Jun Komotori

2023

Development of AIH-FPP Carburizing Process Using Carbon Powder

Umeno, G., Hayama, M., Takesue, S., Tomita, T., Kato, T., Misaka, Y. & Komotori, J., 2023, In: Materials Transactions. 64, 2, p. 617-625 9 p.

研究成果: Article › 査読

Open Access

Metallic Vessel with Mesh Culture Surface Fabricated Using Three-dimensional Printing Engineers Tissue Culture Environment

Imashiro, C., Morikura, T., Hayama, M., Ezura, A., Komotori, J., Miyata, S., Sakaguchi, K. & Shimizu, T., 2023 2月, In: Biotechnology and Bioprocess Engineering. 28, 1, p. 181-191 11 p.

研究成果: Article › 査読

1 被引用数 (Scopus)

2022

Effect of atmospheric-controlled induction-heating fine particle peening on microstructure and fatigue properties of low-alloy steel

Takesue, S., Hayama, M. & Komotori, J., 2022 10月, In: Fatigue and Fracture of Engineering Materials and Structures. 45, 10, p. 2908-2919 12 p.

研究成果: Article › 査読

1 被引用数 (Scopus)

Effect of atmospheric-controlled induction-heating fine particle peening on wear resistance and fatigue properties of maraging steel fabricated by laser powder-bed fusion

Takesue, S., Ezura, A., Maki, Y., Hayama, M., Misaka, Y. & Komotori, J., 2022 11月, In: Journal of Materials Research and Technology. 21, p. 373-387 15 p.

研究成果: Article › 査読

Open Access

1 被引用数 (Scopus)

Effect of Room Temperature Fine Particle Peening Pretreatment on Grain Refinement of Fe–Cr Alloys by AIH-FPP

Takesue, S., Kikuchi, S. & Komotori, J., 2022, In: Materials Transactions. 63, 2, p. 203-208 6 p.

研究成果: Article › 査読

Open Access

1 被引用数 (Scopus)

Evaluation of the Compressive Residual Stress Relaxation Behavior by in situ X-ray Stress Measurement

Hayama, M., Kikuchi, S. & Komotori, J., 2022, In: ISIJ International. 62, 4, p. 758-765 8 p.

研究成果: Article › 査読

Open Access

4 被引用数 (Scopus)

Surface modification of titanium alloy via atmospheric pressure nitrogen plasma assisted femtosecond laser irradiation

Katahira, K., Ezura, A., Takesue, S. & Komotori, J., 2022 1月, In: CIRP Annals. 71, 1, p. 469-472 4 p.

研究成果: Article › 査読

Open Access

1 被引用数 (Scopus)

Titanium Culture Vessel Capable of Controlling Culture Temperature for Evaluation of Cell Thermotolerance

Imashiro, C., Ida, Y., Miyata, S. & Komotori, J., 2022, In: Materials Transactions. 63, 3, p. 373-378 6 p.

研究成果: Article › 査読

Open Access

1 被引用数 (Scopus)

浸炭焼入れを施したSCM420H 鋼の疲労過程における残留オーステナイトおよび残留応力の変化挙動

Hayama, M., Maki, Y., Kikuchi, S. & Komotori, J., 2022 11月, In: Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan. 108, 11, p. 891-899 9 p.

研究成果: Article › 査読

Open Access

炭素粉末を用いた AIH-FPP 浸炭プロセスの開発

Umeno, G., Hayama, M., Takesue, S., Tomita, T., Kato, T., Misaka, Y. & Komotori, J., 2022, In: Zairyo/Journal of the Society of Materials Science, Japan. 71, 9, p. 787-794 8 p.

研究成果: Article › 査読

Open Access

2021

Combined effect of gas blow induction heating nitriding and post-treatment with fine particle peening on surface properties and wear resistance of titanium alloy

Takesue, S., Kikuchi, S., Misaka, Y., Morita, T. & Komotori, J., 2021 10月 1, In: Materials Transactions. 62, 10, p. 1502-1509 8 p.

研究成果: Article › 査読

Open Access

2 被引用数 (Scopus)

Development of accurate temperature regulation culture system with metallic culture vessel demonstrates different thermal cytotoxicity in cancer and normal cells

Imashiro, C., Takeshita, H., Morikura, T., Miyata, S., Takemura, K. & Komotori, J., 2021 12月, In: Scientific reports. 11, 1, 21466.

研究成果: Article › 査読

Open Access

8 被引用数 (Scopus)

Effects of particle collision treatments on fatigue strength of TI6AL4V alloy with polishing marks

Morita, T., Miyatani, A., Takesue, S., Kumagai, M. & Komotori, J., 2021 9月 1, In: Materials Transactions. 62, 9, p. 1298-1303 6 p.

研究成果: Article › 査読

Open Access

3 被引用数 (Scopus)

Evaluation of the compressive residual stress relaxation behavior by in situ x-ray stress measurement

Hayama, M., Kikuchi, S. & Komotori, J., 2021 2月 1, In: Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan. 107, 2, p. 137-145 9 p.

研究成果: Article › 査読

Open Access

1 被引用数 (Scopus)

Formation of Fe–Al intermetallic compound layer by AIH-FPP and its effect on tribological properties of stainless steel

Takesue, S., Misaka, Y. & Komotori, J., 2021, In: ISIJ International. 61, 6, p. 1946-1954 9 p.

研究成果: Article › 査読

Open Access

3 被引用数 (Scopus)

Rapid oxynitriding of Ti6Al4V alloy by induction heating in air⁺1

Tamura, K., Takesue, S., Morita, T., Marin, E., Komotori, J., Misaka, Y. & Kumagai, M., 2021 1月 1, In: Materials Transactions. 62, 1, p. 111-117 7 p.

研究成果: Article › 査読

Open Access

3 被引用数 (Scopus)

Titanium culture vessel capable of controlling culture temperature for evaluation of cell thermotolerance

Imashiro, C., Ida, Y., Miyata, S. & Komotori, J., 2021, In: Zairyo/Journal of the Society of Materials Science, Japan. 70, 6, p. 479-485 7 p.

研究成果: Article › 査読

Open Access

2020

Characterization of surface layer formed by gas blow induction heating nitriding at different temperatures and its effect on the fatigue properties of titanium alloy

Takesue, S., Kikuchi, S., Akebono, H., Morita, T. & Komotori, J., 2020 3月, In: Results in Materials. 5, 100071.

研究成果: Article › 査読

Open Access

14 被引用数 (Scopus)

Effects of particle collision treatments on fatigue strength of Ti-6Al-4V alloy with polishing marks

Morita, T., Miyatani, A., Takesue, S., Kumagai, M. & Komotori, J., 2020 12月 15, In: Zairyo/Journal of the Society of Materials Science, Japan. 69, 12, p. 915-920 6 p.

研究成果: Article › 査読

Open Access

1 被引用数 (Scopus)

Generation of biocompatible titanium alloy surfaces including calcium and phosphorus elements by laser-induced mist spraying wet treatment

Ezura, A., Katahira, K. & Komotori, J., 2020, In: International Journal of Automation Technology. 14, 4, p. 575-581 7 p.

研究成果: Article › 査読

Open Access

Influences of particle collision treatments on surface characteristics and fatigue strength of Ti-6Al-4V alloy

Morita, T., Miyatani, A., Kariya, S., Kumagai, M., Takesue, S. & Komotori, J., 2020 9月, In: Results in Materials. 7, 100128.

研究成果: Article › 査読

Open Access

9 被引用数 (Scopus)

Rapid nitriding mechanism of titanium alloy by gas blow induction heating

Takesue, S., Kikuchi, S., Misaka, Y., Morita, T. & Komotori, J., 2020 10月 15, In: Surface and Coatings Technology. 399, 126160.

研究成果: Article › 査読

13 被引用数 (Scopus)

大気中での高周波誘導加熱による Ti-6Al-4V 合金の高速酸窒化処理

Tamura, K., Takesue, S., Morita, T., Marin, E., Komotori, J., Misaka, Y. & Kumagai, M., 2020 8月 15, In: Zairyo/Journal of the Society of Materials Science, Japan. 69, 8, p. 605-611 7 p.

研究成果: Article › 査読

Open Access

1 被引用数 (Scopus)

2019

Effect of hydroxy groups and microtopography generated by a nanosecond-pulsed laser on pure Ti surfaces

Kurashina, Y., Ezura, A., Murakami, R., Mizutani, M. & Komotori, J., 2019 5月 1, In: Journal of Materials Science: Materials in Medicine. 30, 5, 57.

研究成果: Article › 査読

10 被引用数 (Scopus)

Effect of pre-treatment with fine particle peening on surface properties and wear resistance of gas blow induction heating nitrided titanium alloy

Takesue, S., Kikuchi, S., Akebono, H., Misaka, Y. & Komotori, J., 2019 2月 15, In: Surface and Coatings Technology. 359, p. 476-484 9 p.

研究成果: Article › 査読

32 被引用数 (Scopus)

Functionalisation of titanium alloy surface through oxygen gas jet-assisted gliding arc discharge plasma

Katahira, K., Mifune, N. & Komotori, J., 2019, In: CIRP Annals. 68, 1, p. 201-204 4 p.

研究成果: Article › 査読

2018

Dynamic recrystallization of Fe-Cr alloys by atmospheric-controlled induction-heating fine particle peening

Kikuchi, S., Tanaka, I., Takesue, S., Komotori, J. & Matsumoto, K., 2018 6月 25, In: Surface and Coatings Technology. 344, p. 410-417 8 p.

研究成果: Article › 査読

4 被引用数 (Scopus)

Effect of atmospheric-controlled induction-heating fine particle peening on electrochemical characteristics of austenitic stainless steel

Kikuchi, S., Iwamae, S., Akebono, H., Komotori, J. & Kadota, K., 2018 1月 25, In: Surface and Coatings Technology. 334, p. 189-195 7 p.

研究成果: Article › 査読

18 被引用数 (Scopus)

Effect of Cr diffused layer formed by AIH-FPP treatment on adhesion of DLC films to a carbon steel substrate

Takesue, S., Akebono, H., Furukawa, M., Kikuchi, S., Komotori, J. & Nomura, H., 2018, In: Materials Transactions. 59, 4, p. 642-647 6 p.

研究成果: Article › 査読

2 被引用数 (Scopus)

Formation of titanium/zirconia based biomaterial fabricated by spark plasma sintering

Kikuchi, S., Katahira, K. & Komotori, J., 2018, In: Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 82, 9, p. 341-348 8 p.

研究成果: Article › 査読

7 被引用数 (Scopus)

Improvement of the electrochemical characteristics of medium carbon steel using atmospheric-controlled induction-heating fine particle peening

Kikuchi, S., Iwamae, S., Akebono, H., Komotori, J. & Misaka, Y., 2018 11月 25, In: Surface and Coatings Technology. 354, p. 76-82 7 p.

研究成果: Article › 査読

8 被引用数 (Scopus)

Rapid surface nitriding of titanium alloy by a nanosecond fiber laser under atmospheric conditions

Katahira, K., Tanida, Y., Takesue, S. & Komotori, J., 2018 1月 1, In: CIRP Annals. 67, 1, p. 563-566 4 p.

研究成果: Article › 査読

16 被引用数 (Scopus)

Surface properties of intermetallic compound layer formed on titanium alloy by AIH-FPP (Atmospheric controlled induction heating fine particle peening) treatment⁺1

Takesue, S., Saito, S., Komotori, J., Misaka, Y. & Kawasaki, K., 2018, In: Materials Transactions. 59, 9, p. 1452-1457 6 p.

研究成果: Article › 査読

Open Access

5 被引用数 (Scopus)

2017

Effect of cooling stimulus on collection efficiency of calf chondrocytes cultivated on metal surface

Kurashina, Y., Miyata, S. & Komotori, J., 2017 11月, In: International Journal of Automation Technology. 11, 6, p. 925-931 7 p., ijate001100060925.

