An experimental validation of flexible actuator with thrust-rotational wire

Kei Mikami, Yusuke Kasahara, Kohei Ohnishi

研究成果: Paper査読

抄録

Flexible actuator, which is able to separate an end effector and an actuator, is developed for weight saving and miniaturization of robotic end effector. Flexible actuator consists of a flexible wire and a motor. This system is expected to be utilized for haptic motion with bilateral control. Flexible actuator with bilateral control is able to transmit position/force or angular/torque information to operator on remote control. However, the flexible actuators have been developed only for the rotational motion or only for the translational motion. This time, we developed two type wires that are able to transmit rotational and translational motion. In this paper, "thrust-rotation wire" which transmit rotational and translation motion were developed and characteristics of position/force and angular/torque transmissions of that were verified and both type were compared.

本文言語English
ページ3053-3058
ページ数6
DOI
出版ステータスPublished - 2009 12月 1
イベント35th Annual Conference of the IEEE Industrial Electronics Society, IECON 2009 - Porto, Portugal
継続期間: 2009 11月 32009 11月 5

Other

Other35th Annual Conference of the IEEE Industrial Electronics Society, IECON 2009
国/地域Portugal
CityPorto
Period09/11/309/11/5

ASJC Scopus subject areas

  • 制御およびシステム工学
  • 電子工学および電気工学

フィンガープリント

「An experimental validation of flexible actuator with thrust-rotational wire」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル