Development and Continuous Operation of a Bench-Scale System for the Production of O3 + O2 + CO2 Hydrates

Tomomi Hatsugai, Ryutaro Nakayama, Shigeo Tomura, Ryo Akiyoshi, Shirou Nishitsuka, Ryo Nakamura, Satoshi Takeya, Ryo Ohmura

研究成果: Article査読

1 被引用数 (Scopus)

抄録

Ozone (O3) has many industrial applications such as in sterilization. One of the long-term O3 preservation methods is molecular storage in clathrate hydrate. In this study, an experimental system was developed for continuously forming O3 + O2 + CO2 hydrates. The parameters that affect the continuous operation of the system and that lead to increases in the concentration of O3 in the hydrates were also experimentally evaluated, implementing the method of quality engineering. After optimizing these operating parameters, the O3 storage capacity in the hydrates was measured to be 0.26 wt % at 2 h of total operation time. By X-ray diffraction, it was found that the produced sample contained hydrates, and long-term preservation for 6 months was possible at the temperature of general freezing warehouses.

本文言語English
ページ(範囲)2307-2314
ページ数8
ジャーナルChemical Engineering and Technology
43
11
DOI
出版ステータスPublished - 2020 11 1

ASJC Scopus subject areas

  • Chemistry(all)
  • Chemical Engineering(all)
  • Industrial and Manufacturing Engineering

フィンガープリント 「Development and Continuous Operation of a Bench-Scale System for the Production of O<sub>3</sub> + O<sub>2</sub> + CO<sub>2</sub> Hydrates」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル