年別の研究成果
年別の研究成果
- 1 - 50 / 239 件
検索結果
-
2023
Towards understanding the mechanism of vibration-assisted cutting of monocrystalline silicon by cyclic nanoindentation
Huang, W. & Yan, J., 2023 1月, In: Journal of Materials Processing Technology. 311, 117797.研究成果: Article › 査読
-
2022
Achieving Superhydrophobicity of Zr-Based Metallic Glass Surfaces with Tunable Adhesion by Nanosecond Laser Ablation and Annealing
Cui, M., Huang, H., Wang, C., Zhang, L. & Yan, J., 2022 8月 31, In: ACS Applied Materials and Interfaces. 14, 34, p. 39567-39576 10 p.研究成果: Article › 査読
1 被引用数 (Scopus) -
A novel method for fabricating micro-dimple arrays with good surface quality on metallic glass substrate by combining laser irradiation and mechanical polishing under wax sealing
Huang, H., Qian, Y., Zhang, L., Jiang, M. & Yan, J., 2022 7月, In: Journal of Manufacturing Processes. 79, p. 911-923 13 p.研究成果: Article › 査読
1 被引用数 (Scopus) -
Crack Propagation Behavior of Fused Silica during Cyclic Indentation under Incremental Loads
Kosai, K., Zhao, Y. & Yan, J., 2022 7月 1, In: Applied Sciences (Switzerland). 12, 13, 6589.研究成果: Article › 査読
Open Access -
Design and fabrication of micro and nano surface structures for enhancing metal–polymer adhesion using femtosecond laser treatment
Omiya, M., Nakajima, A. & Yan, J., 2022 12月, In: Materials and Design. 224, 111349.研究成果: Article › 査読
Open Access -
Development of High-Sensitivity Electrically Conductive Composite Elements by Press Molding of Polymer and Carbon Nanofibers
Aikawa, S., Zhao, Y. & Yan, J., 2022 2月, In: Micromachines. 13, 2, 170.研究成果: Article › 査読
Open Access1 被引用数 (Scopus) -
Direct Observation of Discharge Phenomena in Vibration-Assisted Micro EDM of Array Structures
Esser, G. & Yan, J., 2022 8月, In: Micromachines. 13, 8, 1286.研究成果: Article › 査読
Open Access1 被引用数 (Scopus) -
Dynamic modeling and in-process parametric compensation for fabricating micro straight thin walls by micromilling
Li, Y., Cheng, X., Zheng, G., Yan, J., Liu, H. & Li, X., 2022 5月, In: Journal of Materials Research and Technology. 18, p. 2480-2493 14 p.研究成果: Article › 査読
Open Access -
Exploratory investigation of chip formation and surface integrity in ultra-high-speed gear hobbing
Ueda, Y., Sakurai, N., Takagi, T., Ishizu, K. & Yan, J., 2022 1月, In: CIRP Annals. 71, 1, p. 89-92 4 p.研究成果: Article › 査読
-
Fabrication of micro-structured surface with controllable randomness by using FTS-based diamond turning
Tanikawa, S. & Yan, J., 2022 1月, In: Precision Engineering. 73, p. 363-376 14 p.研究成果: Article › 査読
3 被引用数 (Scopus) -
Flexible fabrication of Fresnel micro-lens array by off-spindle-axis diamond turning and precision glass molding
Zhang, L., Yi, A. Y. & Yan, J., 2022 3月, In: Precision Engineering. 74, p. 186-194 9 p.研究成果: Article › 査読
-
Formation, evolution and characterization of nanoporous structures on the Ti6Al4V surface induced by nanosecond pulse laser irradiation
Wang, C., Huang, H., Zhang, Z., Zhang, L., Yan, J. & Ren, L., 2022 11月, In: Materials and Design. 223, 111243.研究成果: Article › 査読
Open Access -
Generation of micro/nano hybrid surface structures on copper by femtosecond pulsed laser irradiation
Nakajima, A., Omiya, M. & Yan, J., 2022 9月, In: Nanomanufacturing and Metrology. 5, 3, p. 274-282 9 p.研究成果: Article › 査読
Open Access1 被引用数 (Scopus) -
Micro Electrical Discharge Machining of Ultrafine Particle Type Tungsten Carbide Using Dielectrics Mixed with Various Powders
Gattu, S. D. & Yan, J., 2022 7月, In: Micromachines. 13, 7, 998.研究成果: Article › 査読
Open Access3 被引用数 (Scopus) -
Microstructure and mechanical properties of SiC particle reinforced Zr-based metallic glass surface composite layers produced by laser alloying
Qian, Y., Zhang, D., Hong, J., Zhang, L., Jiang, M., Huang, H. & Yan, J., 2022 9月 25, In: Surface and Coatings Technology. 446, 128784.研究成果: Article › 査読
-
Microstructures and mechanical properties of Zr-based metallic glass ablated by nanosecond pulsed laser in various gas atmospheres
Qian, Y., Jiang, M., Zhang, Z., Huang, H., Hong, J. & Yan, J., 2022 4月 25, In: Journal of Alloys and Compounds. 901, 163717.研究成果: Article › 査読
5 被引用数 (Scopus) -
Nanosecond pulsed laser-induced formation of nanopattern on Fe-based metallic glass surface
Qian, Y., Huang, H., Jiang, M. & Yan, J., 2022 3月 1, In: Applied Surface Science. 577, 151976.研究成果: Article › 査読
7 被引用数 (Scopus) -
Nitrogen assisted formation of large-area ripples on Ti6Al4V surface by nanosecond pulse laser irradiation
Wang, C., Huang, H., Qian, Y., Zhang, Z., Huang, W. & Yan, J., 2022 1月, In: Precision Engineering. 73, p. 244-256 13 p.研究成果: Article › 査読
9 被引用数 (Scopus) -
On the conversion of point-to-linear hierarchical micro/nano-structures on the glassy carbon surface by nanosecond pulsed laser irradiation
Wang, C., Zhang, H., Huang, H., Zhang, Z., Zhang, L. & Yan, J., 2022 10月 15, In: Applied Surface Science. 599, 153978.研究成果: Article › 査読
-
Response of Resin Coating Films Containing Fine Metal Particles to Ultrashort Laser Pulses
Nakajima, A. & Yan, J., 2022 4月, In: International Journal of Precision Engineering and Manufacturing. 23, 4, p. 385-393 9 p.研究成果: Article › 査読
-
Study on nano-graphitic carbon coating on Si mold insert for precision glass molding
Zhang, L. & Yan, J., 2022 10月 25, In: Surface and Coatings Technology. 448, 128893.研究成果: Article › 査読
-
Surface hardening of Zr-based metallic glass via laser surface alloying with silicon powder
Zhang, D., Qian, Y., Zhang, L., Huang, H. & Yan, J., 2022 11月, In: Scripta Materialia. 220, 114940.研究成果: Article › 査読
-
The effects of simultaneous laser nitriding and texturing on surface hardness and tribological properties of Ti6Al4V
Wang, C., Hong, J., Cui, M., Huang, H., Zhang, L. & Yan, J., 2022 5月 15, In: Surface and Coatings Technology. 437, 128358.研究成果: Article › 査読
4 被引用数 (Scopus) -
Tool path generation and optimization for freeform surface diamond turning based on an independently controlled fast tool servo
Sato, Y. & Yan, J., 2022 6月, In: International Journal of Extreme Manufacturing. 4, 2, 025102.研究成果: Article › 査読
Open Access4 被引用数 (Scopus) -
Visualization of indentation induced sub-surface shear bands of Zr-based metallic glass by nanosecond pulse laser irradiation
Cui, M., Huang, H., Wang, C., Qian, Y., Zhang, L., Zhang, Z. & Yan, J., 2022 8月, In: Vacuum. 202, 111141.研究成果: Article › 査読
-
超音波振動援用研削による炭素系難削材の加工
Yan, J., 2022, In: Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 88, 7, p. 541-545 5 p.研究成果: Article › 査読
-
2021
Annealed high-phosphorus electroless Ni–P coatings for producing molds for precision glass molding
Yu, Q., Zhou, T., He, Y., Liu, P., Wang, X., Jiang, Y. & Yan, J., 2021 4月 1, In: Materials Chemistry and Physics. 262, 124297.研究成果: Article › 査読
7 被引用数 (Scopus) -
Chip-free surface patterning of toxic brittle polycrystalline materials through micro/nanoscale burnishing
Huang, W. & Yan, J., 2021 3月, In: International Journal of Machine Tools and Manufacture. 162, 103688.研究成果: Article › 査読
10 被引用数 (Scopus) -
Deformation behaviour of soft-brittle polycrystalline materials determined by nanoscratching with a sharp indenter
Huang, W. & Yan, J., 2021 11月, In: Precision Engineering. 72, p. 717-729 13 p.研究成果: Article › 査読
8 被引用数 (Scopus) -
Deterministic error compensation for slow tool servo-driven diamond turning of freeform surface with nanometric form accuracy
Nagayama, K. & Yan, J., 2021 4月, In: Journal of Manufacturing Processes. 64, p. 45-57 13 p.研究成果: Article › 査読
23 被引用数 (Scopus) -
Diffraction manipulation of visible light with submicron structures for structural coloration fabrication
He, Y., Zhou, T., Dong, X., Zhu, Z., Yu, Q., Liu, P., Zhao, W., Wang, X., Hu, Y. & Yan, J., 2021 3月 15, In: Optics Express. 29, 6, p. 9294-9311 18 p.研究成果: Article › 査読
Open Access5 被引用数 (Scopus) -
Effects of relative tool sharpness on surface generation mechanism of precision turning of electroless nickel-phosphorus coating
Yu, Q., Zhou, T., He, Y., Liu, P., Wang, X. & Yan, J., 2021 7月, In: Journal of Mechanical Science and Technology. 35, 7, p. 3113-3121 9 p.研究成果: Article › 査読
3 被引用数 (Scopus) -
Evolution and control of deformation mechanisms in micro-grooving of Zr-based metallic glass
Qiu, P., Meng, B., Xu, S., Rong, Y. & Yan, J., 2021 8月, In: Journal of Manufacturing Processes. 68, p. 923-931 9 p.研究成果: Article › 査読
6 被引用数 (Scopus) -
Evolution of high-pressure metastable phase Si-XIII during silicon nanoindentation: A molecular dynamics study
Zhang, L. & Yan, J., 2021 4月 15, In: Computational Materials Science. 191, 110344.研究成果: Article › 査読
2 被引用数 (Scopus) -
Fundamental investigation of diamond cutting of micro v-shaped grooves on a polycrystalline soft-brittle material
Huang, W. & Yan, J., 2021 3月, In: Journal of Manufacturing and Materials Processing. 5, 1, 17.研究成果: Article › 査読
Open Access5 被引用数 (Scopus) -
Influence of Wax Lubrication on Cutting Performance of Single-Crystal Silicon in Ultraprecision Microgrooving
Ameli Kalkhoran, S. N., Vahdati, M., Zhang, Z. & Yan, J., 2021 3月, In: International Journal of Precision Engineering and Manufacturing - Green Technology. 8, 2, p. 611-624 14 p.研究成果: Article › 査読
3 被引用数 (Scopus) -
Laser nitriding of Zr-based metallic glass: An investigation by orthogonal experiments
Hong, J., Qian, Y., Zhang, L., Huang, H., Jiang, M. & Yan, J., 2021 10月 25, In: Surface and Coatings Technology. 424, 127657.研究成果: Article › 査読
8 被引用数 (Scopus) -
Machinability exploration for high-entropy alloy FeCrCoMnNi by ultrasonic vibration-assisted diamond turning
Zhang, L., Hashimoto, T. & Yan, J., 2021 1月, In: CIRP Annals. 70, 1, p. 37-40 4 p.研究成果: Article › 査読
12 被引用数 (Scopus) -
Machinability investigation for cellulose nanofiber-reinforced polymer composite by ultraprecision diamond turning
Kamada, Y. & Yan, J., 2021 7月 1, In: International Journal of Automation Technology. 15, 4, p. 475-482 8 p.研究成果: Article › 査読
Open Access -
Microscale Surface Patterning of Zirconia by Femtosecond Pulsed Laser Irradiation
Yamamuro, Y., Shimoyama, T. & Yan, J., 2021, (Accepted/In press) In: International Journal of Precision Engineering and Manufacturing - Green Technology.研究成果: Article › 査読
2 被引用数 (Scopus) -
New evidences for understanding the serrated flow and shear band behavior in nanoindentation of metallic glasses
Huang, H., Jiang, M. & Yan, J., 2021 3月 15, In: Journal of Alloys and Compounds. 857, 157587.研究成果: Article › 査読
7 被引用数 (Scopus) -
One-step fabrication of regular hierarchical micro/nano-structures on glassy carbon by nanosecond pulsed laser irradiation
Wang, C., Huang, H., Qian, Y., Zhang, Z. & Yan, J., 2021 2月, In: Journal of Manufacturing Processes. 62, p. 108-118 11 p.研究成果: Article › 査読
12 被引用数 (Scopus) -
On the transformation between micro-concave and micro-convex in nanosecond laser ablation of a Zr-based metallic glass
Qian, Y., Jiang, M., Zhang, Z., Huang, H. & Yan, J., 2021 8月, In: Journal of Manufacturing Processes. 68, p. 1114-1122 9 p.研究成果: Article › 査読
10 被引用数 (Scopus) -
Softening and hardening on a Zr-based bulk metallic glass induced by nanosecond laser surface melting
Jiao, Y., Brousseau, E., Kosai, K., Lunt, A. J. G., Yan, J., Han, Q., Zhu, H., Bigot, S. & He, W., 2021 1月 28, In: Materials Science and Engineering A. 803, 140497.研究成果: Article › 査読
5 被引用数 (Scopus) -
Surface functionalization of Zr-based metallic glass by direct nanosecond laser texturing
Qian, Y., Jiang, M., Zhang, Z., Huang, H. & Yan, J., 2021 12月, In: Vacuum. 194, 110635.研究成果: Article › 査読
3 被引用数 (Scopus) -
Tribological characteristics of electrical discharge coated layers using quarry dust suspension
Yap, C. Y., Liew, P. J., Othman, I. S. B., Abdollah, M. F. B. & Yan, J., 2021 12月 25, In: Surface and Coatings Technology. 428, 127895.研究成果: Article › 査読
2 被引用数 (Scopus) -
2020
Additive manufacturing of three-dimensional metal-glass functionally gradient material components by laser powder bed fusion with in situ powder mixing
Zhang, X., Chueh, Y. H., Wei, C., Sun, Z., Yan, J. & Li, L., 2020 5月, In: Additive Manufacturing. 33, 101113.研究成果: Article › 査読
28 被引用数 (Scopus) -
Algorithm of Micro-Grooving and Imaging Processing for the Generation of High-Resolution Structural Color Images
Zhou, T., He, Y., Wang, T., Dong, X., Liu, P., Zhao, W., Hu, Y. & Yan, J., 2020 9月 1, In: Nanomanufacturing and Metrology. 3, 3, p. 187-198 12 p.研究成果: Article › 査読
Open Access8 被引用数 (Scopus) -
Direct observation of discharging phenomena in vibration-assisted micro-electrical discharge machining
Shitara, T., Fujita, K. & Yan, J., 2020 5月 1, In: International Journal of Advanced Manufacturing Technology. 108, 4, p. 1125-1138 14 p.研究成果: Article › 査読
8 被引用数 (Scopus) -
Effect of relative tool sharpness on subsurface damage and material recovery in nanometric cutting of mono-crystalline silicon: A molecular dynamics approach
Ameli Kalkhoran, S. N., Vahdati, M. & Yan, J., 2020 3月 15, In: Materials Science in Semiconductor Processing. 108, 104868.研究成果: Article › 査読
19 被引用数 (Scopus)