Automated continuous-flow hydride generation with inductively coupled plasma mass spectrometric detection for the determination of trace amounts of selenium(IV), and total antimony, arsenic and germanium in sea-water

Sri Juari Santosa, Hiroshige Mokudai, Shigeru Tanaka

研究成果: Article査読

44 被引用数 (Scopus)

抄録

An automated continuous-flow hydride generation system was developed for the determination of trace amounts of SeIV and total Sb, As and Ge in sea-water using ICP-MS detection. Since the same responses can be obtained between the Sb species SbV and SbIII, among the As species AsV, AsIII, monomethylarsonic acid and dimethylarsinic acid, and between the Ge species GeIV and monomethylgermanium, a single Sb, As and Ge species can be used for calibration. A sensitivity enhancement was observed when methanol was used for matrix modification. Matrix modification was also useful for achieving recoveries close to 100% in recovery tests performed on a sea-water sample. Detection limits of 2.2 ng l-1 for Sb as SbIII, 6.5 ng l-1 for As as AsV, 2.4 ng l-1 for Ge as GeIV and 0.5 ng l-1 for SeIV were obtained. For replicate determinations in both a standard solution and a real sea-water sample, the repeatabilities were within 7% (as RSD). The proposed method is rapid (15 samples can be analysed per hour) and sufficiently sensitive to allow trace amounts of SeIV and total Sb, As and Ge to be directly determined in surface sea-water samples taken at a high latitude of the North Pacific Ocean from Japan to Canada.

本文言語English
ページ(範囲)409-415
ページ数7
ジャーナルJournal of Analytical Atomic Spectrometry
12
4
DOI
出版ステータスPublished - 1997 4

ASJC Scopus subject areas

  • 分析化学
  • 分光学

フィンガープリント

「Automated continuous-flow hydride generation with inductively coupled plasma mass spectrometric detection for the determination of trace amounts of selenium(IV), and total antimony, arsenic and germanium in sea-water」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル