ATM network resource management techniques for CBR virtual paths/channels

Youichi Sato, Naoaki Yamanaka, Ken Ichi Sato

研究成果: Article

4 引用 (Scopus)

抄録

SUMMARY The benefits of ATM techniques have been widely recognized and many organizations envisage the introduction of ATM techniques into their telecommunication networks. The ATM benefits can, however, be fully exploited only after effective network resource management techniques have been developed. This paper focuses on CBR-VP management techniques. The ATM transport network architecture and VP roles are summarized. Next, the issues of VP accommodation design are described. The point is how to create a design that accommodates cell loss and cell delay jitter, both of which depend on various network parameters and conditions. For this purpose, analytical procedures based on an M/D/1 queueing model are adopted. The approximation method is shown to be very effective in practical use through computer analysis. The method guarantees conservative QOSs. Finally, the proposed method is applied to several design examples to illustrate VP management issues. The proposed method will enable ATM techniques to be introduced to our telecommunication networks by the mid.

元の言語English
ページ(範囲)684-691
ページ数8
ジャーナルIEICE Transactions on Communications
E79-B
発行部数5
出版物ステータスPublished - 1996
外部発表Yes

Fingerprint

Asynchronous transfer mode
Automatic teller machines
Telecommunication networks
Network architecture
Jitter

ASJC Scopus subject areas

  • Electrical and Electronic Engineering
  • Computer Networks and Communications

これを引用

ATM network resource management techniques for CBR virtual paths/channels. / Sato, Youichi; Yamanaka, Naoaki; Sato, Ken Ichi.

:: IEICE Transactions on Communications, 巻 E79-B, 番号 5, 1996, p. 684-691.

研究成果: Article

@article{b492f4e4400048679bfd3884d1eca715,
title = "ATM network resource management techniques for CBR virtual paths/channels",
abstract = "SUMMARY The benefits of ATM techniques have been widely recognized and many organizations envisage the introduction of ATM techniques into their telecommunication networks. The ATM benefits can, however, be fully exploited only after effective network resource management techniques have been developed. This paper focuses on CBR-VP management techniques. The ATM transport network architecture and VP roles are summarized. Next, the issues of VP accommodation design are described. The point is how to create a design that accommodates cell loss and cell delay jitter, both of which depend on various network parameters and conditions. For this purpose, analytical procedures based on an M/D/1 queueing model are adopted. The approximation method is shown to be very effective in practical use through computer analysis. The method guarantees conservative QOSs. Finally, the proposed method is applied to several design examples to illustrate VP management issues. The proposed method will enable ATM techniques to be introduced to our telecommunication networks by the mid.",
keywords = "ATM, CBR, Cell delay variation, M/D/1, Quality of service",
author = "Youichi Sato and Naoaki Yamanaka and Sato, {Ken Ichi}",
year = "1996",
language = "English",
volume = "E79-B",
pages = "684--691",
journal = "IEICE Transactions on Communications",
issn = "0916-8516",
publisher = "Maruzen Co., Ltd/Maruzen Kabushikikaisha",
number = "5",

}

TY - JOUR

T1 - ATM network resource management techniques for CBR virtual paths/channels

AU - Sato, Youichi

AU - Yamanaka, Naoaki

AU - Sato, Ken Ichi

PY - 1996

Y1 - 1996

N2 - SUMMARY The benefits of ATM techniques have been widely recognized and many organizations envisage the introduction of ATM techniques into their telecommunication networks. The ATM benefits can, however, be fully exploited only after effective network resource management techniques have been developed. This paper focuses on CBR-VP management techniques. The ATM transport network architecture and VP roles are summarized. Next, the issues of VP accommodation design are described. The point is how to create a design that accommodates cell loss and cell delay jitter, both of which depend on various network parameters and conditions. For this purpose, analytical procedures based on an M/D/1 queueing model are adopted. The approximation method is shown to be very effective in practical use through computer analysis. The method guarantees conservative QOSs. Finally, the proposed method is applied to several design examples to illustrate VP management issues. The proposed method will enable ATM techniques to be introduced to our telecommunication networks by the mid.

AB - SUMMARY The benefits of ATM techniques have been widely recognized and many organizations envisage the introduction of ATM techniques into their telecommunication networks. The ATM benefits can, however, be fully exploited only after effective network resource management techniques have been developed. This paper focuses on CBR-VP management techniques. The ATM transport network architecture and VP roles are summarized. Next, the issues of VP accommodation design are described. The point is how to create a design that accommodates cell loss and cell delay jitter, both of which depend on various network parameters and conditions. For this purpose, analytical procedures based on an M/D/1 queueing model are adopted. The approximation method is shown to be very effective in practical use through computer analysis. The method guarantees conservative QOSs. Finally, the proposed method is applied to several design examples to illustrate VP management issues. The proposed method will enable ATM techniques to be introduced to our telecommunication networks by the mid.

KW - ATM

KW - CBR

KW - Cell delay variation

KW - M/D/1

KW - Quality of service

UR - http://www.scopus.com/inward/record.url?scp=0030142547&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0030142547&partnerID=8YFLogxK

M3 - Article

AN - SCOPUS:0030142547

VL - E79-B

SP - 684

EP - 691

JO - IEICE Transactions on Communications

JF - IEICE Transactions on Communications

SN - 0916-8516

IS - 5

ER -