Analysis and optimization of BiCMOS gate circuits

Tadahiro Kuroda, Yoshinori Sakata, Kenji Matsuo

研究成果: Article査読

5 被引用数 (Scopus)

抄録

A comprehensive view of an optimization strategy for BiCMOS gates is described. A simple gate delay model is proposed. BiCMOS gate delay, when optimized, is found to be expressed as A + B√F, where F is fanout and A and B are coefficients. Since the coefficients can be extracted by SPICE simulation, the delay prediction can be precise, while keeping the delay formula simple enough for circuit designers to derive useful expressions. A procedure for optimizing BiCMOS gates is studied. BiCMOS gate delay can be calculated quickly and optimized efficiently just by looking up a design table which is obtained from SPICE simulations. The procedure for making the design table is technology-independent. Once obtained, the design table can be applied to any design with the same device technology. A sizing strategy of cascaded BiCMOS buffers is derived from the simple delay model. In a 0.8 μm, 9 GHz, BiCMOS process, a BiCMOS-BiCMOS cascaded buffer is optimized when the scale-up factor between two consecutive stages is e2.3 (≈10.0). A BiCMOS-CMOS cascaded buffer becomes the fastest when the scale-up factor, e1.6(≈5.0), is employed. The optimization procedure and the sizing strategy can be used for several variants of the basic BiCMOS gate, because the delay model is based on basic circuit models for the variants.

本文言語English
ページ(範囲)564-571
ページ数8
ジャーナルIEEE Journal of Solid-State Circuits
29
5
DOI
出版ステータスPublished - 1994 5 1
外部発表はい

ASJC Scopus subject areas

  • Electrical and Electronic Engineering

フィンガープリント 「Analysis and optimization of BiCMOS gate circuits」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル