Trellis coded modulation using partially overlapped signal sets of non-equiprobable signaling

M. Ariyoshi, Iwao Sasase

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

In conventional trellis coded modulation (TCM), a higher-ary modulation scheme combining with a convolutional code is employed not to expand the transmitted bandwidth. This forces the system to be attended by signal constellation expansion and increasing the average signal power. As solutions to avoid signal constellation expansion, TCM systems using totally overlapped signal sets (TO-TCM and RU-TCM) were proposed. These schemes can realize a coded modulation system with no signal constellation expansion and achieve more coding gain than conventional TCM. However, a problem that the systems with totally overlapped signal sets might be catastrophic has been remained. The authors propose a novel TCM system using partially overlapped signal sets of nonequiprobable signaling (PO-TCM-NE). This scheme employs the partially overlapped signal constellation to control increasing signal points, and to avoid catastrophic error propagation. The nonequiprobable signaling is employed to reduce average signal power. Coding gain of proposed PO-TCM-NE is considerably improved; in consequence the average signal power is reduced much lower than other TCM systems with equiprobable signaling.

Original languageEnglish
Title of host publicationWireless Networks - Catching the Mobile Future
Subtitle of host publication5th IEEE Intemational Symposium on Personal, Indoor and Mobile Radio Communications, PIMRC 1994 - Proceedings
EditorsRamjee Prasad, Jens C. Arnbak, Jos H. Weber
PublisherInstitute of Electrical and Electronics Engineers Inc.
Pages558-562
Number of pages5
ISBN (Electronic)9051991932
DOIs
Publication statusPublished - 1994 Jan 1
Event5th IEEE Intemational Symposium on Personal, Indoor and Mobile Radio Communications, PIMRC 1994 - The Hague, Netherlands
Duration: 1994 Sep 181994 Sep 22

Publication series

NameIEEE International Symposium on Personal, Indoor and Mobile Radio Communications, PIMRC
Volume2

Conference

Conference5th IEEE Intemational Symposium on Personal, Indoor and Mobile Radio Communications, PIMRC 1994
CountryNetherlands
CityThe Hague
Period94/9/1894/9/22

Fingerprint

Modulation
Convolutional codes
Bandwidth

ASJC Scopus subject areas

  • Electrical and Electronic Engineering

Cite this

Ariyoshi, M., & Sasase, I. (1994). Trellis coded modulation using partially overlapped signal sets of non-equiprobable signaling. In R. Prasad, J. C. Arnbak, & J. H. Weber (Eds.), Wireless Networks - Catching the Mobile Future: 5th IEEE Intemational Symposium on Personal, Indoor and Mobile Radio Communications, PIMRC 1994 - Proceedings (pp. 558-562). [529152] (IEEE International Symposium on Personal, Indoor and Mobile Radio Communications, PIMRC; Vol. 2). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/WNCMF.1994.529152

Trellis coded modulation using partially overlapped signal sets of non-equiprobable signaling. / Ariyoshi, M.; Sasase, Iwao.

