This paper introduces a new self-adjusting active pull-down scheme for ECL circuit. The circuit offers self-terminating dynamic pull-down action by sensing the output level rather than using traditional load-dependent capacitive coupling. No capacitor or large resistor is required, and therefore it adds no process complexity and no area penalty. Implemented in an ECL gate array in a 1.2 μm double-poly self-aligned bipolar technology, the circuit offers 300-ps delay at a power consumption of 1 mW/gate under FO = 1 and CL = 0.55-pF loading condition. This is a 4.4 times speed improvement over the conventional ECL circuit. Furthermore, the circuit consumes only 0.25 mW for a gate speed of 700 ps/gate, which is a 1/7.8 power reduction compared with the conventional ECL circuit. The circuit requires a regulated reference voltage, which is also studied.
ASJC Scopus subject areas
- Electrical and Electronic Engineering