Dynamical behavior of noncontact driving cam mechanism using permanent magnets

Toyoki Takazakura, Toshio Morita, Toshihiko Sugiura

研究成果: Article査読

2 被引用数 (Scopus)

抄録

In general cam mechanisms, mechanical contact between a cam driver and a cam follower causes problems such as frictional wear, needs for lubrication and noise. Accordingly, we proposed a new cam mechanism whose contact parts are replaced by permanent magnets exerting repulsive force on each other. The purpose of this study is to investigate the efficacy of the mechanism which can drive without mechanical contact. To evaluate the effectiveness of the mechanism, we constructed an analytical model, derived an equation of motion of the cam follower and conducted numerical calculation of it. Furthermore, we conducted experiments corresponding to the model. As a result, occurrence of superharmonic resonance and collision of the driver and the follower in the neighborhood of the primary resonance point were observed. However, except in occurrence region of them, the rotating motion of the driver was favorably converted into reciprocating motion of the follower without contact. Thus we concluded that a magnetic cam is useful at appropriate rotational speed of the driver.

本文言語English
ページ(範囲)169-174
ページ数6
ジャーナルInternational Journal of Applied Electromagnetics and Mechanics
52
1-2
DOI
出版ステータスPublished - 2016

ASJC Scopus subject areas

  • 電子材料、光学材料、および磁性材料
  • 凝縮系物理学
  • 材料力学
  • 機械工学
  • 電子工学および電気工学

フィンガープリント

「Dynamical behavior of noncontact driving cam mechanism using permanent magnets」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル