An investigation of measurement condition for non-intrusive velocity determination based on thermal tracing by Raman imaging

Reiko Kuriyama, Yohei Sato

研究成果: Article

抄録

The present study proposes a velocity measurement based on thermal tracing by Raman imaging and investigates its applicability focusing on the error in temperature measurement, towards the establishment of a non-intrusive and micro-scale velocimetry. In order to realize fluorescence-free measurement, two-wavelength Raman imaging was employed to measure the temperature field in a channel flow. This technique exploits the contrasting temperature dependencies of hydrogen-bonded (HB) and non-hydrogen-bonded (NHB) OH stretching Raman bands of liquid water, and enables the determination of planar temperature distributions from the intensity ratio of the HB to NHB images. A calibration experiment showed a linear relationship between the temperature and the Raman intensity ratio in the range 293−333 K with temperature sensitivity of −0.56% K-1. It was also confirmed that the spatial variation of the intensity ratio led to a large measurement error (approximately 9.1 K). Afterwards Raman images were acquired with various measurement conditions, and the influence of each parameter on the measurement error was quantitatively investigated. The apparent temperature variance was considerably reduced by increasing electron-multiplying gain and binning factor for spatial averaging, whereas an increase in the size of the measurement area resulted in a quadratic increase in the temperature variance due to the inhomogeneous excitation intensity. Finally, the requirements of the thermal flow conditions for the present methodology to be applied were quantitatively examined according to the measurement results.

元の言語English
記事番号14-00351
ジャーナルJournal of Thermal Science and Technology
9
発行部数2
DOI
出版物ステータスPublished - 2014 1 1

Fingerprint

tracing
Imaging techniques
Measurement errors
Velocity measurement
Hydrogen
Temperature distribution
Temperature
temperature distribution
temperature
Channel flow
Temperature measurement
Stretching
hydrogen
channel flow
Fluorescence
Hot Temperature
Calibration
velocity measurement
Wavelength
temperature measurement

ASJC Scopus subject areas

  • Atomic and Molecular Physics, and Optics
  • Materials Science(all)
  • Instrumentation
  • Engineering (miscellaneous)

これを引用

@article{55fc64a5af6448fd9fe1f9b75df53056,
title = "An investigation of measurement condition for non-intrusive velocity determination based on thermal tracing by Raman imaging",
abstract = "The present study proposes a velocity measurement based on thermal tracing by Raman imaging and investigates its applicability focusing on the error in temperature measurement, towards the establishment of a non-intrusive and micro-scale velocimetry. In order to realize fluorescence-free measurement, two-wavelength Raman imaging was employed to measure the temperature field in a channel flow. This technique exploits the contrasting temperature dependencies of hydrogen-bonded (HB) and non-hydrogen-bonded (NHB) OH stretching Raman bands of liquid water, and enables the determination of planar temperature distributions from the intensity ratio of the HB to NHB images. A calibration experiment showed a linear relationship between the temperature and the Raman intensity ratio in the range 293−333 K with temperature sensitivity of −0.56{\%} K-1. It was also confirmed that the spatial variation of the intensity ratio led to a large measurement error (approximately 9.1 K). Afterwards Raman images were acquired with various measurement conditions, and the influence of each parameter on the measurement error was quantitatively investigated. The apparent temperature variance was considerably reduced by increasing electron-multiplying gain and binning factor for spatial averaging, whereas an increase in the size of the measurement area resulted in a quadratic increase in the temperature variance due to the inhomogeneous excitation intensity. Finally, the requirements of the thermal flow conditions for the present methodology to be applied were quantitatively examined according to the measurement results.",
keywords = "Fluid velocity, Measurement condition, Non-intrusive measurement, Temperature measurement, Thermal tracing, Two-wavelength Raman imaging",
author = "Reiko Kuriyama and Yohei Sato",
year = "2014",
month = "1",
day = "1",
doi = "10.1299/jtst.2014jtst0014",
language = "English",
volume = "9",
journal = "Journal of Thermal Science and Technology",
issn = "1880-5566",
publisher = "Japan Society of Mechanical Engineers",
number = "2",

}

TY - JOUR

T1 - An investigation of measurement condition for non-intrusive velocity determination based on thermal tracing by Raman imaging

AU - Kuriyama, Reiko

AU - Sato, Yohei

PY - 2014/1/1

Y1 - 2014/1/1

N2 - The present study proposes a velocity measurement based on thermal tracing by Raman imaging and investigates its applicability focusing on the error in temperature measurement, towards the establishment of a non-intrusive and micro-scale velocimetry. In order to realize fluorescence-free measurement, two-wavelength Raman imaging was employed to measure the temperature field in a channel flow. This technique exploits the contrasting temperature dependencies of hydrogen-bonded (HB) and non-hydrogen-bonded (NHB) OH stretching Raman bands of liquid water, and enables the determination of planar temperature distributions from the intensity ratio of the HB to NHB images. A calibration experiment showed a linear relationship between the temperature and the Raman intensity ratio in the range 293−333 K with temperature sensitivity of −0.56% K-1. It was also confirmed that the spatial variation of the intensity ratio led to a large measurement error (approximately 9.1 K). Afterwards Raman images were acquired with various measurement conditions, and the influence of each parameter on the measurement error was quantitatively investigated. The apparent temperature variance was considerably reduced by increasing electron-multiplying gain and binning factor for spatial averaging, whereas an increase in the size of the measurement area resulted in a quadratic increase in the temperature variance due to the inhomogeneous excitation intensity. Finally, the requirements of the thermal flow conditions for the present methodology to be applied were quantitatively examined according to the measurement results.

AB - The present study proposes a velocity measurement based on thermal tracing by Raman imaging and investigates its applicability focusing on the error in temperature measurement, towards the establishment of a non-intrusive and micro-scale velocimetry. In order to realize fluorescence-free measurement, two-wavelength Raman imaging was employed to measure the temperature field in a channel flow. This technique exploits the contrasting temperature dependencies of hydrogen-bonded (HB) and non-hydrogen-bonded (NHB) OH stretching Raman bands of liquid water, and enables the determination of planar temperature distributions from the intensity ratio of the HB to NHB images. A calibration experiment showed a linear relationship between the temperature and the Raman intensity ratio in the range 293−333 K with temperature sensitivity of −0.56% K-1. It was also confirmed that the spatial variation of the intensity ratio led to a large measurement error (approximately 9.1 K). Afterwards Raman images were acquired with various measurement conditions, and the influence of each parameter on the measurement error was quantitatively investigated. The apparent temperature variance was considerably reduced by increasing electron-multiplying gain and binning factor for spatial averaging, whereas an increase in the size of the measurement area resulted in a quadratic increase in the temperature variance due to the inhomogeneous excitation intensity. Finally, the requirements of the thermal flow conditions for the present methodology to be applied were quantitatively examined according to the measurement results.

KW - Fluid velocity

KW - Measurement condition

KW - Non-intrusive measurement

KW - Temperature measurement

KW - Thermal tracing

KW - Two-wavelength Raman imaging

UR - http://www.scopus.com/inward/record.url?scp=85066749944&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85066749944&partnerID=8YFLogxK

U2 - 10.1299/jtst.2014jtst0014

DO - 10.1299/jtst.2014jtst0014

M3 - Article

AN - SCOPUS:85066749944

VL - 9

JO - Journal of Thermal Science and Technology

JF - Journal of Thermal Science and Technology

SN - 1880-5566

IS - 2

M1 - 14-00351

ER -