DEMO reactor design based on inductively-operated tokamak plasmas

Y. Ogawa, N. Inoue, T. Yamamoto, K. Okano, J. F. Wang

研究成果: Paper査読

抄録

Based on scientific knowledge available from ITER plasmas and advancement of fusion nuclear technology from the near-term R&D program, a low wall-loading DEMO fusion reactor has been designed, where high priority has been given to the early and reliable realization of a tokamak fusion plasma over the cost performance. Since a major radius of this DEMO reactor is increased up to 10 m, a plasma ignition is achievable with a low fusion power of 0.8 GW and an operation period of 4 approx. 5 hours is available only with inductive current drive. The low ignition power makes it possible to adopt an austenitic stainless steel, which have a plenty of experiences under the neutron irradiation in fission reactors. In step with development of advanced materials, step-wise increase of the fusion power seems to be feasible and realistic, because this DEMO reactor has a potentiality to produce a fusion power of approx. 5 GW.

本文言語English
ページ1190-1193
ページ数4
出版ステータスPublished - 1995
イベントProceedings of the 1995 16th IEEE/NPSS Symposium on Fusion Engineering. Part 1 (of 2) - Champaign, IL, USA
継続期間: 1995 10月 11995 10月 5

Other

OtherProceedings of the 1995 16th IEEE/NPSS Symposium on Fusion Engineering. Part 1 (of 2)
CityChampaign, IL, USA
Period95/10/195/10/5

ASJC Scopus subject areas

  • 核物理学および高エネルギー物理学
  • 原子力エネルギーおよび原子力工学

フィンガープリント

「DEMO reactor design based on inductively-operated tokamak plasmas」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル