An approach for heat flux sensor-less heat inflow estimation based on distributed parameter system of Peltier device

Hidetaka Morimitsu, Eiichi Saito, Seiichiro Katsura

研究成果: Conference contribution

3 被引用数 (Scopus)

抄録

Peltier device has recently been attracting attention as a suitable device to produce thermal sensation. For the information obtainment of the heat exchanged between the device and external environment, heat flux sensor is generally utilized. However, heat flux sensor has drawbacks from the viewpoints of thermal capacitance and cost compared with temperature sensor. In order to address the problems, heat flux sensor-less estimation method of the heat flow should be developed. This research focuses on the distributed parameter system of Peltier device, and constructs a heat inflow observer based on the system. The derived model has the infinite number of poles and zeros, and the observer is approximated with the consideration on the poles and zeros for the simplicity in implementation. As shown in the experiments, the proposed observer shows its capacity of estimating heat inflow without using a heat flux sensor.

本文言語English
ホスト出版物のタイトルProceedings
ホスト出版物のサブタイトルIECON 2011 - 37th Annual Conference of the IEEE Industrial Electronics Society
ページ4214-4219
ページ数6
DOI
出版ステータスPublished - 2011 12 1
イベント37th Annual Conference of the IEEE Industrial Electronics Society, IECON 2011 - Melbourne, VIC, Australia
継続期間: 2011 11 72011 11 10

出版物シリーズ

名前IECON Proceedings (Industrial Electronics Conference)

Other

Other37th Annual Conference of the IEEE Industrial Electronics Society, IECON 2011
国/地域Australia
CityMelbourne, VIC
Period11/11/711/11/10

ASJC Scopus subject areas

  • 制御およびシステム工学
  • 電子工学および電気工学

フィンガープリント

「An approach for heat flux sensor-less heat inflow estimation based on distributed parameter system of Peltier device」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル