Design of photonics polymers for optimum birefringence and liquid crystal displays

Akihiro Tagaya, Yasuhiro Koike

研究成果: Paper査読

抄録

We demonstrate that it is possible to synthesize a polymer that exhibits no orientational birefringence and no photoelastic birefringence using two methods. In these methods, the contributions of monomers and an anisotropic dopant to orientational birefringence and photoelastic birefringence are analyzed experimentally, after which the composition of a ternary copolymer or a binary copolymer including the dopant is adjusted, based on the results, to compensate for both types of birefringence. By the methods and fine adjustment of the composition, we synthesized poly(methyl methacrylate (MMA)/2,2,2- trifluoroethyl methacrylate (3FMA)/benzyl methacrylate = 52.0/42.0/6.0(w/w/w)) and poly(MMA/3FMA = 85.0/15.0(w/w)) containing 2.8 wt% of trans-stilbene that exhibited close to zero birefringence.

本文言語English
ページ3270-3271
ページ数2
出版ステータスPublished - 2006 12月 1
イベント55th Society of Polymer Science Japan Symposium on Macromolecules - Toyama, Japan
継続期間: 2006 9月 202006 9月 22

Other

Other55th Society of Polymer Science Japan Symposium on Macromolecules
国/地域Japan
CityToyama
Period06/9/2006/9/22

ASJC Scopus subject areas

  • 工学(全般)

フィンガープリント

「Design of photonics polymers for optimum birefringence and liquid crystal displays」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル