusing process strongly affects the fatigue properties; the longer the heating time, the lower the fatigue strength. This is because longer heating process induces a segregation of the chromium compound in the coated microstructures. In orier to achieve higher fatigue strength, shorter length fusing was performed by an induction heating system. However, the fatigue strength of the specimen is much lower than that of the vacuum furnace fused specimen. This is because a delamination between the coating layer and the substrate occurred during the fatigue process and the fatigue crack started at the newly created surfaces at the substrates.

Original languageEnglish
Pages (from-to)843-849
Number of pages7
JournalNippon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A
Volume70
Issue number6
Publication statusPublished - 2004 Jun
Externally publishedYes

Fingerprint

Steel
Fatigue of materials
Vacuum furnaces
Sprayed coatings
Heating
Microstructure
Chromium Compounds
Chromium compounds
Coatings
Induction heating
Industrial heating
Substrates
Delamination
Porosity
Mechanical properties
Fatigue strength

Keywords

  • Fatigue
  • Fracture Mechanism
  • Fusing Time
  • Ni-Based Self-Fluxing Alloy
  • Segregation

ASJC Scopus subject areas

  • Mechanical Engineering

Cite this

The effect of fusing time on fatigue properties of thermally sprayed steel with Ni-based self-fluxing alloy. / Akebono, Hiroyuki; Ito, Ryohei; Fukumoto, Masahiro; Komotori, Jun; Shimizu, Masao.

In: Nippon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A, Vol. 70, No. 6, 06.2004, p. 843-849.

Research output: Contribution to journalArticle

@article{732a9f71dd614d8396a8a87934b09d00,
title = "The effect of fusing time on fatigue properties of thermally sprayed steel with Ni-based self-fluxing alloy",
abstract = "To investigate the effects of fusing conditions on the microstructures and on fatigue properties of thermally sprayed coating, three types of thermally sprayed specimen with different heating periods in the fusing process were prepared. Rotational bending fatigue tests and characterization of coating microstructures were carried out. By using a vacuum furnace for fusing, it is possible to get sprayed coating with very little porosity and high mechanical properties. Heating time in the fusing process strongly affects the fatigue properties; the longer the heating time, the lower the fatigue strength. This is because longer heating process induces a segregation of the chromium compound in the coated microstructures. In orier to achieve higher fatigue strength, shorter length fusing was performed by an induction heating system. However, the fatigue strength of the specimen is much lower than that of the vacuum furnace fused specimen. This is because a delamination between the coating layer and the substrate occurred during the fatigue process and the fatigue crack started at the newly created surfaces at the substrates.",
keywords = "Fatigue, Fracture Mechanism, Fusing Time, Ni-Based Self-Fluxing Alloy, Segregation",
author = "Hiroyuki Akebono and Ryohei Ito and Masahiro Fukumoto and Jun Komotori and Masao Shimizu",
year = "2004",
month = "6",
language = "English",
volume = "70",
pages = "843--849",
journal = "Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A",
issn = "0387-5008",
publisher = "Japan Society of Mechanical Engineers",
number = "6",

}

TY - JOUR

T1 - The effect of fusing time on fatigue properties of thermally sprayed steel with Ni-based self-fluxing alloy

AU - Akebono, Hiroyuki

AU - Ito, Ryohei

AU - Fukumoto, Masahiro

AU - Komotori, Jun

AU - Shimizu, Masao

PY - 2004/6

Y1 - 2004/6

N2 - To investigate the effects of fusing conditions on the microstructures and on fatigue properties of thermally sprayed coating, three types of thermally sprayed specimen with different heating periods in the fusing process were prepared. Rotational bending fatigue tests and characterization of coating microstructures were carried out. By using a vacuum furnace for fusing, it is possible to get sprayed coating with very little porosity and high mechanical properties. Heating time in the fusing process strongly affects the fatigue properties; the longer the heating time, the lower the fatigue strength. This is because longer heating process induces a segregation of the chromium compound in the coated microstructures. In orier to achieve higher fatigue strength, shorter length fusing was performed by an induction heating system. However, the fatigue strength of the specimen is much lower than that of the vacuum furnace fused specimen. This is because a delamination between the coating layer and the substrate occurred during the fatigue process and the fatigue crack started at the newly created surfaces at the substrates.

AB - To investigate the effects of fusing conditions on the microstructures and on fatigue properties of thermally sprayed coating, three types of thermally sprayed specimen with different heating periods in the fusing process were prepared. Rotational bending fatigue tests and characterization of coating microstructures were carried out. By using a vacuum furnace for fusing, it is possible to get sprayed coating with very little porosity and high mechanical properties. Heating time in the fusing process strongly affects the fatigue properties; the longer the heating time, the lower the fatigue strength. This is because longer heating process induces a segregation of the chromium compound in the coated microstructures. In orier to achieve higher fatigue strength, shorter length fusing was performed by an induction heating system. However, the fatigue strength of the specimen is much lower than that of the vacuum furnace fused specimen. This is because a delamination between the coating layer and the substrate occurred during the fatigue process and the fatigue crack started at the newly created surfaces at the substrates.

KW - Fatigue

KW - Fracture Mechanism

KW - Fusing Time

KW - Ni-Based Self-Fluxing Alloy

KW - Segregation

UR - http://www.scopus.com/inward/record.url?scp=4344606585&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=4344606585&partnerID=8YFLogxK

M3 - Article

AN - SCOPUS:4344606585

VL - 70

SP - 843

EP - 849

JO - Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A

JF - Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A

SN - 0387-5008

IS - 6

ER -