Three-dimensional microstructural modeling and homogenization of porous alumina with needle-like pores

Naoki Takano, Keiichi Kimura, Masaru Zako, Futoshi Kubo

Research output: Contribution to journalArticle

2 Citations (Scopus)

Abstract

In the development of functional ceramics, the study on the relation between the macroscopic properties and the microstructures has been a critical issue. However, it has not been made clear by many experimental works. On the other hand, this paper takes the computational mechanics approach using the homogenization method. To model the very complex microstructure architecture three-dimensionally, the image-based modeling technique is employed. A porous alumina with needle-like random pores with 3.1% porosity ratio is studied in this paper. The effect of the location of extracting the unit cell and its size on the homogenized elastic constants is investigated. Then, the predicted values were compared with the measured ones. As a result, a unit cell region expressed by one million voxel elements with 2 μm resolution provides very accurate prediction regardless of the location of the unit cell in the random microstructures. The error between the numerical prediction and the measurement is only 1%.

Original languageEnglish
Pages (from-to)519-526
Number of pages8
JournalJSME International Journal, Series A: Solid Mechanics and Material Engineering
Volume46
Issue number4
DOIs
Publication statusPublished - 2003 Oct
Externally publishedYes

Fingerprint

Aluminum Oxide
Needles
Alumina
Microstructure
Computational mechanics
Homogenization method
Elastic constants
Porosity

Keywords

  • Ceramics
  • Computational mechanics
  • Homogenization
  • Microstructure
  • Modeling
  • Numerical analysis
  • Porous material

ASJC Scopus subject areas

  • Mechanical Engineering
  • Materials Science(all)

Cite this

Three-dimensional microstructural modeling and homogenization of porous alumina with needle-like pores. / Takano, Naoki; Kimura, Keiichi; Zako, Masaru; Kubo, Futoshi.

In: JSME International Journal, Series A: Solid Mechanics and Material Engineering, Vol. 46, No. 4, 10.2003, p. 519-526.

Research output: Contribution to journalArticle

@article{9740758d30514859ad8c1abf6055e81e,
title = "Three-dimensional microstructural modeling and homogenization of porous alumina with needle-like pores",
abstract = "In the development of functional ceramics, the study on the relation between the macroscopic properties and the microstructures has been a critical issue. However, it has not been made clear by many experimental works. On the other hand, this paper takes the computational mechanics approach using the homogenization method. To model the very complex microstructure architecture three-dimensionally, the image-based modeling technique is employed. A porous alumina with needle-like random pores with 3.1{\%} porosity ratio is studied in this paper. The effect of the location of extracting the unit cell and its size on the homogenized elastic constants is investigated. Then, the predicted values were compared with the measured ones. As a result, a unit cell region expressed by one million voxel elements with 2 μm resolution provides very accurate prediction regardless of the location of the unit cell in the random microstructures. The error between the numerical prediction and the measurement is only 1{\%}.",
keywords = "Ceramics, Computational mechanics, Homogenization, Microstructure, Modeling, Numerical analysis, Porous material",
author = "Naoki Takano and Keiichi Kimura and Masaru Zako and Futoshi Kubo",
year = "2003",
month = "10",
doi = "10.1299/jsmea.46.519",
language = "English",
volume = "46",
pages = "519--526",
journal = "JSME International Journal, Series A: Solid Mechanics and Material Engineering",
issn = "1344-7912",
publisher = "Japan Society of Mechanical Engineers",
number = "4",

}

TY - JOUR

T1 - Three-dimensional microstructural modeling and homogenization of porous alumina with needle-like pores

AU - Takano, Naoki

AU - Kimura, Keiichi

AU - Zako, Masaru

AU - Kubo, Futoshi

PY - 2003/10

Y1 - 2003/10

N2 - In the development of functional ceramics, the study on the relation between the macroscopic properties and the microstructures has been a critical issue. However, it has not been made clear by many experimental works. On the other hand, this paper takes the computational mechanics approach using the homogenization method. To model the very complex microstructure architecture three-dimensionally, the image-based modeling technique is employed. A porous alumina with needle-like random pores with 3.1% porosity ratio is studied in this paper. The effect of the location of extracting the unit cell and its size on the homogenized elastic constants is investigated. Then, the predicted values were compared with the measured ones. As a result, a unit cell region expressed by one million voxel elements with 2 μm resolution provides very accurate prediction regardless of the location of the unit cell in the random microstructures. The error between the numerical prediction and the measurement is only 1%.

AB - In the development of functional ceramics, the study on the relation between the macroscopic properties and the microstructures has been a critical issue. However, it has not been made clear by many experimental works. On the other hand, this paper takes the computational mechanics approach using the homogenization method. To model the very complex microstructure architecture three-dimensionally, the image-based modeling technique is employed. A porous alumina with needle-like random pores with 3.1% porosity ratio is studied in this paper. The effect of the location of extracting the unit cell and its size on the homogenized elastic constants is investigated. Then, the predicted values were compared with the measured ones. As a result, a unit cell region expressed by one million voxel elements with 2 μm resolution provides very accurate prediction regardless of the location of the unit cell in the random microstructures. The error between the numerical prediction and the measurement is only 1%.

KW - Ceramics

KW - Computational mechanics

KW - Homogenization

KW - Microstructure

KW - Modeling

KW - Numerical analysis

KW - Porous material

UR - http://www.scopus.com/inward/record.url?scp=0346216933&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0346216933&partnerID=8YFLogxK

U2 - 10.1299/jsmea.46.519

DO - 10.1299/jsmea.46.519

M3 - Article

AN - SCOPUS:0346216933

VL - 46

SP - 519

EP - 526

JO - JSME International Journal, Series A: Solid Mechanics and Material Engineering

JF - JSME International Journal, Series A: Solid Mechanics and Material Engineering

SN - 1344-7912

IS - 4

ER -