年別の研究成果
年別の研究成果
検索結果
-
?The Applicability of the Manson-Coffin Law and Miner's Law to Extremely Low Cycle Fatigue
Shimada, K., Komotori, J. & Shimizu, M., 1987, In: Transactions of the Japan Society of Mechanical Engineers Series A. 53, 491, p. 1178-1185 8 p.研究成果: Article › 査読
Open Access32 被引用数 (Scopus) -
A crystallographic examination of fracture mechanism in low cycle fatigue of pure iron at low temperature
Xia, D., Komotori, J. & Shimizu, M., 1998, In: Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A. 64, 621, p. 1211-1214 4 p.研究成果: Article › 査読
Open Access -
Adhesion of osteoblast-like cells on nanostructured hydroxyapatite
Okada, S., Ito, H., Nagai, A., Komotori, J. & Imai, H., 2010 2, In: Acta Biomaterialia. 6, 2, p. 591-597 7 p.研究成果: Article › 査読
103 被引用数 (Scopus) -
Analysis of pneumatic fine particle peening process by using a high-speed-camera
Ito, T., Kikuchi, S., Hirota, Y., Sasago, A. & Komotori, J., 2010 6 30, In: International Journal of Modern Physics B. 24, 15-16, p. 3047-3052 6 p.研究成果: Article › 査読
15 被引用数 (Scopus) -
Analysis of the structure and bioactivity on SiO2 film cured from perhydropolysilazane
Haze, M., Kamide, A., Komotori, J., Senna, M., Imai, H. & Shindo, T., 2008 2, In: Zairyo/Journal of the Society of Materials Science, Japan. 57, 2, p. 174-180 7 p.研究成果: Article › 査読
1 被引用数 (Scopus) -
A new fracture mechanics model for multiple matrix cracks of SiC fiber reinforced brittle-matrix composites
Okabe, T., Takeda, N., Komotori, J., Shimizu, M. & Curtin, W. A., 1999 11 26, In: Acta Materialia. 47, 17, p. 4299-4309 11 p.研究成果: Article › 査読
23 被引用数 (Scopus) -
A study of fatigue fracture properties of high strength steel in high and extremely high cycle fatigue regions based on experimental and simulation methods
Fukazawa, K., Okabe, T., Komotori, J. & Shimizu, M., 2003 3, In: Nippon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A. 69, 3, p. 617-625 9 p.研究成果: Article › 査読
Open Access -
A study on delamination behavior of coating thermally sprayed with Ni-based self-fluxing alloy under fatigue loadings
Akebono, H., Nishimori, H., Komotori, J. & Shimizu, M., 2007 1, In: Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A. 73, 1, p. 96-101 6 p.研究成果: Article › 査読
Open Access1 被引用数 (Scopus) -
A study on PCD tool surface reconditioning technique for SiC micromachining
Takesue, S., Katahira, K. & Komotori, J., 2014, In: Procedia CIRP. 14, p. 355-359 5 p.研究成果: Article › 査読
Open Access8 被引用数 (Scopus) -
Barnacle settlement behavior on controled micro-textured surfaces
Horiuchi, R., Kobayashi, S., Kameyama, Y., Mizutani, M., Komotori, J. & Katsuyama, I., 2009, In: Zairyo to Kankyo/ Corrosion Engineering. 58, 8, p. 302-307 6 p.研究成果: Article › 査読
1 被引用数 (Scopus) -
Bone and gingival connective tissue responses towards nanosecond-pulsed laser-treated titanium implants
Fukayo, Y., Amemiya, T., Nakaoka, K., Mizutani, M., Komotori, J., Hamada, Y. & Hayakawa, T., 2016 4 12, In: Journal of Hard Tissue Biology. 25, 2, p. 181-194 14 p.研究成果: Article › 査読
9 被引用数 (Scopus) -
Cell compatibility of Co-Cr-Mo alloy treated with electrolytic in-process dressing grinding/thermal oxidation hybrid process
Hiraga, I., Hamada, M., Komotori, J. & Mizutani, M., 2013, In: International Journal of Nanomanufacturing. 9, 5-6, p. 486-495 10 p.研究成果: Article › 査読
-
Combined effect of gas blow induction heating nitriding and post-treatment with fine particle peening on surface properties and wear resistance of titanium alloy
Takesue, S., Kikuchi, S., Misaka, Y., Morita, T. & Komotori, J., 2021 10 1, In: Materials Transactions. 62, 10, p. 1502-1509 8 p.研究成果: Article › 査読
-
Consideration on dominant factors for extremely low cycle fatigue properties
Kuroda, M., Yamanaka, S., Komotori, J. & Shimizu, M., 1999 10 15, In: Technology Reports of the Osaka University. 49, 2348, p. 147-154 8 p.研究成果: Article › 査読
3 被引用数 (Scopus) -
Control of cellular activity of fibroblasts on size-tuned fibrous hydroxyapatite nanocrystals
Okada, S., Nagai, A., Oaki, Y., Komotori, J. & Imai, H., 2011 3, In: Acta Biomaterialia. 7, 3, p. 1290-1297 8 p.研究成果: Article › 査読
25 被引用数 (Scopus) -
Control of cellular activity of osteoblastic cells with microtopography of biphasic calcium phosphate scaffolds
Okada, S., Oaki, Y., Komotori, J. & Imai, H., 2011 8, In: Journal of the Ceramic Society of Japan. 119, 1392, p. 635-639 5 p.研究成果: Article › 査読
Open Access2 被引用数 (Scopus) -
Control of surface modified layer on metallic biomaterials by an advanced ELID grinding system (EG-X)
Mizutani, M., Komotori, J., Katahira, K. & Ohmori, H., 2006 10 30, In: International Journal of Modern Physics B. 20, 25-27, p. 3605-3610 6 p.研究成果: Article › 査読
4 被引用数 (Scopus) -
Corrosion response of stainless steel (SUS316) ground by ELID (Electrolytic In-Process Dressing) grinding method
Mizutani, M., Komotori, J., Nagata, J., Katahira, K. & Ohmori, H., 2005 11, In: Zairyo/Journal of the Society of Materials Science, Japan. 54, 11, p. 1178-1183 6 p.研究成果: Article › 査読
-
Corrosion response of surface engineered titanium alloys damaged by prior abrasion
Komotori, J., Lee, B. J., Dong, H. & Dearnley, P. A., 2001 10, In: WEAR. 250, 251, p. 1239-1249 11 p.研究成果: Article › 査読
78 被引用数 (Scopus) -
Creation of fine grained-layer and high hardness-layer using IH-FPP treatment system and its effect on the fatigue properties of steel
Harada, T., Kikuchi, S., Komotori, J., Fukazawa, K., Misaka, Y. & Kawasaki, K., 2011 12, In: Zairyo/Journal of the Society of Materials Science, Japan. 60, 12, p. 1091-1096 6 p.研究成果: Article › 査読
8 被引用数 (Scopus) -
Creation of high-performance surface by ELID (Electrolytic In-Process Dressing) grinding - Formation of corrosion resistant oxide film
Komotori, J., Mizutani, M., Ohmori, H. & Katahira, K., 2005 10 14, In: Toraibarojisuto/Journal of Japanese Society of Tribologists. 50, 8, p. 584-589 6 p.研究成果: Article › 査読
-
Damage process of unidirectional SiC fiber reinforced glass-matrix composites
Okabe, T., Takeda, N., Imai, K., Komotori, J., Shimizu, M. & Imai, Y., 1998, In: Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A. 64, 628, p. 2931-2937 7 p.研究成果: Article › 査読
Open Access -
Damage process of unidirectional sic fiber reinforced glass-matrix cross-ply laminates
Okabe, T., Takeda, N., Imai, K., Komotori, J., Shimizu, M. & Imai, Y., 1999, In: Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A. 65, 631, p. 621-627 7 p.研究成果: Article › 査読
Open Access -
Development of accurate temperature regulation culture system with metallic culture vessel demonstrates different thermal cytotoxicity in cancer and normal cells
Imashiro, C., Takeshita, H., Morikura, T., Miyata, S., Takemura, K. & Komotori, J., 2021 12, In: Scientific reports. 11, 1, 21466.研究成果: Article › 査読
Open Access -
Development of an atmospheric controlled IH-FPP treatment system and its application to structural steel
Ito, T., Kikuchi, S., Kameyama, Y., Komotori, J., Fukazawa, K., Misaka, Y. & Kawasaki, K., 2010 8, In: Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 74, 8, p. 533-539 7 p.研究成果: Article › 査読
17 被引用数 (Scopus) -
Development of a new grinding system for finishing of hemispherical inside surface
Kotani, H., Komotori, J., Naruse, T., Mizutani, M., Katahira, K., Ohmori, H., Wasa, M. & Sumiya, K., 2013, In: International Journal of Nanomanufacturing. 9, 1, p. 77-86 10 p.研究成果: Article › 査読
3 被引用数 (Scopus) -
Development of IH-FPP processing system by induction heating and surface modification of S45C steel
Sasago, A., Kikuchi, S., Kameyama, Y., Komotori, J., Fukazawa, K., Misaka, Y. & Kawasaki, K., 2008 5, In: Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 72, 5, p. 347-352 6 p.研究成果: Article › 査読
18 被引用数 (Scopus) -
Dynamic recrystallization of Fe-Cr alloys by atmospheric-controlled induction-heating fine particle peening
Kikuchi, S., Tanaka, I., Takesue, S., Komotori, J. & Matsumoto, K., 2018 6 25, In: Surface and Coatings Technology. 344, p. 410-417 8 p.研究成果: Article › 査読
1 被引用数 (Scopus) -
Effective cell collection method using collagenase and ultrasonic vibration
Kurashina, Y., Takemura, K., Miyata, S., Komotori, J. & Koyama, T., 2014 10 1, In: Biomicrofluidics. 8, 5, 054118.研究成果: Article › 査読
12 被引用数 (Scopus) -
Effective fusing method to achieve thermally sprayed steel with ni-based self-fluxing alloy which indicate high fatigue properties
Akebono, H., Komotori, J. & Shimizu, M., 2010 7, In: Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A. 76, 767, p. 839-845 7 p.研究成果: Article › 査読
Open Access -
Effect of atmospheric-controlled induction-heating fine particle peening on electrochemical characteristics of austenitic stainless steel
Kikuchi, S., Iwamae, S., Akebono, H., Komotori, J. & Kadota, K., 2018 1 25, In: Surface and Coatings Technology. 334, p. 189-195 7 p.研究成果: Article › 査読
14 被引用数 (Scopus) -
Effect of atmospheric-pressure plasma jet on polycrystalline diamond micro-milling of silicon carbide
Katahira, K., Ohmori, H., Takesue, S., Komotori, J. & Yamazaki, K., 2015, In: CIRP Annals - Manufacturing Technology. 64, 1, p. 129-132 4 p.研究成果: Article › 査読
31 被引用数 (Scopus) -
Effect of coating microstructure on the fatigue properties of steel thermally sprayed with Ni-based self-fluxing alloy
Akebono, H., Komotori, J. & Shimizu, M., 2008 5, In: International Journal of Fatigue. 30, 5, p. 814-821 8 p.研究成果: Article › 査読
22 被引用数 (Scopus) -
Effect of complex stimuli of shear stress and surface modification on proliferation and phenotype of chondrocyte
Nakai, S., Miyata, S. & Komotori, J., 2015 6 1, In: Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 79, 6, p. 324-329 6 p.研究成果: Article › 査読
2 被引用数 (Scopus) -
Effect of cooling stimulus on collection efficiency of calf chondrocytes cultivated on metal surface
Kurashina, Y., Miyata, S. & Komotori, J., 2017 11, In: International Journal of Automation Technology. 11, 6, p. 925-931 7 p., ijate001100060925.研究成果: Article › 査読
1 被引用数 (Scopus) -
Effect of Cr diffused layer formed by AIH-FPP on adhesion strength of DLC films
Takesue, S., Akebono, H., Furukawa, M., Kikuchi, S., Komotori, J. & Nomura, H., 2017, In: Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 81, 7, p. 352-357 6 p.研究成果: Article › 査読
-
Effect of Cr diffused layer formed by AIH-FPP treatment on adhesion of DLC films to a carbon steel substrate
Takesue, S., Akebono, H., Furukawa, M., Kikuchi, S., Komotori, J. & Nomura, H., 2018, In: Materials Transactions. 59, 4, p. 642-647 6 p.研究成果: Article › 査読
2 被引用数 (Scopus) -
Effect of ELID Grinding on corrosion response of metallic biomaterials (Ti-6Al-4V alloy)
Mizutani, M., Komotori, J., Katahira, K., Watanabe, Y. & Ohmori, H., 2003, In: Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 69, 12, p. 1744-1748 5 p.研究成果: Article › 査読
Open Access2 被引用数 (Scopus) -
Effect of fine particle bombardment temperature on the surface characteristics of Ti-6Al-4V alloy
Kameyama, Y. & Komotori, J., 2006 10 30, In: International Journal of Modern Physics B. 20, 25-27, p. 3698-3703 6 p.研究成果: Article › 査読
-
Effect of fine particle bombardment treatment on tribological properties and adhesion of DLC film coated on SCM440 steel
Kameyama, Y., Niwa, A. & Komotori, J., 2007 5, In: Zairyo/Journal of the Society of Materials Science, Japan. 56, 5, p. 453-459 7 p.研究成果: Article › 査読
2 被引用数 (Scopus) -
Effect of fine particle peening on atmospheric oxidation behavior of Ti-6Al-4V alloy
Kikuchi, S. & Komotori, J., 2016, In: Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 80, 2, p. 114-120 7 p.研究成果: Article › 査読
12 被引用数 (Scopus) -
Effect of fracture mechanism on low-cycle fatigue life of pure iron and low temperature
Xia, D., Komotori, J. & Shimizu, M., 1997, In: Nippon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A. 63, 608, p. 665-668 4 p.研究成果: Article › 査読
Open Access -
Effect of hydroxy groups and microtopography generated by a nanosecond-pulsed laser on pure Ti surfaces
Kurashina, Y., Ezura, A., Murakami, R., Mizutani, M. & Komotori, J., 2019 5 1, In: Journal of Materials Science: Materials in Medicine. 30, 5, 57.研究成果: Article › 査読
7 被引用数 (Scopus) -
Effect of micro ploughing during fine particle peening process on the microstructure of metallic materials
Kameyama, Y. & Komotori, J., 2009 11 19, In: Journal of Materials Processing Technology. 209, 20, p. 6146-6155 10 p.研究成果: Article › 査読
52 被引用数 (Scopus) -
Effect of pre-treatment with fine particle peening on surface properties and wear resistance of gas blow induction heating nitrided titanium alloy
Takesue, S., Kikuchi, S., Akebono, H., Misaka, Y. & Komotori, J., 2019 2 15, In: Surface and Coatings Technology. 359, p. 476-484 9 p.研究成果: Article › 査読
17 被引用数 (Scopus) -
Effect of Repeated Annealing on the Fatigue Life in Extremely Low Cycle Fatigue
Hongo, H., Komotori, J. & Shimizu, M., 1989, In: Transactions of the Japan Society of Mechanical Engineers Series A. 55, 520, p. 2397-2401 5 p.研究成果: Article › 査読
Open Access -
Effect of shot particle on the mechanism of creating a modified layer by atmospheric controlled IH-FPP treatment
Fukuoka, T., Kikuchi, S., Komotori, J., Fukazawa, K., Misaka, Y. & Kawasaki, K., 2011 7, In: Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 75, 7, p. 372-378 7 p.研究成果: Article › 査読
12 被引用数 (Scopus) -
Effect of simultaneous surface modification process on wear resistance of martensitic stainless steel
Kikuchi, S., Sasago, A. & Komotori, J., 2009 11 19, In: Journal of Materials Processing Technology. 209, 20, p. 6156-6160 5 p.研究成果: Article › 査読
17 被引用数 (Scopus) -
Effect of specimen hardness and shot particle hardness on residual stress and fatigue properties of SCM435H steel performed by fine particle peening
Kikuchi, S., Hirota, Y. & Komotori, J., 2010 6, In: Zairyo/Journal of the Society of Materials Science, Japan. 60, 6, p. 547-553 7 p.研究成果: Article › 査読
9 被引用数 (Scopus) -
Effect of surface character on proliferation and adhesion of l929 fibroblast
Nagat, A., Miyata, S., Saito, M., Komotori, J., Obi, S., Naiviba, Y. & Koyaivia, T., 2011 12 1, In: Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A. 77, 775, p. 544-551 8 p.研究成果: Article › 査読
3 被引用数 (Scopus)