Consideration on function mode design for motion construction

Seiji Uozumi, Koyo Yu, Kouhei Ohnishi

研究成果: Conference contribution

抄録

With the development of robot technology, the activities of robots are expected to enter the human environment. Robots in human environment need the large-scale system with multi-degrees-of freedom for environmental adaptation. Therefore, it is necessary to design a large-scale system efficiently and simply. Tsuji et al. proposed function based control method. This method decouples a large control system into small independent components called 'function' extracted by the 'function mode'. However, design method of function mode has not been clarified. Therefore, this paper considers the design method of function modes by fragmentation of the function mode. By using this method, independent control of complex tasks can be achieved. This method can be a guide for designing complex functions and improve the adaptability to a designer's intention and unknown environment. Proposed method is implemented in hybrid control system using three robot arms and each robot arm has two degrees of freedom. The validity of proposed method is verified by the experimental results.

本文言語English
ホスト出版物のタイトルProceedings - 2015 IEEE International Conference on Mechatronics, ICM 2015
出版社Institute of Electrical and Electronics Engineers Inc.
ページ40-45
ページ数6
ISBN(電子版)9781479936335
DOI
出版ステータスPublished - 2015 4 9
イベント2015 IEEE International Conference on Mechatronics, ICM 2015 - Nagoya, Japan
継続期間: 2015 3 62015 3 8

出版物シリーズ

名前Proceedings - 2015 IEEE International Conference on Mechatronics, ICM 2015

Other

Other2015 IEEE International Conference on Mechatronics, ICM 2015
国/地域Japan
CityNagoya
Period15/3/615/3/8

ASJC Scopus subject areas

  • 電子工学および電気工学
  • 機械工学

フィンガープリント

「Consideration on function mode design for motion construction」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル