Detailed finite element analysis of composite beam under cyclic loads

Takuzo Yamashita, Makoto Ohsaki, Masayuki Kohiyama, Tomoshi Miyamura, Jingyao Zhang, Hiroyuki Tagawa

研究成果: Article査読

4 被引用数 (Scopus)

抄録

Modeling and numerical simulation techniques for performing a detailed finite element analysis of a composite beam are presented. The finite element analysis is performed using E-Simulator, which is under development at the Hyogo Earthquake Engineering Research Center (E-Defense) of the National Research Institute for Earth Science and Disaster Prevention (NIED). A piecewise linear isotropic-kinematic hardening law is used for the steel material, and heuristic and implicit rules are incorporated to simulate its complex cyclic elastoplastic behavior. The extended Drucker-Prager model is used for the concrete material. The steel beam, steel column and reinforced concrete slab are discretized into solid elements. The wire mesh consisting of steel bars in the slab is also modeled using solid elements and rigid beams are used for the stud bolts. Detailed analyses are carried out for both a steel beam and a composite beam subjected to static cyclic loading. Good agreement is found with experimental results such as strength degradation due to local buckling of the flange, and asymmetric behaviors resulting from contact between the slab and the column.

本文言語English
ページ(範囲)1481-1490
ページ数10
ジャーナルJournal of Structural and Construction Engineering
79
704
DOI
出版ステータスPublished - 2014 10 1

ASJC Scopus subject areas

  • Architecture
  • Building and Construction

フィンガープリント 「Detailed finite element analysis of composite beam under cyclic loads」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル