A 200-GHz spacing, 17-channel, 1×2 wavelength selective switch using a silicon arrayed-waveguide grating with loopback

Hideaki Asakura, Takemasa Yoshida, Hiroyuki Tsuda, Keijiro Suzuki, Ken Tanizawa, Munehiro Toyama, Minoru Ohtsuka, Nobuyuki Yokoyama, Kazuyuki Matsumaro, Miyoshi Seki, Keiji Koshino, Kazuhiro Ikeda, Shu Namiki, Hitoshi Kawashima

    研究成果: Conference contribution

    5 被引用数 (Scopus)

    抄録

    A 200-GHz spacing, 17-channel, 1×2 wavelength selective switch was fabricated using silicon wire waveguides. An arrayed-waveguide grating with loopback is used to configure the 1×2 wavelength selective switch. The chip size was only 2.8 mm × 6.5 mm. The minimum and the maximum losses of the wavelength selective switch were 21 dB and 26 dB, respectively. The minimum and the maximum crosstalks were -21 dB and -2 dB, respectively.

    本文言語English
    ホスト出版物のタイトル2015 International Conference on Photonics in Switching, PS 2015
    出版社Institute of Electrical and Electronics Engineers Inc.
    ページ52-54
    ページ数3
    ISBN(印刷版)9781479988211
    DOI
    出版ステータスPublished - 2015 11 13
    イベントInternational Conference on Photonics in Switching, PS 2015 - Florence, Italy
    継続期間: 2015 9 222015 9 25

    Other

    OtherInternational Conference on Photonics in Switching, PS 2015
    CountryItaly
    CityFlorence
    Period15/9/2215/9/25

    ASJC Scopus subject areas

    • Electrical and Electronic Engineering

    フィンガープリント 「A 200-GHz spacing, 17-channel, 1×2 wavelength selective switch using a silicon arrayed-waveguide grating with loopback」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

    引用スタイル