Development of high-frequency pulse detonation combustor without purging material

Kohei Muto, Ken Matsuoka, Jiro Kasahara, Hiroaki Watanabe, Akiko Matsuo, Takuma Endo

研究成果: Conference contribution

抄録

A novel method for the operation of a pulse detonation combustor (PDC) was proposed and demonstrated for realizing pure fuel-oxygen combustion at high frequencies without using a purging material. In the developed operation method, a gaseous oxidizer (oxygen) is supplied to the PDC in the valveless mode. Fuel, which is supercritical ethylene, is injected into the PDC at a suitable timing using an automotive fuel injector. flowing to an irreversible isenthalpic change, which is called the Joule–Thomson effect, a phase transition of ethylene from the supercritical state to a low-temperature vapor occurs and a detonable mixture is produced by mixing with oxygen. In demonstration experiments, a small PDC having an inner diameter of 10 mm, a total length of 190 mm, and an inner volume of 14.5 mL was used, and the operation frequency was varied between 100 and 500 Hz. The measured flame propagation speeds were 107 ± 6% of the Chapman–Jouguet detonation speed. In addition, the operation frequency of 500 Hz was 41% of the gas-dynamic upper limit, which was obtained using the one-dimensional model proposed by Endo et al. [AIAA J., Vol. 42, No. 9, 2004, pp. 1921-1930].

元の言語English
ホスト出版物のタイトル54th AIAA Aerospace Sciences Meeting
出版者American Institute of Aeronautics and Astronautics Inc, AIAA
ISBN(印刷物)9781624103933
出版物ステータスPublished - 2016
イベント54th AIAA Aerospace Sciences Meeting, 2016 - San Diego, United States
継続期間: 2016 1 42016 1 8

Other

Other54th AIAA Aerospace Sciences Meeting, 2016
United States
San Diego
期間16/1/416/1/8

Fingerprint

Purging
Detonation
Combustors
Oxygen
Ethylene
Automotive fuels
Gas dynamics
Demonstrations
Phase transitions
Vapors
Experiments

ASJC Scopus subject areas

  • Aerospace Engineering

これを引用

Muto, K., Matsuoka, K., Kasahara, J., Watanabe, H., Matsuo, A., & Endo, T. (2016). Development of high-frequency pulse detonation combustor without purging material. : 54th AIAA Aerospace Sciences Meeting American Institute of Aeronautics and Astronautics Inc, AIAA.

Development of high-frequency pulse detonation combustor without purging material. / Muto, Kohei; Matsuoka, Ken; Kasahara, Jiro; Watanabe, Hiroaki; Matsuo, Akiko; Endo, Takuma.

54th AIAA Aerospace Sciences Meeting. American Institute of Aeronautics and Astronautics Inc, AIAA, 2016.

研究成果: Conference contribution

Muto, K, Matsuoka, K, Kasahara, J, Watanabe, H, Matsuo, A & Endo, T 2016, Development of high-frequency pulse detonation combustor without purging material. : 54th AIAA Aerospace Sciences Meeting. American Institute of Aeronautics and Astronautics Inc, AIAA, 54th AIAA Aerospace Sciences Meeting, 2016, San Diego, United States, 16/1/4.
Muto K, Matsuoka K, Kasahara J, Watanabe H, Matsuo A, Endo T. Development of high-frequency pulse detonation combustor without purging material. : 54th AIAA Aerospace Sciences Meeting. American Institute of Aeronautics and Astronautics Inc, AIAA. 2016
Muto, Kohei ; Matsuoka, Ken ; Kasahara, Jiro ; Watanabe, Hiroaki ; Matsuo, Akiko ; Endo, Takuma. / Development of high-frequency pulse detonation combustor without purging material. 54th AIAA Aerospace Sciences Meeting. American Institute of Aeronautics and Astronautics Inc, AIAA, 2016.
@inproceedings{4d51cd7bdb9c4de9b597c3ca5946fbc9,
title = "Development of high-frequency pulse detonation combustor without purging material",
abstract = "A novel method for the operation of a pulse detonation combustor (PDC) was proposed and demonstrated for realizing pure fuel-oxygen combustion at high frequencies without using a purging material. In the developed operation method, a gaseous oxidizer (oxygen) is supplied to the PDC in the valveless mode. Fuel, which is supercritical ethylene, is injected into the PDC at a suitable timing using an automotive fuel injector. flowing to an irreversible isenthalpic change, which is called the Joule–Thomson effect, a phase transition of ethylene from the supercritical state to a low-temperature vapor occurs and a detonable mixture is produced by mixing with oxygen. In demonstration experiments, a small PDC having an inner diameter of 10 mm, a total length of 190 mm, and an inner volume of 14.5 mL was used, and the operation frequency was varied between 100 and 500 Hz. The measured flame propagation speeds were 107 ± 6{\%} of the Chapman–Jouguet detonation speed. In addition, the operation frequency of 500 Hz was 41{\%} of the gas-dynamic upper limit, which was obtained using the one-dimensional model proposed by Endo et al. [AIAA J., Vol. 42, No. 9, 2004, pp. 1921-1930].",
author = "Kohei Muto and Ken Matsuoka and Jiro Kasahara and Hiroaki Watanabe and Akiko Matsuo and Takuma Endo",
year = "2016",
language = "English",
isbn = "9781624103933",
booktitle = "54th AIAA Aerospace Sciences Meeting",
publisher = "American Institute of Aeronautics and Astronautics Inc, AIAA",

}

TY - GEN

T1 - Development of high-frequency pulse detonation combustor without purging material

AU - Muto, Kohei

AU - Matsuoka, Ken

AU - Kasahara, Jiro

AU - Watanabe, Hiroaki

AU - Matsuo, Akiko

AU - Endo, Takuma

PY - 2016

Y1 - 2016

N2 - A novel method for the operation of a pulse detonation combustor (PDC) was proposed and demonstrated for realizing pure fuel-oxygen combustion at high frequencies without using a purging material. In the developed operation method, a gaseous oxidizer (oxygen) is supplied to the PDC in the valveless mode. Fuel, which is supercritical ethylene, is injected into the PDC at a suitable timing using an automotive fuel injector. flowing to an irreversible isenthalpic change, which is called the Joule–Thomson effect, a phase transition of ethylene from the supercritical state to a low-temperature vapor occurs and a detonable mixture is produced by mixing with oxygen. In demonstration experiments, a small PDC having an inner diameter of 10 mm, a total length of 190 mm, and an inner volume of 14.5 mL was used, and the operation frequency was varied between 100 and 500 Hz. The measured flame propagation speeds were 107 ± 6% of the Chapman–Jouguet detonation speed. In addition, the operation frequency of 500 Hz was 41% of the gas-dynamic upper limit, which was obtained using the one-dimensional model proposed by Endo et al. [AIAA J., Vol. 42, No. 9, 2004, pp. 1921-1930].

AB - A novel method for the operation of a pulse detonation combustor (PDC) was proposed and demonstrated for realizing pure fuel-oxygen combustion at high frequencies without using a purging material. In the developed operation method, a gaseous oxidizer (oxygen) is supplied to the PDC in the valveless mode. Fuel, which is supercritical ethylene, is injected into the PDC at a suitable timing using an automotive fuel injector. flowing to an irreversible isenthalpic change, which is called the Joule–Thomson effect, a phase transition of ethylene from the supercritical state to a low-temperature vapor occurs and a detonable mixture is produced by mixing with oxygen. In demonstration experiments, a small PDC having an inner diameter of 10 mm, a total length of 190 mm, and an inner volume of 14.5 mL was used, and the operation frequency was varied between 100 and 500 Hz. The measured flame propagation speeds were 107 ± 6% of the Chapman–Jouguet detonation speed. In addition, the operation frequency of 500 Hz was 41% of the gas-dynamic upper limit, which was obtained using the one-dimensional model proposed by Endo et al. [AIAA J., Vol. 42, No. 9, 2004, pp. 1921-1930].

UR - http://www.scopus.com/inward/record.url?scp=85007623496&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85007623496&partnerID=8YFLogxK

M3 - Conference contribution

AN - SCOPUS:85007623496

SN - 9781624103933

BT - 54th AIAA Aerospace Sciences Meeting

PB - American Institute of Aeronautics and Astronautics Inc, AIAA

ER -