16 QAM digital modem for indoor wireless packet communications

Tomoaki Ishifuji, Gen'ichi Ishii, Shuichi Adachi

研究成果: Paper査読

1 被引用数 (Scopus)

抄録

This paper describes a 16-ary Quadrature Amplitude Modulation (16 QAM) digital modem for 4 Mbps wireless LANs on the 2.4-GHz Industrial, Scientific, and Medical (ISM) band and the results of the simulations of frame error characteristics. Because the demand for land mobile communications is increasing rapidly, multi-level modulations have recently been drawing much attention. Although some field experiments using 16 QAM and Time Division Multiple Access (TDMA) have been made and some applications were proposed [1], we have concluded that 16 QAM is suitable to be used for indoor communications because the delay spreads and the maximum Doppler frequencies in indoor environments are generally smaller than those in the outdoor environments. Consequently, we have designed this modem for use of wireless LANs on the ISM band which is one of the applications of indoor communications. From the simulations, we found that the frame error rate vs. signal to noise ratio curve of this modem was about 3 dB degraded compared with the theoretical one.

本文言語English
ページ818-821
ページ数4
出版ステータスPublished - 1996 1 1
外部発表はい
イベントProceedings of the 1996 5th IEEE International Conference on Universal Personal Communications, ICUPC'96. Part 1 (of 2) - Cambridge, MA, USA
継続期間: 1996 9 291996 10 1

Other

OtherProceedings of the 1996 5th IEEE International Conference on Universal Personal Communications, ICUPC'96. Part 1 (of 2)
CityCambridge, MA, USA
Period96/9/2996/10/1

ASJC Scopus subject areas

  • ハードウェアとアーキテクチャ

フィンガープリント

「16 QAM digital modem for indoor wireless packet communications」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル