Estimation of static strength of adhesively bonded single lap joints with an acrylic adhesive under tensile shear condition based on cohesive zone model

Makoto Imanaka, Masaki Omiya, Noriaki Taguchi

研究成果: Article査読

2 被引用数 (Scopus)

抄録

In this study, the tensile shear and bending tests of adhesively bonded single lap joints with the acrylic adhesive was evaluated experimentally and numerically. In the previous paper, the traction-separation laws in mode 1 and mode 2 for an acrylic adhesive were directly obtained from the observation of failure process using Arcan type adhesively bonded specimens: simultaneous measurements of the J-integral and the opening displacements in the directions normal, δ n and tangential to the adhesive layer, δ s respectively. The experimental results were compared with numerical simulations conducted in ABAQUS including cohesive damage model. The cohesive laws obtained in the previous paper were simplified to trapezoidal shape from the experimentally obtained ones which were indicated in the previous paper. A good agreement was found between the experimental and numerical results. Then, to investigate the damage evolution in the adhesive layer for some lap joints, microscopic video observation was conducted near the end of the adhesive layer, and the video image have been compared with the contours of damage variable obtained by FEM corresponding to the video images. The observed damage evolution also agrees with the trend of damage variable.

本文言語English
ページ(範囲)660-674
ページ数15
ジャーナルJournal of Adhesion Science and Technology
33
6
DOI
出版ステータスPublished - 2019 3 19

ASJC Scopus subject areas

  • 化学 (全般)
  • 材料力学
  • 表面および界面
  • 表面、皮膜および薄膜
  • 材料化学

フィンガープリント

「Estimation of static strength of adhesively bonded single lap joints with an acrylic adhesive under tensile shear condition based on cohesive zone model」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル