A study on grinding performance of CBN grains. (2nd report). Wear characteristics.

M. Takahashi, A. Ishimura, T. Aoyama, I. Inasaki, J. Sato

研究成果: Article査読

1 被引用数 (Scopus)

抄録

Wear characteristics of monocrystalline and sintered CBN grains were experimentally studied. Two different kinds of wear tests were carried out, i.e. continuous wear test and cluster overcut fly grinding test. It was confirmed through the wear tests that there was considerable difference in the wear characteristics among CBN grains, depending on the difference in manufacturing processes and that the wear process of CBN grains was considerably affected by micro fracture of grain edges. Grinding performance of CBN grains were evaluated using the toughness and the wear performance measured in this series of tests. (English abstract)

本文言語English
ページ(範囲)922-925
ページ数4
ジャーナルJ. JAPAN SOC. PRECIS. ENGNG.
50
6 , Jun. 1984
出版ステータスPublished - 1984 1 1
外部発表はい

ASJC Scopus subject areas

  • 機械工学

フィンガープリント

「A study on grinding performance of CBN grains. (2nd report). Wear characteristics.」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル