Design of a current-driven 2×2 optical switch using phase-change material

Kentaro Kato, Hiroyuki Tsuda

    研究成果: Conference contribution

    1 引用 (Scopus)

    抜粋

    We proposed and designed a current-driven 2×2 optical switch using Si waveguides and phase-change material. The structure of the phase shifter was optimized to reduce the required switching energy and insertion loss. The PCM film is 1.1 μm long and the maximum switching energy is 3.05 nJ. In the bar port state, the insertion loss is 2.84 dB, and in the cross port state, it is 0.75 dB.

    元の言語English
    ホスト出版物のタイトル2015 International Conference on Photonics in Switching, PS 2015
    出版者Institute of Electrical and Electronics Engineers Inc.
    ページ205-207
    ページ数3
    ISBN(印刷物)9781479988211
    DOI
    出版物ステータスPublished - 2015 11 13
    イベントInternational Conference on Photonics in Switching, PS 2015 - Florence, Italy
    継続期間: 2015 9 222015 9 25

    Other

    OtherInternational Conference on Photonics in Switching, PS 2015
    Italy
    Florence
    期間15/9/2215/9/25

    ASJC Scopus subject areas

    • Electrical and Electronic Engineering

    フィンガープリント Design of a current-driven 2×2 optical switch using phase-change material' の研究トピックを掘り下げます。これらはともに一意のフィンガープリントを構成します。

  • これを引用

    Kato, K., & Tsuda, H. (2015). Design of a current-driven 2×2 optical switch using phase-change material. : 2015 International Conference on Photonics in Switching, PS 2015 (pp. 205-207). [7329001] Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/PS.2015.7329001