研究成果: Article › 査読

Open Access

1 被引用数 (Scopus)

Effect of Cr diffused layer formed by AIH-FPP on adhesion strength of DLC films

Takesue, S., Akebono, H., Furukawa, M., Kikuchi, S., Komotori, J. & Nomura, H., 2017, In: Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 81, 7, p. 352-357 6 p.

研究成果: Article › 査読

Effects of gas blow velocity on the surface properties of Ti-6Al-4V alloy treated by gas blow IH nitriding

Takesue, S., Kikuchi, S., Akebono, H., Komotori, J., Fukazawa, K. & Misaka, Y., 2017, In: Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 81, 5, p. 288-293 6 p.

研究成果: Article › 査読

Open Access

Effects of gas blow velocity on the surface properties of Ti-6Al-4V alloy treated by gas blow IH nitriding

Takesue, S., Kikuchi, S., Akebono, H., Komotori, J., Fukazawa, K. & Misaka, Y., 2017, In: Materials Transactions. 58, 8, p. 1155-1160 6 p.

研究成果: Article › 査読

Open Access

14 被引用数 (Scopus)

Efficient Subculture Process for Adherent Cells by Selective Collection Using Cultivation Substrate Vibration

Kurashina, Y., Takemura, K., Friend, J., Miyata, S. & Komotori, J., 2017 3月, In: IEEE Transactions on Biomedical Engineering. 64, 3, p. 580-587 8 p., 7469399.

研究成果: Article › 査読

14 被引用数 (Scopus)

Enzyme-free cell detachment mediated by resonance vibration with temperature modulation

Kurashina, Y., Hirano, M., Imashiro, C., Totani, K., Komotori, J. & Takemura, K., 2017 10月, In: Biotechnology and bioengineering. 114, 10, p. 2279-2288 10 p.

研究成果: Article › 査読

22 被引用数 (Scopus)

Experimental investigation of machinability and surface quality of sapphire machined with polycrystalline diamond micro-milling tool

Katahira, K., Matsumoto, Y., Komotori, J. & Yamazaki, K., 2017 12月 1, In: International Journal of Advanced Manufacturing Technology. 93, 9-12, p. 4389-4398 10 p.

研究成果: Article › 査読

9 被引用数 (Scopus)

Formation of a TiAl₃ layer by an AIH-FPP treatment using mechanically milled particles and its wear resistance

Saito, S., Takesue, S., Komotori, J., Fukazawa, K. & Misaka, Y., 2017, In: Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 81, 6, p. 295-300 6 p.

研究成果: Article › 査読

Open Access

2 被引用数 (Scopus)

Generation of biocompatible TiO₂ layer using atmospheric pressure plasma-assisted fine particle peening

Katahira, K., Mifune, N. & Komotori, J., 2017, (Accepted/In press) In: CIRP Annals - Manufacturing Technology.

研究成果: Article › 査読

2 被引用数 (Scopus)

Recent trends of fatigue research III: Effect of surface modification using fine particle peening on the fatigue properties of metallic materials

Kikuchi, S. & Komotori, J., 2017 7月, In: Zairyo/Journal of the Society of Materials Science, Japan. 66, 7, p. 535-541 7 p.

研究成果: Article › 査読

Open Access

6 被引用数 (Scopus)

Surface modification of stainless steel by laser-induced wet treatment in aluminum nitrate solution

Ezura, A., Yoshimine, H., Katahira, K. & Komotori, J., 2017, In: Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 83, 1, p. 72-77 6 p.

研究成果: Article › 査読

Open Access

1 被引用数 (Scopus)

2016

Bone and gingival connective tissue responses towards nanosecond-pulsed laser-treated titanium implants

Fukayo, Y., Amemiya, T., Nakaoka, K., Mizutani, M., Komotori, J., Hamada, Y. & Hayakawa, T., 2016 4月 12, In: Journal of Hard Tissue Biology. 25, 2, p. 181-194 14 p.

研究成果: Article › 査読