Thermal and electrical conduction parameters of the sintered PbTe with different crystal grain sizes Ds were measured over the temperature range from 77 to 350 K, to examine the objective of this study is to examine the possibility of improvement in thermoelectric performance for sintered PbTe by reducing D. The starting powders with particle sizes of 6, 39, 180 and 380 μm were obtained by pulverizing undoped PbTe boule prepared by Bridgman method. Sintering was carried out by spark plasma sintering technique (SPS) under the conditions of sintering temperature of 732-803 K, sintering duration of 60-90 min and sintering pressure of 45 MPa. All the sintered compacts, whose conduction type were p-type, had apparent relative density of more than 99%. Thermal conductivity κ decreased with reducing D below 200 K, while showed no dependence on D above 200 K. Long-wave phonons are scattered efficiently at grain boundaries only below 200 K. Hall mobility μH of the sintered compacts with different Ds were almost same above 200 K. It is concluded that thermoelectric performance for sintered PbTe is not directly affected by controlling D.
|出版ステータス||Published - 1997 12 1|
|イベント||Proceedings of the 1997 16th International Conference on Thermoelectrics, ICT'97 - Dresden, Ger|
継続期間: 1997 8 26 → 1997 8 29
|Other||Proceedings of the 1997 16th International Conference on Thermoelectrics, ICT'97|
|Period||97/8/26 → 97/8/29|
ASJC Scopus subject areas