• 745 引用
  • 14 h指数
1984 …2020

年単位の研究成果

Pureに変更を加えた場合、すぐここに表示されます。

研究成果

フィルター
Conference contribution
2018

Method of emerging delight design based on Kansei

Tanaka, Y. & Aoyama, H., 2018 1 1, 38th Computers and Information in Engineering Conference. American Society of Mechanical Engineers (ASME), 巻 1B-2018.

研究成果: Conference contribution

2017

Basic study on development of delight design method -proposal and application of beer cup design based on value model and evaluation model of kansei

Tanaka, Y., Misaka, M. & Aoyama, H., 2017 1 1, 37th Computers and Information in Engineering Conference. American Society of Mechanical Engineers (ASME), 巻 1. 68089

研究成果: Conference contribution

Digital design method of dyeing patterns based on kansei

Ichimura, Y. & Aoyama, H., 2017 1 1, 37th Computers and Information in Engineering Conference. American Society of Mechanical Engineers (ASME), 巻 1. 67244

研究成果: Conference contribution

Method for producing three-dimensional designs in film insert molding

Fujii, S., Aoyama, H., Mori, Y., Azagami, Y. & Harada, S., 2017, Systems, Design, and Complexity. American Society of Mechanical Engineers (ASME), (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); 巻数 11).

研究成果: Conference contribution

Study on digital style design - Robust design system for Kansei using multivariate analysis and taguchi method

Aoyama, H. & Yokoyama, H., 2017 1 1, Proceedings of the International Conference on Interfaces and Human Computer Interaction 2017 - Part of the Multi Conference on Computer Science and Information Systems 2017. IADIS, p. 10-18 9 p.

研究成果: Conference contribution

2016

Burr prediction due to flank wear in end-milling

Kruy, S. & Aoyama, H., 2016 12 16, International Symposium on Flexible Automation, ISFA 2016. Institute of Electrical and Electronics Engineers Inc., p. 412-417 6 p. 7790198

研究成果: Conference contribution

2015

A method for identification of control parameters of NC machine tool and its utilization for high-speed machining and accurate machining time estimation

Yamamoto, Y., Aoyama, H. & Sano, N., 2015 10 18, Proceedings of the 8th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2015. Japan Society of Mechanical Engineers

研究成果: Conference contribution

Digital design of crack patterns with natural impressions on pottery

Shimizu, K. & Aoyama, H., 2015, 35th Computers and Information in Engineering Conference. American Society of Mechanical Engineers (ASME), 巻 1B-2015.

研究成果: Conference contribution

2 引用 (Scopus)

High efficiency machining of curved surfaces using 5 axis machine tool

Yamagata, S., Aoyama, H. & Sano, N., 2015 10 18, Proceedings of the 8th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2015. Japan Society of Mechanical Engineers

研究成果: Conference contribution

2014

Curved surfaces forming of sheet material by laser irradiation

Kishida, K., Aoyama, H., Matsushita, N. & Ushimaru, A., 2014 1 1, Advances in Abrasive Technology XVII. Yan, J., Aoyama, H. & Yui, A. (版). Trans Tech Publications Ltd, p. 788-793 6 p. (Advanced Materials Research; 巻数 1017).

研究成果: Conference contribution

Fabric simulation using measurement data for dress design

Hara, A., Aoyama, H. & Oya, T., 2014, 34th Computers and Information in Engineering Conference. American Society of Mechanical Engineers (ASME), 巻 1B.

研究成果: Conference contribution

Robust design on Kansei of product satisfying emotion and preference of target customers using Taguchi method

Aoyama, H., Kawamura, Y. & Oya, T., 2014, 34th Computers and Information in Engineering Conference. American Society of Mechanical Engineers (ASME), 巻 1A.

研究成果: Conference contribution

2013

Effectiveness of ultrasonic vibration on press forming

Ashida, Y. & Aoyama, H., 2013 10 25, Advances in Abrasive Technology XVI. p. 350-355 6 p. (Advanced Materials Research; 巻数 797).

研究成果: Conference contribution

Low cost mixed reality system using projectors for evaluation of product design (shape and function structure)

Chinone, Y., Aoyama, H. & Oya, T., 2013 1 1, 33rd Computers and Information in Engineering Conference. American Society of Mechanical Engineers, V02BT02A033. (Proceedings of the ASME Design Engineering Technical Conference; 巻数 2 B).

研究成果: Conference contribution

Selecting a CNC machine tool using the intuitionistic fuzzy TOPSIS approach for FMC

Tho, N. H., Dawal, S. Z. M., Yusoff, N., Tahriri, F. & Aoyama, H., 2013 4 24, Mechanical and Manufacturing Engineering. p. 196-205 10 p. (Applied Mechanics and Materials; 巻数 315).

研究成果: Conference contribution

3 引用 (Scopus)

Study on method to generate wood grain pattern representing required impression

Akiyama, R., Mori, T., Aoyama, H. & Oya, T., 2013 1 1, 33rd Computers and Information in Engineering Conference. American Society of Mechanical Engineers, V02AT02A051. (Proceedings of the ASME Design Engineering Technical Conference; 巻数 2 A).

研究成果: Conference contribution

Style design system based on high-quality aesthetic shapes to support designer's creative activity

Kimura, F., Oya, T. & Aoyama, H., 2013 1 1, 33rd Computers and Information in Engineering Conference. American Society of Mechanical Engineers, V02AT02A059. (Proceedings of the ASME Design Engineering Technical Conference; 巻数 2 A).

研究成果: Conference contribution

2012

Application of robust design approach for design parameterization in Kansei engineering

Sutono, S. B., Taha, Z., Rashid, S. H. A., Aoyama, H. & Subagyo, 2012 3 26, Advanced Mechanical Design. p. 1670-1680 11 p. (Advanced Materials Research; 巻数 479-481).

研究成果: Conference contribution

7 引用 (Scopus)

Automatic reverse engineering based on reconstructing measurement data in 3D-lattice

Tsushima, K. & Aoyama, H., 2012 1 1, Emerging Technology in Precision Engineering XIV. Trans Tech Publications Ltd, p. 414-419 6 p. (Key Engineering Materials; 巻数 523-524).

研究成果: Conference contribution

2 引用 (Scopus)

Basic study on laser forming method for curved surfaces

Keisuke, K., Nakamura, T., Aoyama, H., Matsushita, N. & Ushimaru, A., 2012 1 1, Emerging Technology in Precision Engineering XIV. Trans Tech Publications Ltd, p. 995-1000 6 p. (Key Engineering Materials; 巻数 523-524).

研究成果: Conference contribution

2 引用 (Scopus)

CAD system for utilizing design information and know-how based on function features

Ando, S., Aoyama, H. & Sano, N., 2012 1 1, ASME/ISCIE 2012 International Symposium on Flexible Automation, ISFA 2012. American Society of Mechanical Engineers (ASME), p. 47-52 6 p. (ASME/ISCIE 2012 International Symposium on Flexible Automation, ISFA 2012).

研究成果: Conference contribution

2 引用 (Scopus)

Coupling of packaging efficiency and aesthetic shapes for PET bottles

Widiyati, K. & Aoyama, H., 2012 12 1, ASME 2012 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE 2012. PARTS A AND B 版 p. 551-558 8 p. (Proceedings of the ASME Design Engineering Technical Conference; 巻数 2, 番号 PARTS A AND B).

研究成果: Conference contribution

Determination method of locations and postures of cutting tool for 5-axis machining based on intuition and minimum cusp height

Aoyama, H., Suzuki, Y. & Sano, N., 2012 1 1, Proceedings of Precision Engineering and Nanotechnology. Trans Tech Publications Ltd, p. 96-101 6 p. (Key Engineering Materials; 巻数 516).

研究成果: Conference contribution

Emergence system of pattern design showing natural impression

Kamahara, Y., Aoyama, H. & Oya, T., 2012 12 1, ASME 2012 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE 2012. PARTS A AND B 版 p. 637-644 8 p. (Proceedings of the ASME Design Engineering Technical Conference; 巻数 2, 番号 PARTS A AND B).

研究成果: Conference contribution

Estimation system of accurate cutting time based on actual feedrate identification

Saito, K., Aoyama, H. & Sano, N., 2012 1 1, Proceedings of Precision Engineering and Nanotechnology. Trans Tech Publications Ltd, p. 113-118 6 p. (Key Engineering Materials; 巻数 516).

研究成果: Conference contribution

1 引用 (Scopus)

Generation of NC program for realizing high speed feed rate of cutting tool

Sakurai, S., Aoyama, H. & Sano, N., 2012 1 1, Emerging Technology in Precision Engineering XIV. Trans Tech Publications Ltd, p. 398-403 6 p. (Key Engineering Materials; 巻数 523-524).

研究成果: Conference contribution

1 引用 (Scopus)

Gripping stability to assess aesthetical shape: A pet bottle case study

Widiyati, K. & Hideki, A., 2012 11 23, Machine Design and Manufacturing Engineering. p. 454-461 8 p. (Advanced Materials Research; 巻数 566).

研究成果: Conference contribution

1 引用 (Scopus)

Method to decide paths and postures of flat end mill for 5-axis control machining based on minimum cusp height

Hokkyo, T., Aoyama, H. & Sano, N., 2012 1 1, Emerging Technology in Precision Engineering XIV. Trans Tech Publications Ltd, p. 380-385 6 p. (Key Engineering Materials; 巻数 523-524).

研究成果: Conference contribution

Style design system based on Class A Bézier curves for high-quality aesthetic shapes

Oya, T., Kimura, F. & Aoyama, H., 2012 12 1, ASME 2012 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE 2012. PARTS A AND B 版 p. 627-635 9 p. (Proceedings of the ASME Design Engineering Technical Conference; 巻数 2, 番号 PARTS A AND B).

研究成果: Conference contribution

3 引用 (Scopus)
2011

A study of kansei engineering in pet bottle silhouette

Widiyati, K. & Aoyama, H., 2011 12 1, ASME 2011 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE 2011. PARTS A AND B 版 p. 849-858 10 p. (Proceedings of the ASME Design Engineering Technical Conference; 巻数 2, 番号 PARTS A AND B).

研究成果: Conference contribution

9 引用 (Scopus)

Design creation system based on designer's Kansei and consumer's preference

Aoyama, H. & Ohshima, K., 2011 12 1, Proceedings of the IADIS International Conference Interfaces and Human Computer Interaction 2011, Part of the IADIS Multi Conference on Computer Science and Information Systems 2011, MCCSIS 2011. p. 241-248 8 p. (Proceedings of the IADIS International Conference Interfaces and Human Computer Interaction 2011, Part of the IADIS Multi Conference on Computer Science and Information Systems 2011, MCCSIS 2011).

研究成果: Conference contribution

Development of system for high quality wood grain design

Mori, T., Shibasaki, S. & Aoyama, H., 2011 12 1, ASME 2011 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE 2011. PARTS A AND B 版 p. 907-915 9 p. (Proceedings of the ASME Design Engineering Technical Conference; 巻数 2, 番号 PARTS A AND B).

研究成果: Conference contribution

2 引用 (Scopus)

Reverse engineering system based on uniforming measurement data in 3D-lattice

Shibata, G., Aoyama, H. & Sato, M., 2011 12 1, ASME 2011 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE 2011. PARTS A AND B 版 p. 887-895 9 p. (Proceedings of the ASME Design Engineering Technical Conference; 巻数 2, 番号 PARTS A AND B).

研究成果: Conference contribution

Virtual clay modeling system based on aesthetic curves

Aoyama, H. & Kai, H., 2011 12 1, ASME 2011 World Conference on Innovative Virtual Reality, WINVR 2011. p. 97-102 6 p. (ASME 2011 World Conference on Innovative Virtual Reality, WINVR 2011).

研究成果: Conference contribution

2010

A proposed study on facility planning and design in manufacturing process

Dwijayanti, K., Dawal, S. Z. M., Jamasri & Aoyama, H., 2010 12 1, Proceedings of the International MultiConference of Engineers and Computer Scientists 2010, IMECS 2010. p. 1640-1645 6 p. (Proceedings of the International MultiConference of Engineers and Computer Scientists 2010, IMECS 2010).

研究成果: Conference contribution

10 引用 (Scopus)

Capture, recognition, and visualization of human semantic interactions in meetings

Yu, Z., Yu, Z., Aoyama, H., Ozeki, M. & Nakamura, Y., 2010, 2010 IEEE International Conference on Pervasive Computing and Communications, PerCom 2010. IEEE Computer Society, p. 107-115 9 p. 5466987. (2010 IEEE International Conference on Pervasive Computing and Communications, PerCom 2010).

研究成果: Conference contribution

21 引用 (Scopus)

Design emerging system by applying consumer's preference to designer's idea

Ohshima, K. & Aoyama, H., 2010 12 1, ASME 2010 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2010. PARTS A AND B 版 p. 605-614 10 p. (Proceedings of the ASME Design Engineering Technical Conference; 巻数 3, 番号 PARTS A AND B).

研究成果: Conference contribution

Development of a crush and mix machine for composite brick fabrication

Sothea, K., Fazli, N., Hamdi, M. & Aoyama, H., 2010 12 1, International Conference on Advances in Materials and Processing Technologies, AMPT2010. p. 1437-1442 6 p. (AIP Conference Proceedings; 巻数 1315).

研究成果: Conference contribution

Development of CAD system based on function features

Ando, S., Ikeda, R., Aoyama, H. & Hiruma, N., 2010 1 1, Advances in Precision Engineering. Trans Tech Publications Ltd, p. 442-446 5 p. (Key Engineering Materials; 巻数 447 448).

研究成果: Conference contribution

Development of wood grain pattern design system

Shibasaki, S. & Aoyama, H., 2010 6 25, Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2009, DETC2009. PART B 版 p. 941-948 8 p. (Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2009, DETC2009; 巻数 2, 番号 PART B).

研究成果: Conference contribution

Linkage of power consumption to design feature on turning process

Taha, Z., Kurniati, H., Aoyama, H., Ghazilla, R. A., Gonzales, J. & Sakundarini, N., 2010 12 1, Proceedings of the 10th WSEAS International Conference on Robotics, Control and Manufacturing Technology, ROCOM '10. p. 74-78 5 p. (Proceedings of the 10th WSEAS International Conference on Robotics, Control and ManufProceedings of the 10th WSEAS International Conference on Robotics, Control and Manufacturing Technology, ROCOM '10).

研究成果: Conference contribution

7 引用 (Scopus)

Product function - Component modeling using rough sets

Miwa, T. & Aoyama, H., 2010 6 25, Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2009, DETC2009. PART A 版 p. 167-175 9 p. (Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2009, DETC2009; 巻数 8, 番号 PART A).

研究成果: Conference contribution

System for 3D form generation and impression analysis based on emotional words: "Kansei words

Aoyama, H. & Miyauchi, S., 2010 12 1, ASME 2010 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2010. PARTS A AND B 版 p. 615-621 7 p. (Proceedings of the ASME Design Engineering Technical Conference; 巻数 3, 番号 PARTS A AND B).

研究成果: Conference contribution

2 引用 (Scopus)
2009

Basic study on parameters to quantitatively evaluate shape impression

Takeda, K. & Aoyama, H., 2009 11 23, 2008 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC 2008. PART B 版 p. 851-858 8 p. (2008 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC 2008; 巻数 3, 番号 PART B).

研究成果: Conference contribution

1 引用 (Scopus)

Basic study on trend prediction for style design

Yoshida, S. & Aoyama, H., 2009 11 23, 2008 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC 2008. PART B 版 p. 859-866 8 p. (2008 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC 2008; 巻数 3, 番号 PART B).

研究成果: Conference contribution

Collaboration design system using internet and virtual reality technology

Aoyama, H. & Iida, R., 2009 12 1, Virtual and Mixed Reality - Third International Conference, VMR 2009, Held as Part of HCI International 2009, Proceedings. p. 513-521 9 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); 巻数 5622 LNCS).

研究成果: Conference contribution

1 引用 (Scopus)

Computer aided style design system based on highlight lines

Yano, S. & Aoyama, H., 2009 12 1, ASME 2009 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2009. PARTS A AND B 版 p. 957-965 9 p. (Proceedings of the ASME Design Engineering Technical Conference; 巻数 2, 番号 PARTS A AND B).

研究成果: Conference contribution

Electrode design for oscillating EDM

Nakamura, Y., Sriani, T. & Aoyama, H., 2009 12 1, Advances in Abrasive Technology XII. p. 645-650 6 p. (Advanced Materials Research; 巻数 76-78).

研究成果: Conference contribution

Probabilistic evaluation of product development task planning us worth flow analysis

Miwa, T., Aoyama, H. & Lshii, K., 2009 11 23, 2008 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC 2008. p. 227-235 9 p. (2008 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC 2008; 巻数 5).

研究成果: Conference contribution