A Parallel Algorithm for Channel Routing Problems

Nobuo Funabiki, Nobuo Funabiki, Yoshiyasu Takefuji

研究成果: Article査読

20 被引用数 (Scopus)

抄録

A parallel algorithm for channel routing problems is presented in this paper. The channel routing problem is very important in the automatic layout design of VLSI circuits and printed circuit boards. The problem is to route the given interconnections between two rows of terminals on a multilayer channel where the channel area must be minimized. Although several algorithms have been proposed for two-layer problems, two-Iayer-and-over-the-cell problems, and three-layer problems, the current advancement of VLSI chip technology allows us to use four layers composed of two metal layers and two polysilicon layers for routing in a chip. The goal of the proposed parallel algorithm is to find the near-optimum routing solution for the given interconnections in a short time. The algorithm is applied for the four-layer channel routing problems where it requires n × m × 2 processing elements for the n-netm-track problem. The algorithm has three advantages over the conventional algorithms: 1) it can be easily modified for accommodating more than four-layer problems, 2) it runs not only on a sequential machine but also on a parallel machine with maximally n ×m × 2 processors, and 3) the program size is very small. The algorithm is verified by solving seven benchmark problems where the algorithm finds routing solutions in a nearly constant time with n × m × 2 processors.

本文言語English
ページ(範囲)464-474
ページ数11
ジャーナルIEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems
11
4
DOI
出版ステータスPublished - 1992 4月
外部発表はい

ASJC Scopus subject areas

  • ソフトウェア
  • コンピュータ グラフィックスおよびコンピュータ支援設計
  • 電子工学および電気工学

フィンガープリント

「A Parallel Algorithm for Channel Routing Problems」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル