Differential pressure sensor using a piezoresistive cantilever

Hidetoshi Takahashi, Nguyen Minh Dung, Kiyoshi Matsumoto, Isao Shimoyama

研究成果: Article査読

99 被引用数 (Scopus)

抄録

This paper reports on a differential pressure sensor using a piezoresistive cantilever with the dimensions of 125 m×100 μm×0.3 μm. The sensor has a higher sensitivity than a traditional diaphragm sensor because of the three free edges of the cantilever. The measured results indicated that the fabricated cantilever bent according to theory when differential pressure was applied. The sensitivity and resolution of the differential pressure were 3.2×10 4Pa 1and 0.02 Pa from20 Pa to 20 Pa, respectively.

本文言語English
論文番号055015
ジャーナルJournal of Micromechanics and Microengineering
22
5
DOI
出版ステータスPublished - 2012 5
外部発表はい

ASJC Scopus subject areas

  • 電子材料、光学材料、および磁性材料
  • 材料力学
  • 機械工学
  • 電子工学および電気工学

フィンガープリント

「Differential pressure sensor using a piezoresistive cantilever」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル