Tribological action and cutting performance of MQL media in machining of aluminum

T. Wakabayashi; S. Suda; I. Inasaki; K. Terasaka; Y. Musha; Y. Toda

doi:10.1016/j.cirp.2007.05.025

Tribological action and cutting performance of MQL media in machining of aluminum

T. Wakabayashi, S. Suda, I. Inasaki, K. Terasaka, Y. Musha, Y. Toda

Department of Applied Chemistry

Research output: Contribution to journal › Article › peer-review

42 Citations (Scopus)

Abstract

The tribological action of MQL media and atmospheric carrier gases was investigated using controlled atmosphere cutting apparatus. The investigation demonstrated their adsorption behavior onto metal surfaces was in close connection with the cutting performance of a lubricant synthetic ester and carrier gases in practical MQL machining. In particular, the presence of oxygen resulted in unfavorable cutting phenomena in MQL machining of aluminum. A unique technique of MQL media treatment was further proposed to prepare oil mist sprays containing microdroplets of water. This advanced technique provided some possibilities of improving the tribological action of MQL media in machining of aluminum.

Original language	English
Pages (from-to)	97-100
Number of pages	4
Journal	CIRP Annals - Manufacturing Technology
Volume	56
Issue number	1
DOIs	https://doi.org/10.1016/j.cirp.2007.05.025
Publication status	Published - 2007

Keywords

Cutting
Environmental
Tribology

ASJC Scopus subject areas

Mechanical Engineering
Industrial and Manufacturing Engineering

Access to Document

10.1016/j.cirp.2007.05.025

Cite this

@article{a4b55d27afc44e309eb1fee1db60c93c,

title = "Tribological action and cutting performance of MQL media in machining of aluminum",

abstract = "The tribological action of MQL media and atmospheric carrier gases was investigated using controlled atmosphere cutting apparatus. The investigation demonstrated their adsorption behavior onto metal surfaces was in close connection with the cutting performance of a lubricant synthetic ester and carrier gases in practical MQL machining. In particular, the presence of oxygen resulted in unfavorable cutting phenomena in MQL machining of aluminum. A unique technique of MQL media treatment was further proposed to prepare oil mist sprays containing microdroplets of water. This advanced technique provided some possibilities of improving the tribological action of MQL media in machining of aluminum.",

keywords = "Cutting, Environmental, Tribology",

author = "T. Wakabayashi and S. Suda and I. Inasaki and K. Terasaka and Y. Musha and Y. Toda",

note = "Funding Information: This work is supported in part by Grant-in-aid for Scientific Research (C) from Japan Society for the Promotion of Science. Copyright: Copyright 2017 Elsevier B.V., All rights reserved.",

year = "2007",

doi = "10.1016/j.cirp.2007.05.025",

language = "English",

volume = "56",

pages = "97--100",

journal = "CIRP Annals - Manufacturing Technology",

issn = "0007-8506",

publisher = "Elsevier USA",

number = "1",

}

TY - JOUR

T1 - Tribological action and cutting performance of MQL media in machining of aluminum

AU - Wakabayashi, T.

AU - Suda, S.

AU - Inasaki, I.

AU - Terasaka, K.

AU - Musha, Y.

AU - Toda, Y.

N1 - Funding Information: This work is supported in part by Grant-in-aid for Scientific Research (C) from Japan Society for the Promotion of Science. Copyright: Copyright 2017 Elsevier B.V., All rights reserved.

PY - 2007

Y1 - 2007

N2 - The tribological action of MQL media and atmospheric carrier gases was investigated using controlled atmosphere cutting apparatus. The investigation demonstrated their adsorption behavior onto metal surfaces was in close connection with the cutting performance of a lubricant synthetic ester and carrier gases in practical MQL machining. In particular, the presence of oxygen resulted in unfavorable cutting phenomena in MQL machining of aluminum. A unique technique of MQL media treatment was further proposed to prepare oil mist sprays containing microdroplets of water. This advanced technique provided some possibilities of improving the tribological action of MQL media in machining of aluminum.

AB - The tribological action of MQL media and atmospheric carrier gases was investigated using controlled atmosphere cutting apparatus. The investigation demonstrated their adsorption behavior onto metal surfaces was in close connection with the cutting performance of a lubricant synthetic ester and carrier gases in practical MQL machining. In particular, the presence of oxygen resulted in unfavorable cutting phenomena in MQL machining of aluminum. A unique technique of MQL media treatment was further proposed to prepare oil mist sprays containing microdroplets of water. This advanced technique provided some possibilities of improving the tribological action of MQL media in machining of aluminum.

KW - Cutting

KW - Environmental

KW - Tribology

UR - http://www.scopus.com/inward/record.url?scp=73249128415&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=73249128415&partnerID=8YFLogxK

U2 - 10.1016/j.cirp.2007.05.025

DO - 10.1016/j.cirp.2007.05.025

M3 - Article

AN - SCOPUS:73249128415

SN - 0007-8506

VL - 56

SP - 97

EP - 100

JO - CIRP Annals - Manufacturing Technology

JF - CIRP Annals - Manufacturing Technology

IS - 1

ER -

Tribological action and cutting performance of MQL media in machining of aluminum

Abstract

Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this