4 × 10 Gbit/s full-duplex optical link with compact optical sub-assemblies and thin GI 50/125 plastic optical fibre ribbon

N. Schlepple, M. Nishigaki, H. Uemura, H. Furuyama, Y. Sugizaki, H. Shibata, Y. Koike

研究成果: Article査読

抄録

A full-duplex data link at 10 Gbit/s per channel (two upstream and two downstream) between two compact bidirectional optical sub-assemblies is presented. Each sub-assembly is based on the authors' optoelectronic ferrule and carries both laser diodes and photodiodes while maintaining a compact form factor of less than 20 mm3. The authors use plastic optical fibres with 50 μm graded-index cores and thin 125 μm claddings bundled in a four-channel ribbon but split the ribbon in order to reach both laser diodes and photodiodes within the optoelectronic ferrule, hence directly butt-coupling each channel with its own optical fibre. This method keeps both assembly form factor and complexity at a minimum and performance high. Eventually error-free signal transmission at 10 Gbit/s per channel over 5 m with 0.67 unit intervals eye opening is confirmed.

本文言語English
ページ(範囲)835-836
ページ数2
ジャーナルElectronics Letters
49
13
DOI
出版ステータスPublished - 2013 6 20

ASJC Scopus subject areas

  • 電子工学および電気工学

フィンガープリント

「4 × 10 Gbit/s full-duplex optical link with compact optical sub-assemblies and thin GI 50/125 plastic optical fibre ribbon」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル