Tool paths planning under window framing scheme for burr minimization

Sothea Kruy, Hideki Aoyama, Noriaki Sano

Research output: Contribution to journalArticle

Abstract

A burr has been basically defined as a thin ridge or area of roughness produced in cutting or shaping metal. This burr leads to an undesirable workpiece edge that must be removed to enhance the level of precision of the parts. However, the cost of deburring precision components can be a significant addition to the cost of the finished parts. This paper presents a basic framework for a burr prediction system in end-milling based upon burr formation models, cutting condition, and analytical cutting force models, Wedeveloped a representation in a CAD framework to illustrate the machining process upon a PC-based NC simulator. This NC simulator can predict burr dimension and location in the end-milling process as a preventive measurement method. In addition, a tool paths planning scheme was included in the system to avoid tool exits. This method provides a feasible way for suppressing exit burr formation in an automatic manner, and thus reduce the need for deburring. The effect of in-plane exit angle was also discussed in this study. A systematic comparison of the predicted and measured burr size over a wide range of cutting conditions confirms the validity of the proposed method.

Original languageEnglish
Pages (from-to)598-603
Number of pages6
JournalSeimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering
Volume81
Issue number6
DOIs
Publication statusPublished - 2015 Jun 1

Fingerprint

Motion planning
Deburring
Simulators
Milling (machining)
Costs
Computer aided design
Machining
Surface roughness
Metals

Keywords

  • Burr minimization
  • Burr prediction
  • Cutting force model
  • End-milling

ASJC Scopus subject areas

  • Mechanical Engineering

Cite this

Tool paths planning under window framing scheme for burr minimization. / Kruy, Sothea; Aoyama, Hideki; Sano, Noriaki.

In: Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering, Vol. 81, No. 6, 01.06.2015, p. 598-603.

Research output: Contribution to journalArticle

@article{6c8d097c37c74c52b6c46c8b3d70dbbd,
title = "Tool paths planning under window framing scheme for burr minimization",
abstract = "A burr has been basically defined as a thin ridge or area of roughness produced in cutting or shaping metal. This burr leads to an undesirable workpiece edge that must be removed to enhance the level of precision of the parts. However, the cost of deburring precision components can be a significant addition to the cost of the finished parts. This paper presents a basic framework for a burr prediction system in end-milling based upon burr formation models, cutting condition, and analytical cutting force models, Wedeveloped a representation in a CAD framework to illustrate the machining process upon a PC-based NC simulator. This NC simulator can predict burr dimension and location in the end-milling process as a preventive measurement method. In addition, a tool paths planning scheme was included in the system to avoid tool exits. This method provides a feasible way for suppressing exit burr formation in an automatic manner, and thus reduce the need for deburring. The effect of in-plane exit angle was also discussed in this study. A systematic comparison of the predicted and measured burr size over a wide range of cutting conditions confirms the validity of the proposed method.",
keywords = "Burr minimization, Burr prediction, Cutting force model, End-milling",
author = "Sothea Kruy and Hideki Aoyama and Noriaki Sano",
year = "2015",
month = "6",
day = "1",
doi = "10.2493/jjspe.81.598",
language = "English",
volume = "81",
pages = "598--603",
journal = "Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering",
issn = "0912-0289",
publisher = "Japan Society for Precision Engineering",
number = "6",

}

TY - JOUR

T1 - Tool paths planning under window framing scheme for burr minimization

AU - Kruy, Sothea

AU - Aoyama, Hideki

AU - Sano, Noriaki

PY - 2015/6/1

Y1 - 2015/6/1

N2 - A burr has been basically defined as a thin ridge or area of roughness produced in cutting or shaping metal. This burr leads to an undesirable workpiece edge that must be removed to enhance the level of precision of the parts. However, the cost of deburring precision components can be a significant addition to the cost of the finished parts. This paper presents a basic framework for a burr prediction system in end-milling based upon burr formation models, cutting condition, and analytical cutting force models, Wedeveloped a representation in a CAD framework to illustrate the machining process upon a PC-based NC simulator. This NC simulator can predict burr dimension and location in the end-milling process as a preventive measurement method. In addition, a tool paths planning scheme was included in the system to avoid tool exits. This method provides a feasible way for suppressing exit burr formation in an automatic manner, and thus reduce the need for deburring. The effect of in-plane exit angle was also discussed in this study. A systematic comparison of the predicted and measured burr size over a wide range of cutting conditions confirms the validity of the proposed method.

AB - A burr has been basically defined as a thin ridge or area of roughness produced in cutting or shaping metal. This burr leads to an undesirable workpiece edge that must be removed to enhance the level of precision of the parts. However, the cost of deburring precision components can be a significant addition to the cost of the finished parts. This paper presents a basic framework for a burr prediction system in end-milling based upon burr formation models, cutting condition, and analytical cutting force models, Wedeveloped a representation in a CAD framework to illustrate the machining process upon a PC-based NC simulator. This NC simulator can predict burr dimension and location in the end-milling process as a preventive measurement method. In addition, a tool paths planning scheme was included in the system to avoid tool exits. This method provides a feasible way for suppressing exit burr formation in an automatic manner, and thus reduce the need for deburring. The effect of in-plane exit angle was also discussed in this study. A systematic comparison of the predicted and measured burr size over a wide range of cutting conditions confirms the validity of the proposed method.

KW - Burr minimization

KW - Burr prediction

KW - Cutting force model

KW - End-milling

UR - http://www.scopus.com/inward/record.url?scp=84981742268&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84981742268&partnerID=8YFLogxK

U2 - 10.2493/jjspe.81.598

DO - 10.2493/jjspe.81.598

M3 - Article

VL - 81

SP - 598

EP - 603

JO - Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering

JF - Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering

SN - 0912-0289

IS - 6

ER -