Vibration suppression control by band-limited disturbance/internal disturbance cancelation using relative acceleration

Yuki Yamada, Yasuhiro Kakinuma

Research output: Contribution to journalArticle

Abstract

This study presents the method of active vibration damping in cutting using relative acceleration, which is intended for full-closed controlled hall-screw-driven stage. Disturbance against rigid body motion is canceled out by using mulli-encodcr-bascd disturbance observer. Disturbance/internal disturbance against relative motion is canceled out by using relative acceleration instead of relative velocity or displacement. The use of acceleration signal recovers phase lag and leads to suppress vibration in higher frequencies. In addition, it enhances low-frequency cutoff characteristics in extracting relative motion, which enables band-limited vibration control separating the rigid body and the relative motion. By introducing suitable phase lead filter which makes phase shift zero between load force and current response, vibration of the tabic can be effectively suppressed without significantly changing the resonance frequency. The results of end milling tests show that the vibration near the resonance frequency is suppressed by relative acceleration feedback.

Original languageEnglish
Pages (from-to)1041-1048
Number of pages8
JournalSeimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering
Volume83
Issue number11
Publication statusPublished - 2017

Keywords

  • Active damping
  • Ball screw
  • Band-limited control
  • Disturbance observer
  • Relative acceleration

ASJC Scopus subject areas

  • Mechanical Engineering

Fingerprint Dive into the research topics of 'Vibration suppression control by band-limited disturbance/internal disturbance cancelation using relative acceleration'. Together they form a unique fingerprint.

  • Cite this