Wireless Networks - Catching the Mobile Future: 5th IEEE Intemational Symposium on Personal, Indoor and Mobile Radio Communications, PIMRC 1994 - Proceedings. ed. / Ramjee Prasad; Jens C. Arnbak; Jos H. Weber. Institute of Electrical and Electronics Engineers Inc., 1994. p. 558-562 529152 (IEEE International Symposium on Personal, Indoor and Mobile Radio Communications, PIMRC; Vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ariyoshi, M & Sasase, I 1994, Trellis coded modulation using partially overlapped signal sets of non-equiprobable signaling. in R Prasad, JC Arnbak & JH Weber (eds), Wireless Networks - Catching the Mobile Future: 5th IEEE Intemational Symposium on Personal, Indoor and Mobile Radio Communications, PIMRC 1994 - Proceedings., 529152, IEEE International Symposium on Personal, Indoor and Mobile Radio Communications, PIMRC, vol. 2, Institute of Electrical and Electronics Engineers Inc., pp. 558-562, 5th IEEE Intemational Symposium on Personal, Indoor and Mobile Radio Communications, PIMRC 1994, The Hague, Netherlands, 94/9/18. https://doi.org/10.1109/WNCMF.1994.529152
Ariyoshi M, Sasase I. Trellis coded modulation using partially overlapped signal sets of non-equiprobable signaling. In Prasad R, Arnbak JC, Weber JH, editors, Wireless Networks - Catching the Mobile Future: 5th IEEE Intemational Symposium on Personal, Indoor and Mobile Radio Communications, PIMRC 1994 - Proceedings. Institute of Electrical and Electronics Engineers Inc. 1994. p. 558-562. 529152. (IEEE International Symposium on Personal, Indoor and Mobile Radio Communications, PIMRC). https://doi.org/10.1109/WNCMF.1994.529152
Ariyoshi, M. ; Sasase, Iwao. / Trellis coded modulation using partially overlapped signal sets of non-equiprobable signaling. Wireless Networks - Catching the Mobile Future: 5th IEEE Intemational Symposium on Personal, Indoor and Mobile Radio Communications, PIMRC 1994 - Proceedings. editor / Ramjee Prasad ; Jens C. Arnbak ; Jos H. Weber. Institute of Electrical and Electronics Engineers Inc., 1994. pp. 558-562 (IEEE International Symposium on Personal, Indoor and Mobile Radio Communications, PIMRC).
@inproceedings{2d37b94cd90c461c917e2c3aa4461e5b,
title = "Trellis coded modulation using partially overlapped signal sets of non-equiprobable signaling",
abstract = "In conventional trellis coded modulation (TCM), a higher-ary modulation scheme combining with a convolutional code is employed not to expand the transmitted bandwidth. This forces the system to be attended by signal constellation expansion and increasing the average signal power. As solutions to avoid signal constellation expansion, TCM systems using totally overlapped signal sets (TO-TCM and RU-TCM) were proposed. These schemes can realize a coded modulation system with no signal constellation expansion and achieve more coding gain than conventional TCM. However, a problem that the systems with totally overlapped signal sets might be catastrophic has been remained. The authors propose a novel TCM system using partially overlapped signal sets of nonequiprobable signaling (PO-TCM-NE). This scheme employs the partially overlapped signal constellation to control increasing signal points, and to avoid catastrophic error propagation. The nonequiprobable signaling is employed to reduce average signal power. Coding gain of proposed PO-TCM-NE is considerably improved; in consequence the average signal power is reduced much lower than other TCM systems with equiprobable signaling.",
author = "M. Ariyoshi and Iwao Sasase",
year = "1994",
month = "1",
day = "1",
doi = "10.1109/WNCMF.1994.529152",
language = "English",
series = "IEEE International Symposium on Personal, Indoor and Mobile Radio Communications, PIMRC",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
pages = "558--562",
editor = "Ramjee Prasad and Arnbak, {Jens C.} and Weber, {Jos H.}",
booktitle = "Wireless Networks - Catching the Mobile Future",

}

TY - GEN

T1 - Trellis coded modulation using partially overlapped signal sets of non-equiprobable signaling

AU - Ariyoshi, M.

AU - Sasase, Iwao

PY - 1994/1/1

Y1 - 1994/1/1

N2 - In conventional trellis coded modulation (TCM), a higher-ary modulation scheme combining with a convolutional code is employed not to expand the transmitted bandwidth. This forces the system to be attended by signal constellation expansion and increasing the average signal power. As solutions to avoid signal constellation expansion, TCM systems using totally overlapped signal sets (TO-TCM and RU-TCM) were proposed. These schemes can realize a coded modulation system with no signal constellation expansion and achieve more coding gain than conventional TCM. However, a problem that the systems with totally overlapped signal sets might be catastrophic has been remained. The authors propose a novel TCM system using partially overlapped signal sets of nonequiprobable signaling (PO-TCM-NE). This scheme employs the partially overlapped signal constellation to control increasing signal points, and to avoid catastrophic error propagation. The nonequiprobable signaling is employed to reduce average signal power. Coding gain of proposed PO-TCM-NE is considerably improved; in consequence the average signal power is reduced much lower than other TCM systems with equiprobable signaling.

AB - In conventional trellis coded modulation (TCM), a higher-ary modulation scheme combining with a convolutional code is employed not to expand the transmitted bandwidth. This forces the system to be attended by signal constellation expansion and increasing the average signal power. As solutions to avoid signal constellation expansion, TCM systems using totally overlapped signal sets (TO-TCM and RU-TCM) were proposed. These schemes can realize a coded modulation system with no signal constellation expansion and achieve more coding gain than conventional TCM. However, a problem that the systems with totally overlapped signal sets might be catastrophic has been remained. The authors propose a novel TCM system using partially overlapped signal sets of nonequiprobable signaling (PO-TCM-NE). This scheme employs the partially overlapped signal constellation to control increasing signal points, and to avoid catastrophic error propagation. The nonequiprobable signaling is employed to reduce average signal power. Coding gain of proposed PO-TCM-NE is considerably improved; in consequence the average signal power is reduced much lower than other TCM systems with equiprobable signaling.

UR - http://www.scopus.com/inward/record.url?scp=85063396134&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85063396134&partnerID=8YFLogxK

U2 - 10.1109/WNCMF.1994.529152

DO - 10.1109/WNCMF.1994.529152

M3 - Conference contribution

AN - SCOPUS:85063396134

T3 - IEEE International Symposium on Personal, Indoor and Mobile Radio Communications, PIMRC

SP - 558

EP - 562

BT - Wireless Networks - Catching the Mobile Future

A2 - Prasad, Ramjee

A2 - Arnbak, Jens C.

A2 - Weber, Jos H.

PB - Institute of Electrical and Electronics Engineers Inc.

ER -